How to Acid Wash a Swimming Pool

PDF download Download Article
PDF download Download Article

Whether your pool looks like a swamp, or you just want a fresh, clean-looking appearance, acid-washing your swimming pool can help. Also called "drain and clean," pools need this type of cleaning when winterizing the pool isn't done correctly, or algae has taken over due to the pool not being used or maintained in a while. The acid-wash process essentially strips the top layer of plaster to reveal fresh plaster beneath, so it's not recommended to do it often. But once in a while is a great idea!

Steps

PDF download Download Article
  1. As you drain, make sure to clean up any debris as you go. If your pool has an autofill, you should make sure that you turn it off during the drain. Once your pool is completely empty, start the acid-wash process. [1]
  2. [2]
    Advertisement
  3. Acid must be added to the water and not the other way around.
  4. The hose should not have a nozzle and water should be running from the hose at all times. [3]
  5. Pour the acid mixture on the wall from top to bottom in 10-foot (300 cm) sections at a time, leaving the acid on the plaster for about 30 seconds. During this time, you should be scrubbing the wall with a brush.
  6. [4] Before moving to the next section, make sure you rinse the wall well so the acid doesn't continue to eat the plaster.
  7. The acid-washing process leaves a foamy puddle of residue on the bottom of the pool that must be removed before it damages the plaster.
    • Apply soda ash to the acid puddle, scrubbing the mixture with a pool brush. You will need to use 2 lb. (.9 kg) of soda ash per 1 gallon (3.8 liters) of acid.
    • Pump the mixture into a bowl using a submersible pump.
    • Dispose of what you pumped, as the acid can kill frogs, fish and plants. Rinse out the bowl.
    • Pour water over any remaining residue, rinsing carefully around the drain.
    8. Advertisement

Video

Community Q&A

Search
Add New Question
  • Question
    I poured acid before disposing the water in the pool. What must I do now?
    Uthra Balakrishna
    Community Answer
    Quickly drain it off. The acid will be stuck on the walls. Clean it and pour the water.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 11
  • Question
    For how long I should wait to enter the pool after I put acid?
    Community Answer
    Depending on how much acid you added and if your filter is moving the water rapidly about a hour, check with your test kit (phenol red), it will let you know the acid level. I add a bit less than calculated and then adjust further in small doses, that saves money. Note: you should retest next day as some cement/concrete pools react with acid causing a small pH bounce.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 7
  • Question
    How can you tell if the acid is working?
    Community Answer
    If the dirt disappears, it's working.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 5
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If you do not see results after the first attempt, you might need to increase the acid/water ratio, scrub harder or increase the time the acid is on the wall. You may have to repeat the process a couple of times to get the walls clean.
        Thanks
        Helpful 3 Not Helpful 8
      • Professionals will add a cleaning additive, like Bio-Dex White & Bright or Aquapoxy Etching Cleaner. This will thicken the acid mix making it adhere better to the walls of the pool. It will also neutralize the smell of the muriatic acid and reduce etching cause by muriatic acid.
        Thanks
        Helpful 1 Not Helpful 2
      • If acid gets into the eyes or mouth, flush the area with the hose (no nozzle) for 15 minutes. If contact is made with the skin, rinse for 30 seconds as soon as contact is made.
        • If possible, dissolve some baking soda in the water to be washed to help neutralize the spilled acid.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Work carefully around the acid. Wear protective clothing, transport the acid safely by securing it in the vehicle, rinse off after you've finished acid-washing the pool, and have at least one other person working with you.
        Thanks
        Helpful 12 Not Helpful 10
      • If the acid is not rinsed completely, it will continue to etch the plaster. Be careful not to allow the acid to run from the shallow end to the deep end as it will create an etched path on the pool floor.
        Thanks
        Helpful 10 Not Helpful 8
      • The acid-washing technique should never be used on a vinyl-lined pool. Detergents and conditioners work best for this type of pool.
        Thanks
        Helpful 7 Not Helpful 10
      • If you accidentally used too much acid, rinse off the excess with water in which you have dissolved a little calcium carbonate, baking soda, or hydrated lime to neutralize it.
        Thanks
        Helpful 0 Not Helpful 0
      Advertisement

      Things You'll Need

      • Garden hose with no nozzle
      • Protective clothing
      • Gloves
      • Mask
      • Goggles
      • Old boots
      • Acid
      • Watering can
      • Pool brush
      • Soda ash
      • Submersible pump
      • Bowl

      You Might Also Like

      How to
      Clean Plaster Walls
      How to
      Properly Maintain Swimming Pool Water Chemistry
      Quick & Effective Ways to Get Rid of Algae in Your Pool
      How to
      Clean a Sand Filter
      How to
      Chlorinate a Pool
      How to
      Lower Chlorine in a Salt Water Pool
      How to
      Add Salt to a Pool
      How to
      Raise pH in Pool
      How to
      Get Rid of Green Water in a Swimming Pool
      How to
      Chlorine Wash a Pool
      How to
      Raise Cyanuric Acid Levels in a Pool
      How to
      Convert a Salt Water Pool to Chlorine
      Advertisement

      References

      1. ↑ https://www.youtube.com/watch?v=rYPV-55U73s
      2. ↑ https://www.youtube.com/watch?v=rnmudstQOHo&feature=emb_logo
      3. ↑ https://www.youtube.com/watch?v=rYPV-55U73s
      4. ↑ https://www.youtube.com/watch?v=rnmudstQOHo&feature=emb_logo/

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 214,717 times.

      Reader Success Stories

      • Jackie Thomas

        May 31, 2017

        "Watching her acid wash the pool showed me how easy it can be. I liked the extra tips for things to watch out for. ..." more
        Rated this article:
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement