Download Article
Download Article
Labyrinth designs are fun and can be used as puzzles, logos, and decorative art, just to name a few. This article explains the process of drawing a labyrinth; as long as you're patient, it's actually very easy to do.
Steps
-
Draw a cross. Add dots on all four corners of an imaginary square.
-
Connect the upper tip of the vertical line with the upper right dot using a curved line.Advertisement
-
Using another curved line, connect the right tip of the horizontal line with the upper left dot.
-
Connect the left tip of the horizontal line to the lower right dot using a bigger curved line.
-
Elongate the vertical line on the bottom and connect its tip on the lower left dot.
Advertisement
-
Draw eight concentric circles , leaving a small circle that will serve as the labyrinth's center. (Concentric circles sit one inside the other, like a target in a game of darts.)
- To make things as easy as possible, label the circles from 1-8, starting with the largest circle as number 1. (There will be references to numbered circles later in the instructions, so even if you decide not to physically label your circles, at least know which would be 1, which would be 2, etc.)
-
At the labyrinth's center, draw a flower-like pattern. This is the center of most labyrinths.
- Your flower should be perfectly symmetrical--i.e., drawing a straight line through its center in any direction should yield two identical halves. If this is not the case initially, try to redo your flower so that it is.
-
Draw two horizontal lines and four vertical lines across the labyrinth, taking care to avoid drawing through the center. The lines should align with the middle of the labyrinth. The lines should be spaced evenly apart.
-
Erase lines to make labyrinth pathways. Starting with the left horizontal line, erase lines in circles 1, 2, 5, 6 and 7. Erase a part of circle 4, as shown here.
- When erasing, remember to make the pathway's size equal to the size of the spaces within circles.
-
Erase the vertical line in the first circle, and leave the rest of them untouched. Erase parts of circles 3, 5, and 7.
-
Erase the horizontal line in circle 7, but leave the rest of them untouched. Erase parts of circles 2, 4, and 6.
-
Erase the first vertical line from the left within circles 3, 4, and 7. Leave the second vertical line untouched. Erase the third vertical line from the left within circle 7, leaving the rest untouched.
-
Continue to erase lines within each circle to complete the pathways.
- For circle 1, erase the part between the first and second vertical lines.
- For circles 2 and 6, erase the part between the first and third vertical lines, as well as some from the left.
- For circles 3, 5, and 7, erase the part between the first and third vertical line, as well as some from the right.
- For circle 4, erase the part between the second and third vertical line.
- For circle 8, erase the part between the second and third vertical line.
Advertisement
Community Q&A
Search
-
QuestionHow should a labyrinth be colored?Community AnswerBrown, grey, and black are realistic colors to use.
-
QuestionHow do I know where the beginning of the labyrinth is? Is there a set way to walk it?Community AnswerThere is not a right or wrong way to draw a labyrinth. All a labyrinth is is a maze. To find where a labyrinth starts is to look on the perimeter of the labyrinth for a way out or opening. There is no set way to walk it unless you are trying to escape it.
-
QuestionHow can I make one using small pebbles?Community AnswerLine the pebbles up to make the walls of the labyrinth.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- These instructions work for both paper drawing and screen drawing. Try both to see which effect you like the most.Thanks
- Have patience. Labyrinths are meant to test it!Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
About This Article
Article Summary
X
Drawing a labyrinth is a fun way to make a puzzle maze or simply a decorative piece of art. Start by drawing 8 circles that sit inside one another, like a dartboard. At the labyrinth’s center, draw the outline of a flower. Then, draw some lines extending from the edge of the flower to the outermost circle. There should be 1 line going horizontally to the left, 1 going horizontally to the right, 1 going vertically to the top, and 3 lines going vertically to the bottom. After you’ve drawn these, erase parts of each line to make pathways for your labyrinth. To learn how to draw a simple labyrinth, read on!
Did this summary help you?
Thanks to all authors for creating a page that has been read 164,431 times.
Advertisement
80%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
