PDF download Download Article
Easy ways take apart and deep clean your Keurig
PDF download Download Article

A Keurig machine is amazing for making single-cup brews, but they can get pretty dirty if they don’t receive a good cleaning every now and then. This article will walk you through disassembling your Keurig and washing the removable parts, unclogging the brewing needles, descaling the tank, and replacing the water filter. By following this guide, you’ll have a sparkling-clean Keurig that’ll be ready to dispense your favorite beverages every day.

Things You Should Know

  • Remove the water reservoir, drip tray, and pod holder and rinse them with warm water.
  • Insert a straightened paper clip into the brewing needles and the tube in the pod holder to unclog them, then run a water-only cycle.
  • Pour equal parts descaling solution and water into the water reservoir and continuously run brewing cycles until the water reservoir is empty.
Method 1
Method 1 of 4:

Washing the Drip Tray & Water Reservoir

PDF download Download Article
  1. 1
    Unplug your Keurig before cleaning it. In order to be as safe as possible, make sure to turn off your Keurig by pressing the power button. Then, completely unplug your Keurig from any power sources before you start disassembling and cleaning it. [1]
  2. Watermark wikiHow to Clean a Keurig
    Slide the tray toward you to easily remove it. If there’s liquid in it, do your best to not jostle it too much and keep it level so that nothing spills out. Rinse it in the dishwasher on the top rack, or clean it with soapy water and a soft cloth. Then, let the drip tray air dry completely or dry it with a soft towel. [2]
    • Clean your drip tray at least once a week or whenever you notice a lot of liquid starting to collect in it.
    • Clean the area beneath where you pulled out the drip tray as well in case any liquid managed to spill down there.
    • Use something like a toothbrush to scrub at any stubborn buildups that won’t come off easily.
    Advertisement
  3. Watermark wikiHow to Clean a Keurig
    To remove the water reservoir from your Keurig, simply lift it up from where it’s located on the side of the machine. Dump out any excess water into the sink, then use soapy water and a non-abrasive cloth to thoroughly clean the inside and outside of the reservoir. If you have a Keurig water filter in the reservoir, remove that before cleaning out the reservoir. Let the reservoir air dry completely before reassembling. [3]
    • Clean your water reservoir at least once a week.
    • Do not put the water reservoir in the dishwasher.
    • If your water reservoir has a filter screen on the bottom, aim a strong stream of water at the screen to clean off any buildups of dirt or debris.
    • Avoid using a cloth to dry the inside of the reservoir since it may leave behind lint that could get into your water.
    • Place the water reservoir upside down on a towel while it air dries to make sure all of the water drips out.
  4. Once the water reservoir and drip tray have completely dried, place them back in their proper positions. Snap the water reservoir back into the side of the Keurig and slide the drip tray back into position on the bottom. Then, take a damp, soapy cloth and use it to do a thorough wipe-down of the entire machine. Finally, dry it with a non-abrasive towel or let it air dry. [4]
    • Don’t plug your Keurig back into the power source until it’s completely dry.
    • Never submerge your Keurig machine entirely in water. Only rinse the removable water reservoir and drip tray.
    • Wipe your Keurig off every time you use it to keep it clean and prevent any residue from forming.
    • If your Keurig has a touchscreen display, wipe it dry with a paper towel when you’re finished cleaning it so it doesn’t get damaged.
    EXPERT TIP

    James Sears

    House Cleaning Professional
    James Sears leads the customer happiness team at Neatly, a group of cleaning gurus based in Los Angeles and Orange County, California. James and the team have nine years of experience and offer green cleaning, interior and exterior window washing, and general apartment cleaning services. He provides transformative cleaning experiences by reducing clutter and renewing your home environment. James is a Trustee Scholar at the University of Southern California.
    James Sears
    House Cleaning Professional

    Opt for an all-natural, plant-based cleaner to clean your Keurig. Whenever possible, try to avoid using toxic or synthetic chemicals around an item that you'll be eating or drinking from.

