PDF download Download Article PDF download Download Article

The door clicks shut behind you only for you to realize it's locked. Don't panic! When you're locked out, you’re not powerless. You can get back inside through an open window, by prying a window open, by forcing a spring lock with a plastic card, or by removing the doorknob—all without breaking anything. Keep reading to find out how.

Method 1
Method 1 of 5:

Through a Window

PDF download Download Article
  1. First floor windows will be easiest and safest, but these are also the most likely to be locked. You’ll have better chances of finding a second floor window left open, but exercise caution - you don't want to fall!
    • If a ladder isn’t available, you may have to get creative to reach a second story window. Is there a fire escape you could climb? A trellis? A tree ? Whatever you use, make sure it’s stable before climbing. [1]
    • Casement windows (side-hinged windows) may be easy to pry open with your fingers or a thin tool if they aren't locked.
  2. You don’t have to feel shy or embarrassed. Most everyone has an “I locked myself out” story, so they’ll likely understand your predicament.
    • A flathead screwdriver will work best, but if you’re handed a Phillips head (cross slot) screwdriver, give it a shot anyway.
    • This technique can be effective for removing or partially prying open door windows. Even a small gap may allow you to reach inside and open the lock.
    Advertisement
  3. The beading is the plastic or metal strip around the window frame. Insert your screwdriver into the beading channel at one corner and pry it out a little bit at a time. Work your way to the opposite corner. When the beading has been completely loosened, pull it free with your hands.
    • Check the corner of the window to see whether the vertical (up and down) beading overlaps the horizontal (left and right). Remove the overlapping beading first.
    • Removing the beading may deform it. In some cases, beading can be quite expensive. Keep this in mind before attempting entry in this way.
    • Depending on your situation, you may be able to leave the beading in place and still lever the window free. Some windows may not even have beading. [2]
  4. Insert your screwdriver between the glass and frame. When prying, use light force while working your tool in between the mounting and glass to lever the glass out of its mounting. The window should come out relatively easily. [3]
  5. Support the glass with your free hand so it doesn’t fall and shatter when it comes free. Slide the glass free of its mounting, place it off to the side, and enter your house through the empty window. [4]
    • If your window has only partially popped free of the mounting, try to reach either a set of keys, the lock, or the door handle.
    • If there's any broken glass, be incredibly careful. Jagged glass may be sharper than you think.
    • In the event of a deep cut, treat the wound as best you can and see a doctor, if necessary.
  6. Advertisement
Method 2
Method 2 of 5:

With a Plastic Card

PDF download Download Article
  1. The card technique will only work on a spring latch. Spring latches are generally the kind that move with the handle when it is turned. Turn the handle to make sure that the spring lock is engaged. If it doesn't turn, it's locked.
    • A dead bolt is often located above or below the handle. If the handle moves but the door doesn’t open, the dead bolt is locked and you'll need to try a different method.
    • This method will be much less likely to work on modern locks, which are designed to be less vulnerable to unlocking with a plastic card.
    • Handles attached to a spring latch will "spring" back to their original position after you turn them.
  2. When opening a door with a plastic card, the card may be damaged. Because of this, you should avoid using important or frequently used cards, like credit cards. A library card or point card will be less of a big deal to replace. [5]
    • Laminated cards tend to work best. These cards are bendy and can be inserted more easily between the door and its frame.
  3. Press on the door with moderate force with your non-dominant hand. This will create some extra space between the door and frame, making it easier to insert your card. Work your card into this gap just above the doorknob on a downward angle. [6]
    • If there's molding on the frame, there will be less space between the door and frame, making this process more difficult. In these cases, you may want to try another method to prevent costly damage.
  4. Your card is wedged between the door and frame, right? Wiggle it deeper into the space between the doorknob and doorjamb until you meet resistance. This is the lock mechanism, which you’ll need to force back to disengage.
    • Feel around with the bottom corner of your card a little bit. You should feel the angled part of the latch facing towards you.
    • If the sloped side of the latch isn't facing you, you'll need to slide a long piece of plastic behind the latch to work it from the angled side. [7]
  5. Press the card away from the knob to apply greater pressure to the latch. It’s unlikely you’ll be able to completely disengage the latch this way, but when you feel it start to give, push on the door and it should open. [8]
    • This may take a bit of maneuvering. Try different positions until you find one that allows the card the most purchase on the lock mechanism.
    • Although this won’t be necessary for some latches, it may help open the door if you turn the knob lightly with your free hand disengaging the latch. [9]
  6. Advertisement
Method 3
Method 3 of 5:

By Removing the Doorknob or Door

PDF download Download Article
  1. A lock can be manually disengaged by taking the knob apart, and even quality locks won’t stop you if the door is off its hinges. Doorknobs will require a screwdriver or paperclip; hinges will need a nail and a pounding tool, like a hammer or rock.
    • Borrow these items from a neighbor or snag them from your tool shed. If your car is open, you might have some emergency tools there, too.
    • The kind of screwdriver you need will depend on the kind of door you have. Knobs and hinges are often fastened with Phillips head (cross slot) screws.
    • Even if you don’t have a screwdriver available, you may be able to remove fasteners with a suitably thin, sturdy tool, like a butter knife or a bent pin.
  2. Ideally, you’ll be able to see mounting screws connecting the knob to the door. These can be simply unfastened with your screwdriver to take apart the knob. Pull the knob free of the door, and disengage the latch with your fingers.
    • Depending on the kind of lock installed in your door, you may be able to disengage the lock immediately after removing the knob, or you may need to remove a secondary mounting plate.
    • Some knobs may only have a screw fastening the knob to the spindle that both knobs are attached to. To remove these, loosen the screw on the metal connecting the knob to the door.
  3. Some knobs may have a pin-size hole in the front of the knob instead of mounting screws. Insert a thin piece of metal, like a straightened paperclip, as deep into the hole as possible while twisting the knob and pushing on the door to open it.
    • In some situations, you may find that fastening hardware for knobs, like screws and bolts, are only accessible from the inside. [10]
  4. The hinges are usually the most vulnerable part of a door, requiring only a nail to bypass. Place a nail (or a similar item) at the bottom of the opening for a hinge pin. Then hit the nail with a tool (like a hammer or rock) to push the pin out. Do this for all hinges.
    • The hinge pins may be stiff when you remove them, even after they’ve been partially pushed out with a nail. For easier removal, use a screwdriver like a chisel under the rim of the pin head to pop it free.
    • Much like knobs, doors that are well-installed may not have outside accessible hinge pins. You won’t be able to easily pop the door off its hinges if this is the case for you. [11]
  5. Most sliding glass doors, opposed to traditional hinged doors, are not directly fastened to your home's structure. Many rest in a track and are locked in place, and by jumping the door out of the track, you can easily bypass it.
    • You may be able to jump a light sliding glass door by prying up and outward with a flathead screwdriver (or two), but a prybar or crowbar will work best.
    • Be careful when trying to get your door to jump its track. If it falls, it could cause expensive damage.
    • To make sliding doors in your home less vulnerable to break ins, you may want to secure your door with a security bar, like a wooden dowel. [12]
  6. Advertisement
Method 4
Method 4 of 5:

Through the Garage Door

PDF download Download Article
  1. You may have a spare hanger in your car or in outdoor storage, but if not you’ll have to go door-knocking until you find a pleasant neighbor who can give you one. Really, any piece of sturdy yet moldable wire will do.
    • Even thin wire, like the kind use in electrical work, can be doubled up for improved stiffness and used to open your garage door. [13]
  2. The rod needs to be as long as possible. If you find that the reach of your hanger is insufficient, wrap the non-hook end around an extension, like a branch.
    • If possible, double up the wire of the coat hanger to make it sturdier. This may only be possible if you have an extra hanger or leftover wire.
  3. For some garages, this may be impossible. But if your garage has a gap at its top, you should be able to snake in the rod hook-end first.
    • You may find it easier to insert the rod from the sides, but it’ll need to be in the center of the door to disengage its lock.
    • Be careful when doing this if there is a soft plastic molding around the door. Inserting your rod between the molding and the door could cause damage it, which can be expensive to replace. [14]
  4. The manual release latch is located just below where the arm for the opener attaches to the garage door track. Maneuver the hook around the latch and pull with firm, steady pressure until the latch disengages. Now you can slide the door up and open. [15]
    • Many garage door releases have a string attached so you can pull and disengage the release from inside the garage. Use this string as a point of reference when looking for the release.
    • If you can't see into your garage, feel along the door's metal track toward the opener motor. When you feel a ridge poking out of the track to the rear of the motor, you’ve found the release.
  5. Advertisement
Method 5
Method 5 of 5:

Seeking Help

PDF download Download Article
  1. If you've entrusted a key to a friend, family member, or neighbor, now's the time to retrieve it. If you don't have your phone on you, head to a neighbor to call a key holder to help you out of this bind.
  2. This is generally a last resort. Having your landlord come unlock the door oftentimes costs a fee. And that's if they answer the phone. If your landlord isn't answering, or if you can't find their number, this option may lead to a dead end. [16]
  3. Locksmiths are trained in techniques and equipped with tools that will, in most cases, help you break into your home without doing any damage. The cost of a locksmith varies widely depending on location, and can range from as low as $15 and as high as $75 (or more, depending on the lock). [17]
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How would I be able to do these without a neighbor or a passing pedestrian calling the cops?
    Community Answer
    If someone seemed suspicious, you would probably be able to prove your innocence to them by readily explaining it was your house. If they didn't believe you and the police did come, you could prove home ownership or proof of residency.
  • Question
    How do I get into a screen door from the outside?
    Community Answer
    Rip the screen. Or, use a credit card (debits also work), key, hair pin, large paper clip or small flat screwdriver to shove into the door seam and depress or release the spring-loaded latch.
  • Question
    Can a vertical out-swing window be pulled off the metal arms that push the window in and out a short distance?
    Community Answer
    Yes, it could. Some are made to detach easily for cleaning, and others just need to be unscrewed.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      • A small person may be able to fit inside a doggy door and unlock the door for you from the inside. However, if it’s a tight fit, don’t force it. You don’t want to accidentally damage the door (or get the person stuck).
      • Keep a spare key outside somewhere safe, or leave one with a trusted neighbor to avoid this situation.
      • A screwdriver can be a lifesaver when you’re locked out. This tool can also be easily hidden in an inconspicuous place for emergencies (like when you need to break into your home).
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Any damage you do to your house/door/lock will need to be fixed later, especially if you rent your home. Some of these repairs (like damaged woodwork) can be costly. When in doubt, call a locksmith.
      • Technically, you can be arrested for breaking into your own home, but it is highly unlikely that charges will be pressed, especially if you can prove you are the lawful resident.
      • Professional security companies explicitly warn against even attempting to break into your own house. Ideally, your home should be too secure for anybody to forcibly gain access.
      Advertisement

      Things You'll Need

      Through a Window

      • Ladder
      • Screwdriver

      By Removing the Doorknob or Door

      • Screwdriver
      • Nail (or a similar stiff, narrow item)
      • Paperclip (or similar item; optional)

      About This Article

      Article Summary X

      If you get locked out of your house and need to break into it, see if there are any first-floor windows that are unlocked. If there aren't, try using a ladder to reach your second-floor windows, which are more likely to be unlocked. You could also borrow a screwdriver from your neighbor to remove the window beading from your window frame. Insert the screwdriver into the beading channel at one corner and pry it out a little bit at a time, then pull it free. From here, you should be able to pry open the window pane from the bottom and remove the glass completely. For more advice, including how to break into your house using a plastic card, scroll down!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 1,407,131 times.

      Reader Success Stories

      • Morgan Stoneman

        Feb 3, 2018

        "I always have to wait for my mum picking my niece up from school after I walk home, so this would be helpful for ..." more
      Share your story

      Did this article help you?

      Advertisement