How to Adjust Sprinkler Heads

PDF download Download Article
Learn how to change the angle, flow, and settings on your sprinkler heads
PDF download Download Article

You should test and adjust sprinkler heads at the beginning of spring to ensure they’re functioning at their highest level. If your sprinkler is not up to par, it can waste water and cause dry spots in your lawn. Fortunately, you can adjust a broken sprinkler quickly and have it back to normal in minutes!

Things You Should Know

  • Use a flathead screwdriver to turn the screw in the nozzle head clockwise. This will reduce the radius (or how far the water sprays from the sprinkler).
  • Turn the screwdriver counter-clockwise to increase the radius. The more times you twist, the farther the spray will travel.
  • Alternatively, install the two-sided wrench into the raised arrow on the spray nozzle clockwise to decrease the spray radius.
Method 1
Method 1 of 3:

Adjusting a Sprinkler Spray Head

PDF download Download Article
  1. Check the sprinkler for water distribution and see if it’s missing parts of your lawn. Make sure to have the water source at the level you’d set it to if you were actually watering your lawn. Observe how much coverage your sprinkler is providing before making your adjustments. [1]
    • Give the sprinkler a few minutes until you’re sure you’ve seen how it covers the grass.

    Tip : Keep the sprinkler on during the adjustment period to figure out the issue efficiently.

  2. Grab the edge of the nozzle with your thumb and forefinger and turn it to the right to reduce the arc of water. Make this adjustment to water one specific section of your lawn. [2]
    • By turning the arc clockwise, you’re reducing the sprinkler arc and allowing the sprinkler to focus on a smaller section of your lawn.
    Advertisement
  3. If you want your sprinkler to cover both sides of your lawn, turn the nozzle head to the left. Place your thumb and forefinger on the nozzle head and twist it until you get a full fan-like arc. [3]
    • The arc measures how wide the spray goes.
  4. The radius measures how far the water sprays from the sprinkler itself. To adjust it, use a flathead screwdriver and insert into the screw in the middle of the nozzle. Turn the screw to the right to shorten the spray distance. [4]
    • By shortening the spray distance, you can water the grass right in front of your sprinkler more completely.
  5. If you want to water a patch of grass that’s far away from your sprinkler, place the flathead screwdriver in the screw and twist it to the left. The more times you twist the screwdriver, the farther the spray will travel. [5]
    • Once you’re unable to twist the screwdriver, you’ve reached the sprinkler’s radius limit.
    6. Advertisement
Method 2
Method 2 of 3:

Fixing Rotor Heads

PDF download Download Article
  1. Your rotor head sprinkler should come with a two-sided adjustment wrench. The Allen wrench side is used to adjust the spray radius. Find the raised arrow on top of the spray nozzle and place the Allen wrench inside of it. Spin the wrench clockwise to decrease the spray radius. [6]
    • There’s a hole next to the raised arrow. This is where the Allen wrench goes.
  2. To increase your sprinkler coverage, put the Allen wrench inside the hole by the raised arrow and twist it to the left to get a longer spray. Make this adjustment when you need to water plants that are a few feet away from your sprinkler head. [7]
  3. The other side of the wrench is called the “Plastic T”. It goes into the other hole on top of the nozzle head. This hole has a plus and minus sign next to it. When you insert the Plastic T, spin it slightly so it sits flush in the hole. Spin the wrench to the plus-side to increase the sprinkler’s coverage. [8]
    • To decrease the sprinkler’s coverage, spin the wrench to the minus-side.
    4. Advertisement
Method 3
Method 3 of 3:

Testing Impact Sprinklers

PDF download Download Article
  1. This is the easiest way to adjust how far your sprinkler sprays. Twist the knob of your water source to the right to increase the water flow. Turn it to the left to decrease water flow. [9]
    • The knob for the water source should be located on your back porch.
  2. The diffuser screw-in is a nail located on the side of your impact sprinkler. To twist it, hold the sprinkler head with your offhand and turn the diffuser screw-in to the right to lower the spray distance. [10]
    • To increase the spray distance, twist the screw-in to the left.
  3. The deflector shield is a flat piece of metal that sits just above the diffuser screw-in. To lengthen the water distance, keep the deflector shield up as high as it can sit. To shorten the distance, push the deflector shield down a few notches. [11]
    • The further you pull the deflector shield down, the more the water distance lowers.
  4. The trip pin is a piece of metal that sits on the side of the impact sprinkler. It has a thin top and is bent in the middle. To create a 360-spray pattern, flip it up and snap it into place. [12]
    • A 360-spray pattern allows you to relax while your sprinkler waters your yard for you.
    5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    The sprinkler keeps moving away from pointed spray area, does not stay still, no matter how many times it is corrected.
    Addison Smith
    Community Answer
    The sprinkler knob might need tightened. If it is loose, the water pressure can change its position.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Start a Weed Whacker
      How to
      Increase Water Pressure in a Garden Hose
      How to
      Hang a Wheelbarrow on the Wall
      How to
      Make a Wine Bottle Plant Waterer
      How to
      Sharpen Pruning Shears
      How to
      Fix a Garden Hose
      How to
      Disinfect Gardening Tools
      How to
      Operate a Backhoe
      How to
      Hoe Weeds
      How to
      Clean a Garden Sprayer
      Advertisement

      References

      1. ↑ https://resourcecentral.org/sprinklers/sprinkler-maintenance/
      2. ↑ https://www.youtube.com/watch?v=hediV4JOfxM#t=1m38s
      3. ↑ https://www.youtube.com/watch?v=hediV4JOfxM#t=1m41s
      4. ↑ https://home-water-works.org/landscape-irrigation/irrigation
      5. ↑ https://home-water-works.org/landscape-irrigation/irrigation
      6. ↑ https://help.dripdepot.com/support/solutions/articles/11000044369-how-to-adjust-sprinkler-heads
      7. ↑ https://www.youtube.com/watch?v=q9PMFsl497k
      8. ↑ https://www.youtube.com/watch?v=Sv8E5BPx570
      9. ↑ https://www.youtube.com/watch?v=t_jGrpt43MM
      1. ↑ https://www.youtube.com/watch?v=tYnGPiLrEl0&t=7s
      2. ↑ https://www.youtube.com/watch?v=hhUapQpam4E
      3. ↑ https://www.youtube.com/watch?v=hhUapQpam4E

      About This Article

      Thanks to all authors for creating a page that has been read 127,594 times.

      Did this article help you?

      Advertisement