Download Article
Map out a flawless look for your lashes with these easy instructions
Download Article

Applying lash extensions takes a lot of time and practice. It requires more than just a steady hand, however. Applying the same lash length all along the lash strip may result in an unnatural look, but you can't just apply different lengths randomly. Eyelash mapping allows you to determine what length of extension you should use on which part of the lash line. The process in itself is simple, but you may need some practice before knowing what your client needs becomes instinct.

Part 1
Part 1 of 3:

Learning to Map

Download Article
  1. Have your client lay down and close their eyes. Place the pad right under their eyes, in the lower lash area.
    • If you are not confident in your abilities, use a mannequin head instead; make sure that it has lashes.
    • You can also place the pad down onto a strip of paper or even a plastic mask.
  2. If you can't find a red pen, try another unnatural color, such as bright blue, pink, green, or even purple. Do not use black, as the client's lashes will get lost in them. [1]
    Advertisement
  3. Try to match these lines to the angles of the client's lashes. If you are practicing on a piece of paper, draw a faux lash line first. The length of the lines does not matter, as long as it is longer than the client's lashes. [2]
    • These are your frame. You will be creating the map within these 2 lines.
    • Press lightly, especially if you are working on a client.
  4. Find the center of the client's lash line. Draw a vertical line going from that point towards the edge of the pad. Again, the length of the line does not matter. One side of the line will be referred to as the "inner eye," and the other side of the line will be the "outer eye." [3]
  5. Plan on having 3 segments towards the inner eye, and 4 segments towards the outer eye. Keep these lines straight and angled; they need to match the natural angle of the client's lashes. Play around with different widths. [4]
    • Put the widest segment in the middle.
    • Put the narrowest segments in the outer eye area.
    • Keep the medium segments in the inner eye area.
  6. Write the numbers right inside each segment, starting from the inner corner and finishing at the outer. Match the first and last segments to the person's natural lashes, then increase the numbers by increments of 1 as you go towards the middle. When you reach the middle, decrease them by 1.
    • Your lash sample might look like this: 8, 9, 10, 11, 11, 10, and 9.
    • Another example might look like this: 8, 9, 10, 11, 10, 9, and 8. [5]
  7. Advertisement
Part 2
Part 2 of 3:

Refining the Look

Download Article
  1. There is no one-size-fits-all when it comes to lashes. Most close-set eye shapes will benefit from a cat-eye effect, meaning the lashes get longer toward the outer corner. Wide-set eyes will look better with a doll-eye effect in which the lashes are long in the center and are feathery rather than dense. There are always exceptions, however, and you should also take into consideration what the client wants.
  2. There is no one-size-fits-all when it comes to lash designs. Even though most designs will be longer in the middle segments, sometimes, you will have to make them longer in the outer segments to suit your client's unique eye shape. For example: [6]
    • Adding longer lashes to the outer corners will create a cat-eye effect and help widen close-set eyes.
    • Adding longer eyelashes in the middle will create a doll-eye effect and help close up wide-set eyes.
    • A combination of shorter lengths and a cat-eye effect will help round or protruding eyes appear less-prominent.
  3. Some clients will need equal-sized segments all along the lash strip. Other clients will look better if the segments vary in widths. For example, you could have narrow segments on the outer corners, medium segments on the inner, and wide segments in the middle.
  4. Instead of just numbering the segments, number the lines themselves as well. This way, you'll be adding a few longer lashes between each segment. For example, if your lash strip looks like: 8, 9, 10, 11, 10, you could put an 11, 12, 13, and 12 between each segment.
  5. The first and last set of lashes should be close to the client's natural lash length. Shorter lengths will make your client's lashes look fuller. For most people, 11 mm is the longest lash used, but some clients can use 12 and 13 mm lengths.
    • Only use 12 and 13 mm lashes if your client's natural lashes can handle the weight and if the look suits them.
  6. Advertisement
Part 3
Part 3 of 3:

Applying the Lashes

Download Article
  1. You can also have them sit in a recliner chair. Make sure that they are comfortable, however, and that their eyes are closed.
  2. Make sure that you are placing the left pad under the left eye, and the right pad under the right eye.
  3. Alternatively, you can buy a pre-printed map instead, but keep in mind that it may not suit your client. If the pre-made map doesn't fit your client, you may have to adjust it. [7]
  4. Fill up your first section , starting at the inner corner. For most people, this will be either 7 or 8 mm. It depends on the client and their unique eye shape and natural lash length. Do not apply any extensions to the first 2 lashes on the inner corner. These lashes are very delicate, and cannot handle the weight from extensions.
  5. If you started with 7 mm lashes, alternate between 7 and 8 mm lashes when transitioning to the longer section. This is known as gradating, and it will help create a smoother transition.Then, fill in the entire 8 mm section with the rest of your 8 mm lashes. [8]
  6. Always add a few lashes from the previous section into the beginning of the next section. You don't need to add the exact same number of lashes when you are gradating. If you have a very narrow section, you may only need a few lashes; if you have a wider section, then you will need more. [9]
    • If you don't gradate the lashes, you will end up with a jagged look.
  7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I get my lash extensions to last longer?
    Daniel Vann
    Licensed Aesthetician
    Daniel Vann is the Creative Director for Daredevil Cosmetics, a makeup studio in the Seattle Area. He has been working in the cosmetics industry for over 15 years and is currently a licensed aesthetician and makeup educator.
    Licensed Aesthetician
    Expert Answer
    You just have to be more gentle with the way that you wash your face and do eye makeup. You'll need to have a lot more care around that area. Think of having lash extensions like having acrylic nails: it's a lifestyle.
  • Question
    After 3 years of lashing, I have a client with really long lashes 10-12. If I go short 7-11, will it be ugly? She is blonde.
    Community Answer
    As a blonde myself, I wouldn't want super short lashes. But it depends on what your client wants, so you should ask for what she wants before you do anything.
Ask a Question
      Advertisement

      Tips

      • Lash mapping and lash application can take years to learn. Because each client is unique, you will need to practice a lot and learn from your mistakes. [10]
      • Lash mapping can be subjective; one person may think that the pattern looks great while another may say just the opposite. [11]
      • The customer is not always right, and the look that they want may not suit their eye shape and lash length. When this happens, you must compromise. [12]
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Lash gel pads
      • Red pen
      • Client or mannequin head with lashes

      About This Article

      Article Summary X

      Mapping your lash extensions will ensure that they’re the right length all along your eyelids. To get started, you’ll need gel pads made for eye lash mapping. Place the pads under your eyes and mark the edges and halfway points of your lashes with a brightly colored pen. Then, take the pad away and divide the map into smaller segments. Use 3 for your inner eye and 4 for your outer eye. Number the 7 segments based on the corresponding length of your lashes in millimeters. Then, place the pads underneath your eyelashes again and attach your extensions 1 section at a time. Start with your inner eye and work your way over to the outside. For more tips from our Beauty co-author, including how to map lash extensions for a customer, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 86,626 times.

      Reader Success Stories

      • L. Allen

        Aug 22, 2020

        "I learned more in this article than I learned in my lash class!"
      Share your story

      Did this article help you?

      Advertisement