PDF download Download Article
Simple care tips to extend the lifespan of a wooden cutting board
PDF download Download Article

With the right care, a wooden cutting board can last for years. But because wood is porous, moisture and bacteria can get into the wood grain, and this can damage the board or make it unsafe to use. We talked to cleaning experts Raymond Chiu and James Sears and personal chef Julien Miller to find out the best way to clean, sanitize, and care for your wooden cutting board.

Cleaing a Wooden Cutting Board: Quick Steps

  1. Use a knife or spatula to scrape off any food particles.
  2. Wash the cutting board with warm, soapy water.
  3. Sanitize the board with diluted bleach if you used it for raw meat or produce.
  4. Pat the cutting board dry, then prop it up to finish air drying.
  5. Oil the board about once a month to help it resist water.
Section 1 of 3:

How to Clean a Wooden Cutting Board

PDF download Download Article
  1. Use a spatula, bench scraper , or dull knife to gently scrape away any food on the surface of the cutting board. Because it’s best to minimize how much water you use on your cutting board, it can be helpful to dry clean stuck-on particles before you start washing. [1]
    • Don’t gouge your scraper into the wood—if anything is stubbornly stuck to the cutting board, you can remove it during the washing process.
  2. Chiu recommends using a “stiff brush or sponge with dish soap and warm water” to clean your wooden cutting board. Sears agrees, and adds that you should “be sure to scrub any food spots away.”
    • Don’t submerge the cutting board in a sink full of water as you’re cleaning—only use as much water as you need.
    Advertisement
  3. If you’ve scraped and scrubbed your board and there are food particles you just can’t remove, cover the food with 3% hydrogen peroxide, baking soda, vinegar, or lemon juice. Let it sit on the stain for about 5 minutes, then continue cleaning. [2]
    • You can also use these to remove food stains from the board.
  4. Be sure to get water on every side of the wood—top, bottom, and side edges. If only one side gets wet, the wood will swell unevenly, which can lead to warping and cracking. [3]
    • Don’t soak the cutting board in water. Instead, pour the clean water over the board until it’s fully rinsed.
  5. Sprinkle salt over the top of the cutting board, then scrub the salt into the board with the cut side of a lemon half. If there are any stains on the cutting board, squeeze a little extra lemon juice on the area and let it sit while you finish cleaning the rest of the board. When you’re finished, rinse the board well. [4]
    • Chiu agrees that scrubbing the board with salt will help you get food particles out of the “smaller crevices and cracks in the board,” but he prefers to skip the lemon and just “rub the salt into the board with a towel.”
    • You probably won’t need to do this every time you clean the cutting board, but it’s a good idea if you start to notice discoloration or odors on your board.
  6. When you’re finished cleaning the board, gently pat away any moisture with a clean, dry cloth or paper towels. Then, sit the cutting board upright on its side, leaned against a wall or the side of your sink. That way, air will circulate around the board so it can dry completely. [5]
    • If the cutting board dries unevenly, the wood can warp and crack.
    • If you’re going to sanitize the cutting board, you can wait to dry it until you’re finished with that.
  7. Advertisement
Section 2 of 3:

Sanitizing and Deodorizing a Wooden Cutting Board

PDF download Download Article
  1. You probably know that you need to sanitize any surface that comes into contact with raw meat, poultry, fish, or seafood, but you might be surprised to learn that you need to sanitize surfaces after you cut fruits and vegetables, too. [6] Raw produce can carry germs like Salmonella, Listeria, and E. coli, all of which can make you sick. [7]
    • Wash your fruits and vegetables before you cut them. This will typically make them safe to eat, but for extra safety, you should still sanitize your cutting board afterward.
  2. Add 1 US tbsp (15 ml) of unscented chlorine bleach to 1 US gal (3.8 l) of water. Generously pour the bleach mixture over every surface of the cutting board. [8]
    • If you prefer to avoid bleach, sanitize the board with undiluted white vinegar followed by 3% hydrogen peroxide. [9]
    • You can also use a commercial food-safe sanitizer , if you prefer. [10]
  3. If your wooden cutting board starts to develop a musty odor, Chiu recommends wiping it down with a cloth dampened with hydrogen peroxide. You can also use lemon juice, or white vinegar.
    • This will help kill any bacteria that’s causing odors in the wood.
  4. Use a clean towel or paper towels to pat the excess moisture off of the wood. Then, prop the cutting board up so it can air dry. [11]
    • Don’t let any moisture sit on the board—this can allow bacteria to return, so your board won’t be sanitized.
  5. Advertisement
Section 3 of 3:

Caring for a Wooden Cutting Board

PDF download Download Article
  1. Never put a wooden cutting board in the dishwasher or soak it in the sink. Wood is absorbent, and according to Sears, leaving it soaking for too long “can result in mold or bacteria growing inside the board.”
    • Try to quickly wipe down the board if you cut anything on it that holds a lot of moisture, like fruit. [12]
    • Additionally, avoid using your cutting board when it’s wet. The wood will be softer, which means it will be easier to leave knife marks in the board. [13]
  2. Pour a thin layer of food-grade mineral oil onto the cutting board, then rub it into the top, bottom, and sides with a paper towel. Let that soak into the wood for a few minutes, then repeat the process until the oil doesn’t seem to be sinking into the wood anymore. Wipe away any excess and let the board dry overnight. [14]
    • According to Miller, you can add a little salt to the board when you’re oiling it to improve the seasoning.
    • Sprinkle a few drops of water on the cutting board. If they spread out and start to sink into the wood, the board needs to be oiled.
    • Oil the cutting board as soon as you get it unless it comes pre-oiled. After that, you’ll usually need to oil your cutting board about once a month—but it depends on how often you use it. [15]
  3. After you’ve let the oil soak into the wood, rub board cream or 100% beeswax over every side of the cutting board. Let that soak into the wood overnight, then use a paper towel or clean cloth to wipe away any excess the next day. [16]
    • You can purchase pre-made board cream or make your own.
    • To make your own board cream, mix 1 2   tsp (2.5 mL) of beeswax with 1 cup (240 mL) of food-grade mineral oil. Microwave the mixture for 30–45 seconds. It will be easiest to spread over the board if you use it while it’s warm.
  4. You may be able to remove knife marks by sanding the wood. Start by cleaning and sanitizing the board, then buff out any scratches with 220- or 400-grit sandpaper. When you’re finished, wipe the board clean with a damp cloth or sponge, then allow it to air dry. [17]
    • Oil the wood after you sand it to restore the seasoning.
  5. Over time, your knives may leave behind scratches or grooves in the wood. These can harbor bacteria that can be difficult to remove, even if you wash or sanitize the board. To be safe, toss out the board or use it for cracks once it develops deep scratches that you can’t sand out. [18]
    • If the wood warps and cracks, you should also replace it for the same reason.
  6. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about cleaning, check out our in-depth interview with Raymond Chiu .

      About This Article

      Thanks to all authors for creating a page that has been read 639 times.

      Did this article help you?

      Advertisement