How to Batik

PDF download Download Article
PDF download Download Article

Batik is a Javanese method of producing designs on fabric by using a wax resist. Once the fabric is painted with wax designs, it is placed in a dye bath where only the areas with no wax are dyed. Batik masters can produce complex designs by layering colors and using cracks in the wax to produce fine detail lines. Even if you are not a master, you can get some great effects using just a few materials and a creative spirit.

Method 1
Method 1 of 3:

Batiking Basics

PDF download Download Article
  1. Use hot water to wash the fabrics in a detergent (such as Synthrapol) [1] to remove chemicals and impurities that can affect dyes.
  2. These base colors are the colors that will show under the wax resist.
    Advertisement
  3. Batik wax comes in a brick that needs to be melted in either an electric wax pot or a double boiler.
    • Use caution with hot wax. Do not heat it above 240° as it could begin to emit fumes or even catch fire.
    • It is not recommended that you heat the wax on the stovetop. Wax pots and double boilers heat the wax slowly and at a lower heat.
  4. [2] The hoop will keep the fabric taught and stable, allowing you to apply wax with greater precision.
    • If you are applying designs to large swaths of fabric, you can lay newsprint or cardboard on your work surface without stretching it on a hoop. The wax will penetrate through the fabric, so a protective surface underneath is highly recommended.
  5. [3] Various tools will yield different line qualities, so some experimentation beforehand is recommended. [4]
    • Use a single-spouted tjanting tool to draw thin lines and designs. It is a standard tool that is very versatile and comes in a variety of spout sizes.
    • A double-spouted tjanting tool creates parallel lines and can also be used in filling larger areas.
    • Brushes can also be used to cover large areas. They can be used traditionally, in broad strokes, or as a stippling tool for a dot pattern.
    • Use stamps for the application of uniform shapes. Stamps can be made of anything that can take the heat of the wax. Try carving a potato into a shape, or using the end of a celery stalk to stamp out half circles.
  6. The wax should be hot enough to penetrate through the fabric, but not be so hot and thin that it spreads when applied. The wax will be clear if it has penetrated to the other side of the fabric.
  7. When considering which dye colors to use, it is recommended that you begin with the lightest colors first (like yellow) and then move toward darker colors. [5]
    • Wash your fabric in Synthrapol.
    • Dissolve your dye by following the instructions on the package. Some dyes (like reds) are harder to dissolve than others.
    • Add in the appropriate amount of non-iodized salt. For a 1/2 pound of dry fabric, add 1 1/2 cups of salt. For a pound of fabric, use 3 cups of salt.
    • Add in your damp fabric. Stir gently, but frequently for 20 minutes.
    • Mix up your soda ash. Soda ash, or sodium carbonate, is used to bond the dye to the cellulose in fiber. Dissolve the ash in warm water and add it into the tub slowly (over the course of 15 minutes), being careful not to dump it directly onto the fabric (which could cause discoloration). For each 1/2 pound of dry fabric, add in 1/6 cups of salt. For a pound of fabric, use 1/3 cup of salt. Stir gently, but frequently for another 30 minutes.
    • Rinse your fabric and wash out excess dye. Run cool water over your fabric until it runs clear. Then wash it in hot water using Synthrapol. With some darker colors, like red or brown, a second washing may be necessary to remove all excess dye. Allow the fabric to dry.
  8. With every additional layer you wish to add, follow the steps for tub dyeing. Remember to tub dye your darkest colors last.
  9. When you are done with all the color dyeing, you may remove the wax in one of two ways: [6]
    • Boil the wax out. Fill a pot large enough to hold your fabric with water and a few drops of Synthrapol. Once the water begins to boil, add in your fabric and weigh it down with a rock to keep the wax (which will be floating at the top) from re-bonding with the fabric. After a few minutes, the wax will pull out of the fabric. After all the wax appears to be out of the fabric, allow the pot to cool completely, and peel the wax layer from the top of the pot.
    • Iron the wax out. Place the fabric between two sheets of absorbent paper and run the iron over the sandwiched fabric. The wax can leave behind a residue, so use care to ensure the wax is removed. Periodically changing out the papers can aid in wax removal.
  10. Throw your fabric into the washing machine with Synthrapol one last time to ensure all of the dyes have been released. Dry your fabric either on a line or in the dryer. All batiked! [7]
    11. Advertisement
Method 2
Method 2 of 3:

Batiking Without Wax

PDF download Download Article
  1. Lay your pre-washed and pre-dyed fabric over the overlapped sheets of plastic wrap.
  2. As with traditional batiking, you may use the single or double-spouted tjanting tool to create thin lines for designs. Use paint brushes to cover larger areas with the medium. Allow the medium to dry for approximately 30 minutes, though the exact dry time depends on how thickly the medium was applied.
    • Consider using stamps dipped in the medium to create a repeat pattern. You can use a stencil by placing it down on the fabric and dabbing the medium around it with a foam brush.
  3. Follow the instructions on the package to mix up the dye. If you are using a liquid dye, adjusting the water-to-dye ratio can create softer (add more water) or more vivid colors (add more dye).
  4. Dyes can be dribbled, painted, sprayed, or dabbed on. Consider mixing two or more colors to create color variations. [8]
  5. Once you have finished with your dye application, cover the fabric with plastic wrap and seal the edges.
  6. Place paper towels on the bottom of the microwave oven to protect against spills. Place your plastic-covered fabric in the microwave oven (you may need to fold the fabric) and cook on high for 2 minutes. [9]
  7. Using thick rubber gloves, carefully remove the fabric from the microwave oven. The fabric will be hot, so use caution! Allow the fabric to cool for a few minutes before removing the plastic.
  8. Rinse your fabric under cool water until it runs clear. After you've removed the initial dye, wash the fabric in warm water with a mild detergent, and rinse. Dry your fabric. [10]
    9. Advertisement
Method 3
Method 3 of 3:

Batiking Silk (Alternate Method)

PDF download Download Article
  1. Add a drop or two of liquid dish soap to a tub or bucket of water. Rinse and dry your fabric. [11] While still slightly damp, press your fabric with an iron set to the "silk" setting.
    • If you wish to sketch out a design instead of painting it freehand, this would be done after ironing.
  2. Apply safety pins connected to rubber bands around the edges of your silk--every 4–6 inches (10.2–15.2 cm). Lay your silk over the frame and begin to apply push pins to the frame. The rubber bands will hook around push pins set into the frame to create a taut trampoline.
    • The rubber bands should be small enough to maintain good tension, but long enough to as to avoid tearing the fabric.
    • You can link two rubber bands together to create longer ones if your frame is much larger than the piece of silk.
    • The goal is to create a taut surface on which to paint. The surface should be taut, but should not be too tight that it begins to tear.
  3. Place 4 plastic cups or containers under the frame to raise it off the work surface.
  4. [12] The resist can be applied with a paintbrush, or through the narrow spout of an applicator bottle. Allow the resist to dry completely before moving on to color. Depending on preference, two types of resists work well for silk painting:
    • Rubber-based resists, or guttae, are similar in consistency to rubber cement and can be diluted to a thin consistency useful for drawing finer lines. After the color has been set, they are removed by dry-cleaning the finished fabric. The downside of this resist is the fumes it produces. It is recommended that you use a respirator in a well-ventilated area when applying rubber-based gutta.
    • Water soluble resists are non-toxic, odorless, and wash away in warm water. These resists work well in conjunction with silk paints (as opposed to dyes), which are heat set with heat. The downside to this resist is that it's not as free-flowing as other guttae, and fine details are harder to achieve.
  5. Carefully apply your dye or paint with a brush. Allow the color to flow towards an area of resist. Painting directly on the resist may cause it to dissolve and fill in. There are two options when it comes to color:
    • Silk paints are pigment-based products that color the surface of the fabric, but do not penetrate the fabric's fiber. These colors can be used on a wide variety of fabrics (including synthetics) and are set with a dry iron
    • Silk dyes color fabric by forming a bond with the fibers in the fabric. These are a wonderful choice if you do not want to diminish the natural luster of silk. Colors are light-fast and washable.
  6. If you have opted for silk paints, heat-set the color by applying the iron for 2-3 minutes on the back side of the fabric. After ironing, rinse the silk in warm water, hang it to dry, and iron again while still slightly damp. [13]
    • If you used silk dyes, after allowing the color to dry for 24 hours, rinse the fabric until the water runs clear. Add a couple of drops of light detergent or dish soap to a bucket or tub and wash the silk. Rinse again with cool water, and hang to dry. When the silk is almost dry, apply a dry iron heated to the "silk" setting.
    7. Advertisement


Community Q&A

Search
Add New Question
  • Question
    Can I use tracing paper to iron it out?
    Community Answer
    Yes, there shouldn't be any problem on delicate fabric.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 7
  • Question
    How do I clean an old batik picture?
    Community Answer
    If it isn't framed or can easily be removed from the frame, you can hand-wash in cold water with a very small amount of mild detergent such as Woolite, and hang to air dry.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 2 Helpful 4
  • Question
    What do you do if you have a large quantity of fabric that won't fit into your microwave?
    Community Answer
    Get a bigger microwave, put it in the oven, or heat it in another form.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 14 Helpful 2
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • If you place your dyes in applicator bottles (with tips) you can apply multiple dyes at once.
        Thanks
        Helpful 0 Not Helpful 0
      • If you want a solid line, use beeswax. If you want a crackling effect use a 3:2 mix of beeswax and paraffin.
        Thanks
        Helpful 0 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Use a respirator when using dyes that produce fumes. Working in a well-ventilated area is also highly recommended.
        Thanks
        Helpful 17 Not Helpful 2
      • If your batik wax catches fire, do NOT try to douse the flames with water! Water will spread the fire. Instead, use a fire extinguisher or baking soda.
        Thanks
        Helpful 23 Not Helpful 4
      • Wear gloves to protect your hands from the dye. Some dyes can harm your skin and all dyes will stain your hands.
        Thanks
        Helpful 17 Not Helpful 5
      Advertisement

