How to Fix or Replace a Toilet Flapper

PDF download Download Article
A simple how-to guide on resolving toilet tank issues
PDF download Download Article

If your toilet constantly runs or flushes poorly, you may have narrowed the problem down to the flapper. You’ve done good detective work, since a bad flapper is almost always to blame for toilet issues with water running. To fix the problem, you may need to adjust the chain to change the height of the flapper. If that doesn’t work, the flapper likely needs to be replaced. In this article, we’ll show you how to do both.

Things You Should Know

  • If the flapper won’t close or it’s not opening all the way, change the length of the chain connecting the flapper to the rod.
  • Replace the flapper if the chain isn’t to blame. Purchase an identical model and install it the same way your old flapper was installed.
  • You do not need any tools or fancy gear to replace a flapper, but you do need an identical replacement.
Method 1
Method 1 of 2:

Adjusting the Flapper Chain

PDF download Download Article
  1. Grab the lid from both sides and set it aside. Take a minute to study the components in your tank. The flushing handle should be connected to a long metal or plastic handle arm called a float arm . This connects to the flapper chain . In turn, the chain connects to the flapper , which is the piece that plugs the drain when you flush. [1]
    • The two vertical pipes are the overflow tube , which automatically drains excess water to prevent flooding, and the fill valve (to the left or right of the overflow tube), which fills the tank.
    • You may have a float ball that automatically shuts the fill valve off when the water reaches a certain height. On newer toilets, you just bend the float arm to adjust the water level.
  2. Reach into the tank and remove the chain link that connects the handle arm to the flapper. Find the small opening in the link that lets you remove it, and slide it off. [2]
    • Don't worry about emptying your toilet tank to tighten the flapper. It’s actually easier to figure out where you need the chain to be if your tank is full, anyway.
    • The water in the tank is clean, so don’t worry about your hands getting wet. You can wear gloves if it makes you feel better, though.
    • If the chain is broken, you might as well just replace the flapper. They come with chains, and flappers are cheap enough that you might as well replace it.
      • You can replace the chain if you want, but if the chain broke it’s a sign the flapper is old.
    Advertisement
  3. Your goal here is to make the chain sag a little bit when the flapper is closed, but pulled taut when the handle is pressed so that the flapper opens up. Play with the chain and the handle to find that sweet spot. You normally need about 1 ⁄ 2  in (1.3 cm) of slack in the chain. [3]
    • If the chain is too long, it won’t pull the flapper up to drain the toilet when you press the handle.
    • If the chain is too short, the flapper won’t be able to close and water will constantly run in your tank.
  4. Slide that perfect link over the hook on the handle to attach it to the float arm. You can leave the extra chain dangling in the water, or clip the excess off using some wire cutters. [4]
    • If it is 100% impossible to re-hook the chain because it doesn’t have openings on the links, you can use a paperclip to hook the chain to the float arm.
  5. Press down on the toilet handle and make sure that the chain is tight enough. The chain should bring the flapper high enough to stay open while the toilet flushes. If it doesn't, continue adjusting the paperclip location until the chain tightness is ideal. [5]
    • If the chain isn't tight enough and the flapper doesn't go all the way up, move to a chain link closer to the flapper valve.
    • If the chain is too loose and the flapper doesn't completely seal the hole, move to a chain link closer to the toilet handle.
    6. Advertisement
Method 2
Method 2 of 2:

