Download Article
Download Article
Plantation shutters have become very popular due to their easy use, attractive look, and effective protection against the elements. If you're planning on purchasing plantation shutters, you're hopefully excited about giving your home a new look with an easy installation process. By doing things such as collecting the right tools, making sure your frame is even, and aligning the shutter panels with the frame, you'll have installed your own plantation shutters in no time at all.
Steps
-
Put the frame together. Each shutter frame should come in four pieces. To put them together, use the plastic connectors which should have come with the shutters and gently tap the connector into the coinciding slit in the frame pieces using a rubber mallet. [1] X Research source
- Make sure your frame is even - the left and right sides should be connected to the top and bottom sides. Pieces should most likely be labeled, making this easy.
- Tap the sides into each connector piece until they are flush against each other.
-
Know whether you're installing an interior or exterior mount. If you're installing your shutters to the interior of your window frame, make sure the window is square and that there aren't any latches, handles, or other things that would get in the way. If you're installing your shutters to the exterior of your window, you'll be attaching the frame directly to the wall.
- Whether you choose an interior mount or exterior mount will change your necessary measurements, so check your plantation shutter instruction manual to make sure you're doing the right one.
- An exterior installation works better for bay windows as it provides more mobility.
Advertisement -
Attach the top of the shutter frame to the window using screws. Pick up the frame and place it in your window. If it fits nicely, attach the frame to the window by inserting two screws at the top of the frame using a drill. If your frame has predrilled holes, you can insert the screws into those, but make sure you only attach the top ones. The bottom of the frame should still be able to move freely. [2] X Research source
- It's helpful to have a second person hold the frame to the window while you insert the screws, or vice versa.
- If your frame isn't fitting, it either means the frame wasn't put together properly or your initial measurements are wrong. Make sure the frame pieces are connected and even. If you think you might have sent in the wrong measurements, call the shutter company and ask for advice.
-
Use a level to make sure the frame sections are even. Use a level to check that each side of your shutter frame is even. For an easy installation of the shutter panels, you want to make sure your frame is level before moving on.
Advertisement
-
Know which panel corresponds to which frame. If you’re installing multiple plantation shutters, find out which panel goes with its corresponding frame. All of your pieces should be labeled, making this very easy to do.
- To avoid getting confused, you can lay out each frame and panel that go together beforehand.
- If there are any labels on the frame or panels, keep them on until you've finished installing the shutters entirely.
-
Use hinge pins to install the panel. Lift the panel up to its frame and use hinge pins, which should be part of the hardware that comes with the shutters, to attach the panel to the frame. Drop a pin into each hinge to join them together. [3] X Research source
- If you’re having trouble getting the pins to fit into the hinges, you can loosen the screws from a hinge, move it a little until the pin drops in, and then reattach the screws.
-
Adjust the panels and frame until they align well. Open and close the panel door to make sure that it lines up with the frame. The frame should still have mobility at the bottom, so move the frame from side to side until it lines up with the panel. There shouldn’t be any large gaps or uneven sides. You can use the level again to make sure everything is straight as well. [4] X Research source
-
Insert the remaining screws into the bottom of the frame. Once your panel and frame are aligned, you can attach the frame securely by inserting the bottom screws and any other remaining screws. Drill the screws in carefully, checking each time that the panel and frame are still aligned and straight. [5] X Research source
-
Cover the frame holes if necessary. Many plantation shutters come with small caps that you can fill your drill holes in with. Cover each hole in the frame with these caps if desired, but not covering the holes will not impact your shutters. [6] X Research source
Advertisement
Expert Q&A
Search
-
QuestionHow are shutters attached to brick?Melissa and Michael Gabso are the Owners of MC Construction & Decks based in Los Angeles, California. With over ten years of experience, they specialize in exterior and interior remodeling and redesign, including kitchen, bathroom, and deck construction. MC Construction & Decks also provides plans and permitting services and is known for backyard beautification projects. MG Construction & Decks has been rated as one of the top contractors in the Los Angeles area year after year.Use screws and plugs to attach your shutters to the exterior brick of your home.
-
QuestionHow much does it cost to install plantation shutters?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerPlantation shutters are sturdy and strong and therefore they are not cheap. However, they are long-lasting, so the cost is worth it. While it pays to shop around, if you're doing a whole house, it'll probably cost between $1500 to $4000 to put shutters on each window. The cost variation depends on window sizes, amount of windows and whether or not you use wood or composite shutters, the latter being about half the cost of wood shutters. It is recommended that you get a shutter specialist to come to your home and quote the prices so you can decide what fits your budget best.
-
QuestionHow long does it take to install plantation shutters?This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerMost of the time taken to install the shutters is lead time; planning, choosing and ordering, which can take up to 2 to 3 months, depending on where you are. If they need to be build abroad (such as in Asia), expect more delays. Once the shutters are selected and are either in stock or built to the specifications of your windows, they should only take a day to fit after delivery.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- If your plantation shutter has a magnetic strip on it, check to make sure that it clicks and aligns well with the frame.Thanks
- If screws and hinges do not come with your plantation shutters, they can be found at most hardware stores or online.Thanks
- Unpack the shutters in a carpeted area to avoid scratching any of the pieces. If you don’t have a carpeted area, you can lay down a blanket or towel to use as a soft surface, or even undo the boxes that they came in and use those.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Things You'll Need
- Hammer or rubber mallet
- Drill
- Level
- Hardware (if not included with shutters)
- Wall fixings (if installing into a brick or block wall)
References
- ↑ https://foxhollowcottage.com/easy-diy-plantation-shutter-installation.html
- ↑ https://www.blinds.com/blog/tips-for-installing-plantation-shutters-even-in-non-square-windows/
- ↑ https://www.blinds.com/blog/tips-for-installing-plantation-shutters-even-in-non-square-windows/
- ↑ https://www.blinds.com/blog/tips-for-installing-plantation-shutters-even-in-non-square-windows/
- ↑ https://justagirlandherblog.com/how-to-measure-for-and-install-plantation-shutters/
- ↑ https://www.theshutterstore.com/files/diy-guides/installation-guides/install_om_fullheight_shutters_2014_uk
About This Article
Thanks to all authors for creating a page that has been read 36,665 times.
Advertisement
86%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
