The Easiest Ways to Apply Command Strips or Hooks at Home

PDF download Download Article
Put up picture hangers and hooks with ease using our helpful guide
PDF download Download Article

If you want to hang something on your wall without making a hole or leaving marks, Command strips are the perfect solution. These adhesive strips work great for hanging picture frames, art, and other lightweight objects and they’re so easy to install—just peel the liners off and stick them on. While most Command strips work the same, they have slightly different directions whether you’re putting up picture hangers, hooks, or adjustable strips. Keep reading, and we’ll cover how to use and apply each kind of strip so they stay secure.

Method 1
Method 1 of 4:

Picture Hanging Strips

PDF download Download Article
  1. Command Picture Hanging Strips come in 2 identical pieces that have an adhesive on one side and a Velcro-like fastener on the other. Separate the strips if they’re connected along the edge by pulling them apart slowly. Then, line up the fastener side of one strip with the other, and push the strips together until you hear a click. You’ll usually need 4 pairs of strips (8 strips total) to securely hang a picture, so prep a few additional strips as well. [1]
    • Picture Hanging Strips come in multiple sizes that each have different weight and size limits. Double-check the weight and size of the picture frame you’re hanging and choose the strips that match.
  2. Peel off the liner covering the adhesive on one of the strips you’re using. Place the sticky side of the strip down on the back of the frame in the top corner, and press it down firmly so the rounded tab points down. Place another set of strips in the other top corner the same way. Place the 2 remaining sets of strips about â…” of the way down the picture frame on each side. [2]
    • If your picture frame already has hanging hardware on it, remove the pieces first to ensure it mounts flush with your wall.
    • Avoid placing the strips on paper, fabric, or soft surfaces on the back of your picture frame because the adhesive may not form a strong bond or the material could tear.
    • Avoid using Picture Hanging Strips to put up valuable items or clocks just in case the adhesive fails.
    Advertisement
  3. Take off the rest of the liners from the strips on the back of the frame. Wipe the wall with rubbing alcohol to clean off any residue first. Once the surface is dry, push the frame against the wall and hold it firmly in place for 30 seconds so the adhesive has time to bond. [3]
    • Command strips typically work best on smooth wall surfaces, like drywall, wood, tile, metal, glass, or laminate. However, they may not adhere properly to textured walls, vinyl, wallpaper, brick, fabric, or other rough surfaces.
    • If you want to be precise about where you’re hanging your picture frame, measure and mark the wall beforehand.
    • Command strips don't typically hold up well in humid environments, like bathrooms. [4]
  4. Hold onto the bottom corners of the frame, and gently lift it up toward you to separate it from the strips on the wall. Then, press against each of the wall strips for another 30 seconds to help them stick to the surface even better. [5]
    • Avoid using a lot of force to remove the frame, or you may loosen the strips on the wall.
    • Avoid hanging command strips directly above a heater since the heat could melt the adhesive and cause them to fall. [6]
  5. During the first hour after applying your Command strips, leave them alone so the adhesive can fully bond with the wall. After that, align the strips on the back of the frame with the ones on the wall. Push the frame firmly onto the wall strips until you hear the strips click together. [7]
    6. Advertisement
Method 2
Method 2 of 4:

Indoor and Outdoor Hooks

PDF download Download Article
  1. Look for the side of the Command strip that has the red liner over the adhesive and peel it off. Line up the strip’s adhesive with the flat rectangular plate on the backside of the hook so the rounded pull tab is on the bottom. Press firmly along the length of the strip from the top downwards to attach it to the hook. [8]
    • Indoor strips work well for temperatures between 50–105 °F (10–41 °C) while outdoor strips stay adhered between −20–105 °F (−29–41 °C) [9]
    • Command Hooks come in multiple sizes, and larger hooks have a higher weight limit. Check the weight limit of each hook and the item you plan on hanging from it to ensure it will hold properly.
  2. Peel the black liner off the strip to reveal the adhesive that attaches to your wall. Clean the wall off with rubbing alcohol to get rid of dirt or dust, and then press the hook firmly onto the surface once it's dry. Hold the hook against the surface for 30 seconds to help make the adhesive bond securely. [10]
    • Command Hooks work best on smooth surfaces, like drywall, wood, glass, or metal. Soft or irregular surfaces, like fabric, wallpaper, vinyl, and textured walls, could prevent the adhesive from sticking and cause the hook to fall down.
  3. Hold onto the hook and gently slide it straight up to separate it from the mounting base on your wall. Then, push against the base against the wall with firm pressure for another 30 seconds. [11]
    • Pressing the mounting base directly ensures that the adhesive will bond with maximum strength.
  4. Position the hook above the mounting base, and slide it down to reconnect it. Leave the hook alone for about 1 hour so the adhesive can create a strong bond and support the full weight of the item you’re hanging up. [12]
    • If you’re worried about someone hanging an item by the hook before the adhesive sets, just wait until after an hour passes to reattach it to the base.
    5. Advertisement
Method 3
Method 3 of 4:

Clear Hooks

PDF download Download Article
  1. Tear off one of the clear Command strips from the package. Clean the section of wall where you want to place the hook with rubbing alcohol to remove the dust and let it dry. Then, peel off the black liner labeled “Wall side” on the strip. Then, just press the strip against the wall firmly for about 30 seconds so the rounded pull tab points down. [13]
    • Clear hooks are transparent and have see-through strips so they’re less noticeable on your wall.
    • Clear hooks work best on hard, flat surfaces, like drywall, wood, tile, or glass. They do not work well on textured or soft surfaces, like wallpaper, brick, or fabric.
    • Choose strips and hooks that have a weight limit that fully supports the item that you want to hang up.
  2. Peel the blue liner off the front of the Command strip to expose the adhesive. Line up the rectangular plate on the back of the hook with the strip on your wall and press it down firmly. Keep applying pressure on the hook for about 30 seconds to help the adhesive bond more securely. [14]
  3. The adhesive is still a little weak when you first apply the hook, so leave it alone for 1 hour so it has time to bond with the wall. The adhesive needs time to fully bond to the wall. After an hour passes, your hook is ready to use. [15]
    4. Advertisement
Method 4
Method 4 of 4:

Adjustable Strips and Hooks

PDF download Download Article
  1. Command Adjustables have workable adhesive that lets you reposition the strips a few times before they stick completely. Simply peel a strip off of the backing sheet and press it firmly for 5 seconds into the corner or along the edge of the object you’re hanging. Place a strip in each corner of the object for a more secure hold. [16]
    • Adjustables are made to hang lightweight objects, such as posters, string lights, or other small paper decorations that aren’t in frames. About 4 strips can support 1 ⁄ 4 pound (110 g) of weight.
  2. Clean off the spot where you want to hang the Command strip with rubbing alcohol. Once it dries, peel off the black liner on the strip to expose the adhesive. Line up the object you’re hanging on the wall and gently press the strip against the wall so it stays in place. [17]
    • If you’re using Adjustables with hooks , then remove the purple liner on the strip and press the hook piece onto the adhesive first. Then, remove the strip from the backing paper and press it against the wall. [18]
  3. Adjustables have a light adhesive that forms a stronger bond after about 20 minutes. If you’re not happy with where you hung the picture or object at first, gently peel it off of your wall and place it in a different position. [19]
    • If you reposition the strips more than 3 times, the adhesives may start to wear out and not stick as well to the surface.
  4. Once you’re happy with the position of the strips, press them down against the wall for at least 10 seconds to help the adhesive bond even more. [20]
    5. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Can I use command strips in a bathroom?
    Jason Phillip
    Handyman
    Jason Phillip is a handyman and owner of Iconic Interior Installations based in New York City, New York. With over five years of experience professionally mounting and installing objects through his company, Jason's work includes mounting window AC units, designing art gallery walls, installing kitchen cabinets, and replacing light fixtures on drywall, brick, and plaster. He has been rated a "Top Pro" every year since 2016 by Thumbtack for being one of the highest-rated, most popular professionals on Thumbtack.
    Jason Phillip
    Handyman
    Expert Answer
    Command strips won't work very well in a bathroom because of the humidity. Humidity can prevent the adhesive from sticking to the wall.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    Why are my command strips falling off of the wall?
    Jason Phillip
    Handyman
    Jason Phillip is a handyman and owner of Iconic Interior Installations based in New York City, New York. With over five years of experience professionally mounting and installing objects through his company, Jason's work includes mounting window AC units, designing art gallery walls, installing kitchen cabinets, and replacing light fixtures on drywall, brick, and plaster. He has been rated a "Top Pro" every year since 2016 by Thumbtack for being one of the highest-rated, most popular professionals on Thumbtack.
    Jason Phillip
    Handyman
    Expert Answer
    Command strips can fall off for a few different reasons. Humidity and excessive heat can both prevent the adhesive from sticking to surfaces. Also, it's important to push them all the way into the wall when you're applying them or they could fall off.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Can I use command strips on a cement wall?
    Jason Phillip
    Handyman
    Jason Phillip is a handyman and owner of Iconic Interior Installations based in New York City, New York. With over five years of experience professionally mounting and installing objects through his company, Jason's work includes mounting window AC units, designing art gallery walls, installing kitchen cabinets, and replacing light fixtures on drywall, brick, and plaster. He has been rated a "Top Pro" every year since 2016 by Thumbtack for being one of the highest-rated, most popular professionals on Thumbtack.
    Jason Phillip
    Handyman
    Expert Answer
    Command strips aren't going to work that well on a cement wall because cement is dusty and the dust won't allow for the glue to stick that well. Your best option is to use a hammer drill to drill into the wall, put an anchor into the wall, and then screw into it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 2
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you ever need to remove Command strips you put up, hold the strip in place with one hand and the rounded pull tab with the other. Gently pull the tab straight down to separate the adhesive from the wall and remove the strip. [21]
        Thanks
        Helpful 0 Not Helpful 1
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Undo Zip Ties Without Breaking Them
      How to
      Set and Use a Torque Wrench
      How to
      Remove Rivets
      How to
      Calibrate a Torque Wrench
      How to
      Make Velcro Stick Again
      How to
      Easily Load a Packing Tape Gun
      How to
      Hang Something on Brick
      How to
      Remove a Stuck Bolt
      Best Ways to Remove a Snapped Off Bolt
      How to
      Make the Coolest Rubber Band Ball Ever
      How to
      Clean Velcro & Make It Stick Again
      How to
      Use Lock Washers
      How to
      Install Grommets
      How to
      Use a Rivet Gun
      Advertisement

