How to Clean Gold

PDF download Download Article
PDF download Download Article

The glowing beauty of gold makes it one of the most desired metals in the world. While gold doesn’t tarnish very easily, it can be daunting to clean when it does. Gold is soft, easily scratched, and valuable. However, with some care, attention, and the proper cleaning methods, your gold’s beauty will last for generations.

Method 1
Method 1 of 4:

Using Mild Dish Soap

PDF download Download Article
  1. This method is the gentlest way to clean gold. If the gold is a very soft 18- or 24-karat gold, it may be scratched by other methods. However, the cleaning agents in the dish soap may loosen gemstones, diamonds, and other set stones.
    • If you think a stone may be coming loose on your jewelry, take it to a jeweler to be reset. Otherwise it may fall out and get lost.
  2. Watermark wikiHow to Clean Gold
    Pour about a tablespoon of dish soap into a dry glass bowl. [1] Adding the soap before the water will help the dish soap mix in evenly. Next, fill the bowl with water. [2] The water should be hot, but not so hot that you can’t touch it.
    • If you’re cleaning gold jewelry set with pearls, add a few drops of baby oil to the cleaning mixture. This will help protect the pearls from damage. [3]
    Advertisement
  3. Watermark wikiHow to Clean Gold
    Let the gold soak in the soapy water for about fifteen minutes before scrubbing it to loosen oils and grime. If you’re cleaning jewelry with pearls, stones, or settings, skip the soaking and immediately start cleaning the jewelry. Clean the gold by scrubbing it with a clean, soft bristled toothbrush. [4] Take care not to scratch the surface.
    • If you don’t want to use a toothbrush, you can also use an eyebrow brush or a brush made specifically for cleaning jewelry.
    • Use a new toothbrush when cleaning jewelry. Old toothbrushes may have toothpaste residue that will scratch the gold.
  4. Watermark wikiHow to Clean Gold
    Rinse the gold over a strainer or glass bowl to prevent it from washing down the drain. Alternatively, plug your sink to while rinsing to avoid losing jewelry. Rinse the jewelry thoroughly to remove all the detergent. Dried detergent residue can leave an unattractive film on gold.
    5. Advertisement
Method 2
Method 2 of 4:

Cleaning with Baking Soda and Vinegar

PDF download Download Article
  1. This technique is not as gentle as using soap and water. However, the cleaning agents in the baking soda and the acid from the vinegar will quickly clear any grime from metal.
    • Avoid using this technique on jewelry with stones, pearls, or settings. The vinegar and baking soda may loosen the settings and damage the jewelry.
  2. Watermark wikiHow to Clean Gold
    Mix ¼ cup baking soda with 2 tablespoons of warm water in a glass bowl. Stir the mixture together to make a thick paste. If the mixture is too runny, sprinkle in some baking soda. If it’s too thick, add a few more drops of water.
  3. Watermark wikiHow to Clean Gold
    Use a sponge, soft cloth, or soft toothbrush to transfer the baking soda paste to the gold. Gently rub the mixture into the surface of the gold, taking care to reach all the nooks and crannies. However, be careful not to scratch the gold with the toothbrush.
  4. First, rinse the gold with vinegar. Any kind of white cooking vinegar will work. If you work over a sink, rinse the gold in a sieve or plug the sink to avoid losing the gold down the drain. Next, thoroughly rinse the gold with warm tap water to wash away the vinegar.
    • If you’re cleaning gold with gemstones, pearls, or settings, like a ring or earrings, skip the vinegar and rinse the baking soda off with warm water.
    5. Advertisement
Method 3
Method 3 of 4:

Washing Gold with Ammonia

PDF download Download Article
  1. Ammonia is a very powerful cleaner and can remove the most stubborn greasy gunk from gold. This technique will also clean diamonds that are set into the gold. [6] However, use this method sparingly. Ammonia can discolor and corrode metal over time.
    • Ammonia can damage almost all gemstones, pearls, and stones. Diamonds are the exception.
  2. Watermark wikiHow to Clean Gold
    Add six parts water and one part ammonia to a glass bowl or cup. For example, if you use six tablespoons of water, add one tablespoon of ammonia. Use enough liquid that the gold will be completely submerged in the bowl or cup.
  3. Let the gold soak for up to 60 seconds. If you let it soak too long, the ammonia may damage or discolor gold. [7] If you see any hardened debris, gently wipe the gold with a soft cloth after removing it from the ammonia.
    • Handle the freshly cleaned gold with care to avoid scratching it.
  4. Use a sieve when rinsing the gold or plug up your sink. Otherwise, you may lose your gold down the drain. Make sure to thoroughly rinse away the ammonia. Any ammonia left on the surface of the metal will continue to corrode the metal.
    5. Advertisement
Method 4
Method 4 of 4:

Adding Finishing Touches

PDF download Download Article
  1. Let the gold air dry overnight in a secure spot. Alternatively, buff the clean gold dry for immediate use. Use a soft, dry polishing cloth, a fresh microfiber towel, or a scrap piece of cotton fabric. The softer the fabric, the less likely it is that the gold will be scratched.
    • If you let the gold air dry, store it in a spot that doesn’t see a lot of activity. Otherwise, the gold may be knocked off its perch and lost.
    • Buff air-dried gold with a soft towel to make it shine.
  2. Once the jewelry is clean and dry, carefully inspect any gemstones or settings. To do so, gently wiggle the stone with your finger. If anything has come loose, immediately take it to a jeweler for repair. Otherwise, the stone may fall out and get lost.
    • Place the jewelry in a plastic sealable bag while traveling to the jeweler. If the stone falls out, it will stay in the bag.
  3. Watermark wikiHow to Clean Gold
    Clean a pearl by buffing the surface with a soft cloth dotted with olive oil. [8] Avoid using detergents on pearls as this can cause discoloration. Similarly, clean gemstones with a wet cotton cloth and buff them with a soft, dry cloth until they shine.
    • If your gemstones are especially dirty, see a professional jeweler. They may have to sand the gemstone to clean it properly.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Reader Videos

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • It’s possible to clean jewelry too often, especially when using ammonia. Keep your jewelry clean so that you only have to wash it once a year or so.
        Thanks
        Helpful 1 Not Helpful 1
      Advertisement

      You Might Also Like

      How to
      Use a Ratchet Strap
      How to
      Use a Light Timer
      Homemade Dawn Powerwash: Easy Recipe for Refills
      Moving a Vehicle’s Electric Power Seat Forward or Back Manually
      5 Ways to Reset Any Maytag Washing Machine
      How to
      Make a Smokeless Fire Pit
      How to
      Fix a Leaky Sink Trap
      How to
      Make a Drone
      Safe & Effective Ways to Clean & Unclog Any Sink Drain
      How to
      Paint on Plastic
      How to
      Clean a USB C Charging Port
      How to
      Adjust a Lazy Susan
      How to
      Adjust a Furnace Gas Valve
      How to
      Disassemble and Clean a Honeywell Quietset Tower Fan
      Advertisement

      References

      1. ↑ Edward Lewand. Graduate Gemologist & Accredited Appraiser. Expert Interview. 6 August 2019.
      2. ↑ http://www.howtocleanthings.com/jewelry/how-to-clean-gold/
      3. ↑ http://www.cleaningservicenewyorkcity.com/safely-cleaning-jewelry.html
      4. ↑ Edward Lewand. Graduate Gemologist & Accredited Appraiser. Expert Interview. 6 August 2019.
      5. ↑ Edward Lewand. Graduate Gemologist & Accredited Appraiser. Expert Interview. 6 August 2019.
      6. ↑ http://www.cleaningservicenewyorkcity.com/safely-cleaning-jewelry.html
      7. ↑ https://www.howtocleanstuff.net/how-to-clean-gold/
      8. ↑ http://www.cleaningservicenewyorkcity.com/safely-cleaning-jewelry.html

      About This Article

      Article Summary X

      To clean gold, start by pouring 1 tablespoon of dish soap into a bowl, and fill the bowl with warm water to create the cleaning agent. Then, place the gold into the water and let it soak for 15 minutes before scrubbing with a soft-bristled toothbrush or jewelry brush. Once the gold has been scrubbed, cover the drain of the sink and rinse the gold under warm water to remove any soapy residue. If your gold has gemstones or other settings, refrain from soaking the jewelry, and simply scrub it with the soapy water. For more tips, including when to clean your gold with baking soda and vinegar, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 57,574 times.

      Did this article help you?

      Advertisement