PDF download Download Article PDF download Download Article

If you have an old vinyl record that's unplayable or scratched, upcycle it instead of throwing it away. You can make art, designs, jewelry, and much more by cutting the record. By heating records or using a hotknife, you can easily cut vinyl records into whatever shape you need without breaking them!

Method 1
Method 1 of 3:

Heating Vinyl Records in the Oven

PDF download Download Article
  1. Put one of the racks in the center position. Turn on the oven and let it heat completely. [1]
    • If you want to make a specific design, draw it on the record with a pencil before you heat it.
  2. Set the record on the center rack. It can go directly into the oven or onto a baking tray. Turn on the oven’s interior light if it has one so you can watch the vinyl heat. Use oven mitts to take the vinyl out of the oven before it starts to droop or melt. [2]
    • The heat softens the vinyl, making it easier to cut.
    • Leave your oven on until you’re completely finished with your cuts in case you need to reheat your vinyl.
    • Cover a baking tray with aluminum foil before putting the vinyl record on it. This protects the baking tray from any melted vinyl.
    Advertisement
  3. Watermark wikiHow to Cut Vinyl Records
    Set the vinyl on a flat heat-safe cutting surface. Hold the record still with an oven mitt or potholder so it doesn’t move around when you cut it. Follow along with your design with a sharp knife or pair of scissors. [3]
    • Make sure you use a sharp blade to make your cuts.
  4. As you work with the vinyl, it will start to solidify as it loses temperature. Set the record back on the center rack of your oven for 1-2 minutes to soften it to a workable temperature again. Repeat this as many times as you need until you’ve finished cutting your vinyl record. [4]
    • Turn off your oven when you make your last cuts.
  5. Watermark wikiHow to Cut Vinyl Records
    Use a 120 to 300-grit sandpaper to finish the edges where you made your cuts. This ensures they aren’t jagged or sharp so you can easily handle the record afterward. [5]
  6. Advertisement
Method 2
Method 2 of 3:

Using a Hotknife to Cut Vinyl Records

PDF download Download Article
  1. Hot knives are heated cutting tools used in crafts and woodworking to precisely cut delicate materials like vinyl or foam. Visit your local crafts store and look for a hot knife with a sharp blade attachment. [6]
    • Check a home improvement store if an arts and crafts store doesn’t carry hot knives.
  2. Turn on the knife and set it so the blade is off of your work surface. Wait 2-3 minutes for the blade to heat up or else your knife won’t make smooth cuts. Do not touch the blade of the knife once it’s heated. [7]
    • Work on a wooden or heat-resistant surface so your knife doesn’t burn through it when you make your cuts.
    • Keep the knife out of children’s reach.
    • Many hot knives will have a built-in stand to hold the blade off the table.
  3. Watermark wikiHow to Cut Vinyl Records
    Slowly stab the tip of the hot knife through the vinyl record. Once you’re through the vinyl, pull the knife at a steady speed along the line you want to cut. Follow all of your lines until you’ve completely cut out your design. Turn off the knife and let it cool down once you finish. [8]
    • Vinyl contains chlorine gas that could escape when it’s heated. Wear a facemask while cutting the vinyl with a hotknife.
    • Don’t hold the knife in one spot for too long or else the vinyl will melt and bubble.
    • Keep the knife stationary and move the record with your other hand if that’s more comfortable.
  4. Watermark wikiHow to Cut Vinyl Records
    Hold the cutout portion of vinyl against the table with your non-dominant hand. Start gently pulling the rest of the record off your work surface with your dominant hand to separate the pieces. [9]
    • For more intricate pieces, hold the cutouts as close to the edge as possible so they don’t break off when you try to separate the pieces.
  5. Advertisement
Method 3
Method 3 of 3:

Making Crafts with Vinyl Records

PDF download Download Article
  1. Watermark wikiHow to Cut Vinyl Records
    Heat the record in the oven at 250 °F (121 °C) for 3 minutes. Once the oven is heated, use a pair of scissors to cut out the label in the center. Once you have the record down to size, trace it onto a piece of felt and cut it out. Attach the felt to the bottom of the record label with spray adhesive. [10]
    • Make sure to cover the hole in the center of the record, or else the liquid could still damage your table.
  2. Draw a design on the record using a number 2 pencil before you start cutting it. Cut your design out of the vinyl using either a hot knife or utility knife. Hang the record on your wall either using adhesive strips or with a nail through the center hole. [11]
    • To get inspiration for your art, look at the name of the record and think of a theme that relates to the song or album title.
  3. Cut out 3 by 8 inches (7.6 cm × 20.3 cm) strips out of the record and put them on a baking tray. Place the tray in an oven heated to 200 °F (93 °C) for about 3-4 minutes. Once you remove the baking sheet, shape the vinyl strip to fit around your wrist by wrapping it around a rolling pin.
    • If you need to reshape or resize the vinyl, put it back in the oven for 1 minute to soften it again.
  4. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      • Vinyl releases chlorine gas when heated. Wear a facemask so you don’t inhale any of the fumes.
      Advertisement

      Things You’ll Need

      Heating the Record in the Oven

      • Oven
      • Utility knife
      • Heavy-duty scissors
      • Sandpaper
      • Baking sheet (optional)

      Using a Hotknife

      • Hotknife
      • Wooden work surface
      • Facemask

      Making Crafts

      • Oven
      • Scissors
      • Felt
      • Pencil
      • Hotknife
      • Rolling pin
      • Baking sheet

      About This Article

      Thanks to all authors for creating a page that has been read 86,525 times.

      Did this article help you?

      Advertisement