Replacing the Flapper

PDF download Download Article
  1. Remove the tank lid and set it aside. Turn the shut-off valve clockwise as far as it will go to cut the water supply off. Then, flush the toilet to drain the water in the tank out. [6]
    • The shut-off valve is typically located behind and underneath the toilet. It’s usually on the same side as the handle.
    • You may be tempted to replace the ring around the opening under the flapper. Don’t; the problem is almost positively the flapper itself. Flappers fail all the time—it’s the part that gets the most wear and tear—and replacing the flapper will almost positively solve the problem. [7]
  2. Start by removing the chain from the old flapper (keep it on the handle, though). Then, pull the flapper off of the overflow tube. If it’s wrapped around the overflow tube, slide the flapper up to remove it. [8]
    • If your chain is broken, just use the chain that came with your new flapper.
  3. Take the old flapper with you to the hardware store and find a replacement. It doesn’t need to be the same brand, but it does need to be the same style. [9] You may have:
  4. Attach the new flapper to the flush valve the same way that you removed the old one but in reverse. It’s normally as simple as sliding it over the opening or inserting the arms into divots in the overflow tube. Afterward, connect the chain to the top of the flapper and connect the remaining end to the float arm. [10]
    • If you have to connect a ball for your ball flapper, attach it to the end of the fill valve. Some modern ball flappers just float in the tank, though.
  5. With the flapper installed, turn the water back on. Wait for the tank to fill and then test the handle by flushing the toilet. If the flapper works as intended, the tank will drain and refill. Once the flapper closes, it shouldn’t let any more water through. [11]
    • If the flapper won’t open when you press the handle, the chain is too long. Attach the arm to a lower link on the chain.
    • If the flapper won’t lower, the chain is too tight. Use a link slightly higher up on the chain.
    • If the flapper won’t close all the way, wipe the rough edges around the lip of the flapper valve—located underneath the flapper—with an emery cloth. This will help it create a watertight seal.
    6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    The flapper on my toilet wither closes too soon or does not close at all, depending on how much I tighten the lock nut on the flush handle. There is no float on the style I have. I have tried replacing the flush handle, but it acts the same way. What am I doing wrong?
    Community Answer
    In the case where the flapper closes too quickly, get one that has more buoyancy, such as the Hornet V (buy online) or a universal one by Korky (at Home Depot, Lowe's, etc.). These two tend to float on top of the water as it drains downward. Avoid flappers that have a small round hole in the front of the flapper cone, as the hole reduces buoyancy.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 22
  • Question
    How do I unkink a lift chain?
    Community Answer
    Get a plastic straw cut length wise about 2/3 the length of the chain and wrap it around the chain.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 10 Helpful 22
  • Question
    What if the flapper closes before enough water flushes from the tank?
    Community Answer
    If the flapper chain has a float on it, lower the float closer to the flapper. It can slide down the chain and then lock in place. When the float is lower it is buoyed up by the water longer and holds the flapper up longer. If you have the float placed too high, it is pulled out of the water quickly when you flush and doesn't provide the buoyant counter force for a long enough time.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 17 Helpful 25
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Adjust Toilet Tank Handles
      How to
      Quickly and Easily Unclog a Toilet
      How to
      Fix a Running Toilet: Your Ultimate Guide
      How to
      Shut Off Your Toilet’s Water Supply
      How to
      Fix a Toilet Tank Leak
      How to
      Remove and Replace a Toilet Tank
      How to
      Reseal a Toilet: Replacing Wax Seals
      How to
      Fix a Toilet That Bubbles and Gurgles When Flushed
      How to
      Fix an Overflowing Toilet: Expert-Approved Tips
      How to
      Fix a Loose Toilet Seat
      How to
      Unclog a Toilet with Baking Soda
      How to
      Fix a Stuck Toilet Handle
      How to
      Fix a Slow Toilet
      How to
      Unclog a Toilet Without a Plunger
      Advertisement

      References

      1. ↑ https://www.familyhandyman.com/plumbing/toilet-repair/parts-of-a-toilet/view-all/
      2. ↑ Patrick Johns. Home Improvement Specialist. Expert Interview. 5 April 2022.
      3. ↑ https://www.youtube.com/watch?v=SGdDLHbP-l0
      4. ↑ https://www.youtube.com/watch?v=SGdDLHbP-l0
      5. ↑ Patrick Johns. Home Improvement Specialist. Expert Interview. 5 April 2022.
      6. ↑ https://www.youtube.com/watch?v=SGdDLHbP-l0
      7. ↑ https://www.youtube.com/watch?v=SGdDLHbP-l0
      8. ↑ Patrick Johns. Home Improvement Specialist. Expert Interview. 5 April 2022.
      9. ↑ Patrick Johns. Home Improvement Specialist. Expert Interview. 5 April 2022.
      1. ↑ Patrick Johns. Home Improvement Specialist. Expert Interview. 5 April 2022.
      2. ↑ https://www.youtube.com/watch?v=SGdDLHbP-l0

      About This Article

      Article Summary X

      To fix a flapper on a toilet, take the lid off the toilet tank and remove the chain link that connects the handle arm to the flapper. Next, straighten out a paper clip and bend it into a circle with a small opening in it. Then, hook the circle into the end of the handle arm, attach a link on the chain to the paper clip, and squeeze the sides of the paper clip to tighten it. Finally, press down on the toilet handle to check how it's flushing and adjust the paper clip location as needed until you achieve the right tightness. For tips on replacing a broken or worn-out flapper, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 630,220 times.

      Reader Success Stories

      • Marsha Ronald

        May 17, 2016

        "The pictures illustrating the steps were fantastic, and the step-by-step instructions were perfect. I could ..." more
      More reader stories Hide reader stories
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement