How to Sew a Fitted Sheet for Beginners

Follow these easy sewing tips to create perfectly fitted sheets

Co-authored by Mason Martinez, BA

Last Updated: December 29, 2023 Fact Checked

You can make bedding yourself by sewing fitted sheets. While making flat sheets and pillowcases involves sewing in a straight line, a homemade fitted sheet can be a little trickier—but you can learn how to make a fitted sheet yourself, even if you're a beginning sewer. For a simple walk-through of this process, read on!

1

Measure your mattress.

Download Article

Measure the width, depth, and length of your mattress. This will help you determine how much fabric you should purchase or cut to size. If you don’t want to buy new material, take a larger flat sheet you already own. So, if you’re making a twin-sized fitted sheet, use a queen or king-sized flat sheet. You’ll only need to measure the depth of your mattress using this method. ^{[1]
X
Research source}
- You can use an online bed size chart, but be careful. Each mattress may have a different depth. Measure yours to ensure your fabric will fit.
- Twin-sized sheets: 35 in (W) x 75 in (L)
- Full-sized sheets: 53 in (W) x 75 in (L)
- Queen-sized sheets: 59 in (W) x 79 in (L)
- King-sized sheets: 71 in (W) x 79 in (L) ^{[2]
  X
  Research source}

2

Cut fabric to size.

Download Article

Cut a piece of fabric based on your measurements. Use the formula to cut your fabric to size: Mattress Width + (2 x Mattress Depth) + 16 in and Mattress Length + (2 x depth) + 16 in (40 cm). The additional 16 in (40 cm) will be used for seam allowance and tuck-in, 8 in (20 cm) on each side.
- An average twin-sized mattress would be 38 in + (2 x 8) + 16 in and 75 in + (2 x 8) + 16 in.
- If you want to make the process of sewing fitted sheets even simpler, use a flat sheet instead of a large piece of fabric to sew the sheet. If you do this, it may help to level one side of the sheet to the bottom edge of the mattress. This way, you’ll only have to cut two sides of the sheet instead of all four. ^{[3]
  X
  Research source}

3

Prepare your corner markings.

Download Article

Use your tape measure to measure from the corner of the fabric. Along the mattress’s outer edge, measure over the mattress’s depth and add 8 in (20 cm) from the corner of the fabric. Using a pen or fabric marker, mark this spot.
- Measure up the depth of the mattress plus 8 in (20 cm) from the marked spot. Put a dot at the spot.
- Draw a line connecting that dot to the mark on the edge of the sheet. Draw another line connecting the dot to the edge of the fabric on the other side.
- This will give you a square shape on the corner of your fabric.

4

Cut out the square.

Download Article

Don’t toss the extra fabric away. Instead, use it as a template for the other 4 corners of your fabric or flat sheet. Doing this to the corners will help ensure the sheet hugs your mattress. ^{[4]
X
Research source}

5

Fold the fabric.

Download Article

The right sides of the homemade fitted sheets should face each other, leaving the unfinished side facing you. Be sure the edges line up because you’ll be sewing these together momentarily. ^{[5]
X
Research source}

6

Secure the corners.

Download Article

Pin the cut edges together at each corner. This will help keep the edges aligned and in place while you sew them together. ^{[6]
X
Research source}
- You can also use sewing clips to keep them in place.

7

Sew the corners together.

Download Article

When you start, sew a few stitches down before performing a back-stitch. This will ensure your stitches are secure. Continue along the edge until you reach the bottom. Secure with another back-stitch and clip your thread. ^{[7]
X
Research source}

8

Sew along all 4 edges.

Download Article

Sew each edge of your sheet by folding the hems over 1/2 inch (1 cm). You can secure your edges with pins or sewing clips. ^{[8]
X
Research source}
- You can skip this step if you are using a flat sheet since the edges are already properly hemmed.

9

Fold the hems.

Download Article

This will give your fitted sheets a finished look while also creating a casing for elastic that you’ll add in a later step. ^{[9]
X
Research source}

10

Create a casing.

Download Article

Leave 1-inch (2.5 cm) wide gaps along the hems. Typically, you’ll want to leave this gap about 8 in (20 cm) away from the sewn-together corners on each side of the sheet. In this gap, you’ll be able to thread elastic through to make the fitted sheet snug. ^{[10]
X
Research source}
- You can also create a casing that goes the entire length of your project. If using this method, you’ll need more elastic.

11

Cut your elastic to size.

Download Article

Cut 4 pieces of elastic that measure 16 in (40 cm) long. The elastic is used to cinch the corners of your fitted sheet to your mattress. Suppose you want elastic to run along the edges of your sheet. In that case, you’ll need to calculate the perimeter of your sheet by adding the Width + Length = Amount x 2 = Perimeter.
- For example, a twin-sized mattress would look like 38 in + 75 in = 113 x 2 = 226.
- Generally, you want to use ⅔ of elastic for your distance. ^{[11]
  X
  Research source}
- To calculate this, multiply 2 x Perimeter. Then divide your answer by 3. For instance, 2 x 226 = 452 / 3 = 150.6 inches (382.5 cm) of elastic. ^{[12]
  X
  Research source}

12

Pull your elastic through.

Download Article

Thread 1 piece of elastic through the hem in 1 corner of the sheet. Pin 1 end of the elastic using a safety pin to the gap on 1 side.
- Attach a safety pin to the end of the elastic to help you push it through the hemmed edge of the sheet. ^{[13]
  X
  Research source}
- Pull the elastic so the sheet corners gather around it.
- Pin the other end of the elastic to the sheet on the other end.

13

Sew the elastic in place.

Download Article

Keep the elastic in place by sewing both sides of the corner. Use a zig-zag stitch; this allows the elastic to stretch with the thread. ^{[14]
X
Research source}
- If you use a normal straight stitch, the thread will snap when the elastic stretches.

14

Finish all 3 corners.

Download Article

Thread the elastic through the remaining 3 corners and sew each in place. Once you do, you’ll have a brand-new fitted sheet!

Community Q&A

Search

Add New Question

Question

I'm trying to make a bassinet fitted sheet. It's 19 1/2" wide, and 1" high and 33" long with rounded corners. How do I modify the measurements of the fabric and fitted corners to accommodate this bassinet?

Community Answer

Most beds have rounded corners. When you insert the elastic, it will make the corners fit a rounded or square corner.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 10 Helpful 27
Question

How do I make a king size fitted sheet?

Community Answer

The same as shown above. Because you are measuring the bed, it doesn't make any difference if it's a queen, twin, double or king bed. The measurements are what you go by.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 29
Question

I'm making a bassinet fitted sheet and the mattress is only like 1.5" thick. Do I still add the additional 16 inches?

Community Answer

You will probably only need 8 or 10 inches. With such a thin mattress, you won't need as much fabric.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 10

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Things You'll Need

Tape measure
Fabric or flat sheet
Scissors
Fabric marker or pen
Straight pins or sewing clips
Sewing machine and thread
Safety pin
.25-inch (.64 cm) wide elastic

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

Log in

How to Sew a Fitted Sheet for Beginners

Steps

Measure your mattress.

Cut fabric to size.

Prepare your corner markings.

Cut out the square.

Fold the fabric.

Secure the corners.

Sew the corners together.

Sew along all 4 edges.

Fold the hems.

Create a casing.

Cut your elastic to size.

Pull your elastic through.

Sew the elastic in place.

Finish all 3 corners.

Community Q&A

Video

Tips

Things You'll Need

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Explore Categories