Q&A for How to Paint Stainless Steel

Return to Full Article

Search
Add New Question
  • Question
    Can I apply varnish to painted surfaces?
    Beth H.
    Community Answer
    To apply varnish on top of paint, make sure the paint is dry. Use a paint brush to add one thin layer of varnish and let it dry. To add a second and third coat, let the varnish dry, sand the piece down with fine-grit sandpaper and add another thin coat of varnish.
  • Question
    Can l paint my stainless steel fire pit that has a few rust spots?
    Community Answer
    Sure. Just try to brush off the rust as much as possible with a wire brush first and make sure you use high heat rated paint.
  • Question
    My kettle has a rust spot inside. How can I get rid of it?
    Community Answer
    Use distilled vinegar mixed 50/50 with water and soak the rust area overnight or longer depending on the thickness of the rust. Use a stiff brush or steel scouring pad to remove the rust.
  • Question
    This shows a coffee pot and other small items. I am interested in knowing if I can paint a refrigerator, dishwasher, etc. I HATE my stainless steel appliances.
    Beth H.
    Community Answer
    Yes, you will need to make sure to purchase high temperature stainless steel paint. Liquid Stainless Steel is a brush on paint with larger flecks of stainless steel mixed in with a shinier finish. This process takes more time, but you will appreciate the finish.
  • Question
    Is there another quality brand that I can use instead of Bosny paint?
    Community Answer
    Yes of course, try Krylon or Rust-Oleum.
  • Question
    Were do I get primers and paint?
    Community Answer
    Craft, hardware, or department stores would carry the supplies you need. If you can't find them in your area, you can always order online.
  • Question
    Do I need a primer to paint stainless steel?
    Community Answer
    Yes. A primer will help the paint adhere to the surface, but the area must be sanded to give the paint and primer a place to hold on. You can use a self etching primer available in spray cans or, if painting a large area, an automotive epoxy primer. Check with an auto painter for advice.
  • Question
    Can I paint stainless steel shower bars?
    Community Answer
    Yes, you can, as shown in the illustrations above. Just follow the steps and go full steam ahead.
  • Question
    How can I paint stainless steel doors with powder clear coat?
    Community Answer
    The doors will have to be removed and taken to a shop that can powder coat.
  • Question
    I need to paint automobile stainless steel exhausts black, the powder coat peels due to the heat. Any other suggestions?
    Community Answer
    Use a high heat paint and primer. You should be able to find them at most hardware stores.
  • Question
    Can I paint a stainless steel sink and use it?
    Community Answer
    The challenge with painting a stainless steel sink is that if it is still used as a sink, water pressure may wear the paint off. You could try varnishing the paint well after, using a waterproof sealant and hope that works well. If the sink is to be used for something else though, like for storage, as a planter or other use, then painting it should be fine but still use a strong sealant to prevent paint chipping.
  • Question
    Is it possible to paint my stove white and have it hold up to the heat of cooking?
    Community Answer
    Yes, use a high heat paint that does not require curing. You may need a primer too, depending on what paint you buy. If you are using a gas stove you may get discolouration around the edges near the burners. I painted the top of my electric stove with black Stovebright. No scouring, no peeling, no problems ever.
  • Question
    Do I need to get rid of the original paint on my kettle before I spray paint it again?
    Community Answer
    If the paint is flaking or not currently sticking to the object, it would be best to get it off. Additionally, if there are areas without paint that make the surface uneven, removing the old paint or sanding the surface smooth would make the final product look better.
Ask a Question

      Return to Full Article