      Things You'll Need

      Batiking Basics

      • Fabric detergent, such as Synthrapol
      • Light-weight cotton, muslin, or silk fabric cut to your preferred dimensions
      • Fabric dye (either a powdered fabric reactive dye, or liquid dye, such as Rit)
      • Batik wax
      • Electric wax pot or double boiler
      • Embroidery hoop
      • Newsprint or cardboard
      • Tjanting tools, or Batik pens (tjanting tools are filled with wax and allow you to draw fine lines and details on the fabric)
      • Paint brushes
      • Large plastic tub
      • Iron

      Batiking Without Wax

      • Plastic wrap
      • Pre-washed white or pre-dyed fabric (cotton, muslin, or silk)
      • Washable resist medium, such as Crafter's Pick Batik-EZ Resist Medium
      • Tjanting tools, or Batik pens (tjanting tools are filled with wax and allow you to draw fine lines and details on the fabric)
      • Paint brushes
      • Liquid fabric dye, such as Rit
      • Microwave oven
      • Mild detergent

      Batiking Silk (Alternate Method)

      • Silk stretching frame or canvas stretcher frame that is 2–3 inches (5.1–7.6 cm) larger than your piece of silk in every direction.
      • Silk fabric
      • Safety pins
      • Rubber bands
      • Push pins
      • 4 plastic cups or containers
      • Water-soluble or rubber-based gutta (resist for silk dyeing)
      • Silk paints, or silk dyes
      • Applicator bottle
      • Paint brushes
      • Iron

      You Might Also Like

      How to
      Tie Dye a Shirt
      How to
      Identify a Painting
      How to
      Animate in Procreate
      How to
      Make a Mannequin
      How to
      Write in Calligraphy
      How to
      Design a Playbill
      How to
      Create a 3D Model Using Design Software
      How to
      Make Stickers on Procreate: A Step-by-Step Guide
      How to
      Use a Calligraphy Pen: Modern & Classic Styles
      Quick Ways to Change Layer Opacity in Procreate & Procreate Pocket
      How to
      Host a Successful Art Exhibition
      How to
      Critique Artwork
      How to
      Sign a Painting
      How to
      Do Digital Art on Your Phone
      Advertisement

      References

      1. ↑ https://www.nationalquilterscircle.com/video/how-to-rinse-dyed-fabrics-using-synthrapol-003813/
      2. ↑ https://www.dmc.com/US/en/video-introduction-embroidery#null
      3. ↑ https://theartofeducation.edu/2016/04/05/step-step-guide-batik/
      4. ↑ https://www.globalmamas.org/Info/BatikInstructions
      5. ↑ https://www.dharmatrading.com/info/batik-wax-tub-dye-method.html
      6. ↑ https://www.globalmamas.org/Info/BatikInstructions
      7. ↑ http://www.dharmatrading.com/techniques/batik-instructions.html
      8. ↑ https://www.onlinefabricstore.net/makersmill/how-to-dye-fabric-no-wax-batik-technique/
      9. ↑ https://www.ritdye.com/instructions/how-to-dye-using-the-microwave-method/
      1. ↑ http://www.ritdye.com/dyeing-techniques/wax-less-batik-dyeing
      2. ↑ https://www.thelaundress.com/clean-talk-blog/content/how-to-wash-silk.html
      3. ↑ https://www.dharmatrading.com/techniques/silkpaint/silk-painting-techniques.html
      4. ↑ https://www.dharmatrading.com/techniques/silkpaint/silk-painting-techniques.html
      5. Belfer, N. (1992) Designing in Batik & Tie Dye . Englewood Cliffs: Prentice-Hall, Inc.

      About This Article

      Article Summary X

      Before batiking, dye your fabric in base colors that will show under the wax resist. Then, melt your batik wax in an electric wax pot or double boiler. Stretch your fabric on an embroidery hoop to keep it taught and stable, and use a variety of tools and instruments, such as stamps and brushes, to apply the wax. After applying your first layer of wax, tub-dye your fabric before adding more layers of wax. When your fabric is finished, remove the wax by boiling or ironing it out. To learn how to batik without wax, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 385,218 times.

      Did this article help you?

      Advertisement