      References

      1. ↑ https://multimedia.3m.com/mws/media/1548428O/product-catalogue-command-india.PDF
      2. ↑ https://youtu.be/docWg4iJvBU?t=46
      3. ↑ https://www.command.com/3M/en_US/command/how-to-use/picture-hanging-strips/
      4. ↑ Jason Phillip. Handyman. Expert Interview. 2 July 2020.
      5. ↑ https://multimedia.3m.com/mws/media/1383416O/medium-picture-hanging-strips-white-4pk-instruction-sheet.pdf
      6. ↑ Jason Phillip. Handyman. Expert Interview. 2 July 2020.
      7. ↑ https://multimedia.3m.com/mws/media/1383416O/medium-picture-hanging-strips-white-4pk-instruction-sheet.pdf
      8. ↑ https://www.command.com/3M/en_US/command/how-to-use/all-other-hooks/
      9. ↑ https://multimedia.3m.com/mws/media/1070174O/17083bz-awes-command-outdoor-large-metallic-bronze-desgnr-hk.pdf
      1. ↑ https://youtu.be/kA1jruY-94o?t=18
      2. ↑ https://multimedia.3m.com/mws/media/1095492O/17082es-34871716436.pdf
      3. ↑ https://www.command.com/3M/en_US/command/how-to-use/clear-hooks/
      4. ↑ https://www.command.com/3M/en_US/command/how-to-use/clear-hooks/
      5. ↑ https://multimedia.3m.com/mws/media/1070169O/17093clres-command-large-clear-hook-with-clear-strips.pdf
      6. ↑ https://multimedia.3m.com/mws/media/1070169O/17093clres-command-large-clear-hook-with-clear-strips.pdf
      7. ↑ https://www.command.com/3M/en_US/command/products/adjustables/
      8. ↑ https://multimedia.3m.com/mws/media/2161804O/commandr-adjustablestm-repositionable-mounting-squares-48-squares-17812-48es.pdf
      9. ↑ https://multimedia.3m.com/mws/media/1690451O/3m-command-instructions-17831clr-4es-34872395081.pdf
      10. ↑ https://www.command.com/3M/en_US/command/products/adjustables/
      11. ↑ https://multimedia.3m.com/mws/media/2161804O/commandr-adjustablestm-repositionable-mounting-squares-48-squares-17812-48es.pdf
      12. ↑ https://multimedia.3m.com/mws/media/1548428O/product-catalogue-command-india.PDF

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 117,264 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement