Download Article
Download Article
Tapping pine trees to capture the sap for use in paint products and in making pine resin products is almost a lost art. [1] X Research source Here are the basic steps if you would like to try this project for yourself. Because this project does inflict damage to the tree and expose it to dangers from pests and diseases, careful consideration should be given before proceeding.
Steps
Download Article
-
Locate some mature pine trees that you can obtain access to. You will need to have the landowner's permission before proceeding, and you must make it clear what you intend to do. Tapping the trees will not seriously injure them if done properly, but may decrease the value of them as timber if they are harvested in the future. [2] X Research source -
Identify the best species of pines for this purpose. Because in general, different species of pine have similar appearance, you may need to talk to someone familiar with the pines native to your area. Southern pines that are suitable for tapping include these:- Southern Yellow Pine
- Black Pine
- Loblolly Pine
- Improved Slash Pine
Advertisement -
Gather the necessary tools for your project. You will have to have a tool for cutting the bark of the tree, a catch pan, and a container to gather the collected sap into. If you choose to catch the sap in a plastic container, you will also need some lightweight sheet metal to form a funnel with to decrease waste of sap. Here is a basic list of tools and materials with a description of each one.- Hacker. This is a short, machete like tool for hacking the bark and sapwood of the tree. A special tool commonly made by local blacksmiths until early in the 20th century, you may substitute a hatchet or small axe or use a very sharp machete or other large knife.
- Turpentine pots. These pots were made of tinned steel or terra cotta ceramics, and are largely unavailable today. The two unique features they shared was a thin, curved rim at the top, and a hole for the hanging peg just below the rim on the concave edge. You can make your own turpentine pots from large metal cans such as institutional food containers. Simply remove the top completely, dent one side in to make it concave, and drill a 1 ⁄ 4 inch (0.6 cm) hole in the lip of the can.
- Lugging buckets. This is not a technical name, just a description of the use for the bucket the turpentine used to carry the sap from the collection pots to the still or the location the product was sold as a raw material.
- Hammer and pegs. Any hammer suitable for driving nails will work, and if you don't have hardwood pegs, you can also use a large nail to peg your collecting pots to the tree. The advantage of using hardwood pegs is that the tree could safely be harvested later for saw logs without the risk of a steel pin or nail damaging the sawmilling equipment.
- Turpentine still. Obviously this is a large and complicated assembly of equipment, and will not be discussed in detail here. Pine sap (called resin ) is gathered and distilled to produce turpentine , used for paint thinning, varnishes, and cleaning solvents.
-
Choose a tree to make your tap into. Look for large, tight-barked trees to have the best results, since shag barked trees will be difficult to get a tight fit on with your collecting buckets. -
Hack the bark away from the sap (live) wood about 3 foot (0.9 m) above the ground, and about 10 inches (25.4 cm) wide, by chopping the bark away with your machete, hatchet, or other chopping tool. Scrape away the bark to expose about a 6 inch (15.2 cm) tall section of sapwood. -
Fit your collecting bucket tightly to the sapwood, so that when the sap begins to seep out, it will drip into it. If you use a bucket that cannot be conformed to the shape of your tree, use a piece of metal flashing to form a funnel into the bucket. [3] X Research source -
Hack some shallow notches in a "V" shape, with the point of the "V" directly above the center of your bucket. -
Leave the bucket attached to the tree until the sap begins to seep out and drain into it. Rainwater will not affect the sap, since it is fairly waterproof, but you will want to collect the sap into a clean container with a tight-fitting lid every several days to keep debris from accumulating in it. Hack additional notches in the sapwood if the sap flow decreases, as the sap may begin to harden or crystallize, sealing the wood grain closed and preventing sap from seeping. [4] X Research source -
Remove any nails or other metal fasteners when you are finished your project and take down your collection pot. Driving a wooden peg into any penetrations may help prevent the tree from suffering further damage from insects or diseases entering through the hole.
Advertisement
Community Q&A
Search
-
QuestionWill the tree feel pain when I tap it?Community AnswerNot in the way that animals/humans do, because trees don't have a nervous system. However, it is not possible to rule it out completely. There's evidence that trees can respond to being damaged or eaten in various ways, and their methods of sensing these damages are not entirely understood.
-
QuestionHow is turpentine used to make colored paints?Mark O'GuinCommunity AnswerTurpentine is a solvent that emulsifies and acts as a carrier and thinner to aid in spreading the color pigments. Turpentine tends to keep colors truer and richer in oil-based paints than some other solvents.
-
QuestionCan pine resin be extracted from dry wood?Community AnswerYes, it can, I have collected dead fatwood (a location where the sap has collected), and it was dripping with sap once I removed the crystallized coat. But this was short-lasting. It is better for making pine tar.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- Although pines are evergreens , the sap runs faster in early spring or early fall, whenever you expect fairly warm weather. In very cold weather, the sap will be thickened by the low temperature and will hardly flow at all.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Pine sap contains turpentine, a natural solvent, which can cause irritation to the skin, eyes, or mucous membranes.Thanks
- Pine sap, turpentine, and other byproducts should be considered flammable.Thanks
Advertisement
Things You'll Need
- Buckets
- Hatchet or machete
- Hammer and nail
References
- ↑ https://sciencing.com/difference-between-tree-sap-tree-resin-12296179.html
- ↑ https://www.wildernessarena.com/supplies/misc-supplies/how-to-tap-a-pine-tree-for-pine-tree-sap
- ↑ http://tcpermaculture.com/site/2014/08/04/tapping-the-pine-tree-plant-resins-and-their-uses/
- ↑ https://www.youtube.com/watch?v=heR_4txbE9U
About This Article
Thanks to all authors for creating a page that has been read 218,833 times.
Reader Success Stories
- "It helped confirm the technique I already knew on how to tap a pine tree. I used a plastic bag rather than a bucket." ..." more
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"It helped confirm the technique I already knew on how to tap a pine tree. I used a plastic bag rather than a bucket."
..."
more
"This article really helped me! I need to learn by tomorrow!"