  5. Advertisement
Method 2
Method 2 of 4:

Unclogging the Needle & Pod Holder

PDF download Download Article
  1. Watermark wikiHow to Clean a Keurig
    Lift the handle on top of your Keurig to access the pod holder. Grab the edges of the pod holder and pull up carefully to remove it from the machine. Then, separate the funnel from the pod by gently twisting it and pulling them apart. [5]
    • When separating the pod holder and funnel, make sure to do so over your sink or a trash can in case any loose coffee grounds, dirt, or other debris spills out.
  2. 2
    Clean out the tube of the pod holder with a paper clip. Poke a straightened paper clip through the tube of the pod holder and swirl it around to dislodge any buildups of coffee grounds. Make sure to do this over your sink, garbage can, or a paper towel to catch anything that falls out. If you don’t have a paper clip, use anything thin and sharp to do this step, such as a toothpick. [6]
  3. 3
    Rinse the pod holder and funnel with warm water. Avoid using any soap when cleaning out your pod holder since it could affect the flavor of your coffee if you don’t manage to rinse all of it out. Once you’re done rinsing out the two pieces, let them air dry completely. [7]
    • If your Keurig is dispensing your drink at a much slower pace than normal or if you hear any strange gurgling or sputtering sounds, these might be signs it’s time to unclog the needles.
    • As a general rule of thumb, clean and unclog your Keurig’s needles once a month or more.
    • A second needle is at the bottom of the pod holder, so be careful when rinsing it since it’s very sharp.
    • Use a damp cloth or a toothbrush to scrub around the area where you insert the pod holder into the machine in case there’s any buildup of dirt there.
  4. Watermark wikiHow to Clean a Keurig
    The needle is located inside your Keurig above the pod holder. Use a straightened paper clip, or something else small and sharp, and poke it inside the hole in the center of the needle. Work the paper clip back and forth to loosen any coffee grounds or scale that may have gotten stuck inside. [8]
    • Be careful while cleaning the needle since it’s very sharp.

    Tip: Some Keurig needles will have 2 holes in them. Be sure to clean out each hole so water can flow easily through it.

  5. Watermark wikiHow to Clean a Keurig
    Once the pod holder and funnel have completely dried, reassemble them by pressing them together. Then, set the entire pod holder into the space where you pulled it out and gently push it back into place. You’ll hear the pod holder click once it’s secured again. [9]
    • Make sure the pod holder is lined up correctly. There’s usually an arrow on the pod holder and the Keurig to show which way to insert it.
  6. Watermark wikiHow to Clean a Keurig
    Place an empty mug on the drip tray underneath the dispenser. Then, fill the water tank up to the max fill line and select the largest cup size to start a water-only brew on your machine. Let the water fill the mug until the first cycle is finished. Finally, empty the mug and run the machine one more time with just water so it can clean out any residue. [10]
    • Some Keurig machines will make you press a button on a touchscreen to confirm that you want to run the cycle without a K-cup.
    • Other models may make you lift the handle and close it again before starting another cycle.
  7. Advertisement
Method 3
Method 3 of 4:

Descaling the Tank

PDF download Download Article
  1. Watermark wikiHow to Clean a Keurig
    Take the reservoir off of your Keurig machine and dump out any water that’s inside. If your Keurig has a water filter, pull it out of the tank and set it aside while you descale the machine. Put the water tank back onto your Keurig once it’s empty. [11]
  2. Watermark wikiHow to Clean a Keurig
    Pour a full bottle of Keurig descaling solution into the water tank, which is usually around 14 oz (410 ml). Fill the empty bottle with water from your sink and add it to your tank to dilute the solution. [12]
    • Another option is to clean your Keurig with white vinegar . Instead of the descaling solution, fill the water reservoir with equal parts white vinegar and water (about 14 oz (410 ml) each).
    • Use distilled water when descaling your machine and also when brewing drinks to avoid having to descale your Keurig as often.
  3. Watermark wikiHow to Clean a Keurig
    Place a mug underneath the dispenser so the descaling solution-water mixture doesn’t spill when you run it. Make sure there isn’t a K-cup inside the machine before you start running your brew cycle. Then, start the machine and let the first cycle fill the mug. Once the first cycle is over, empty the mug and start another cycle right away. Keep running cycles until the tank is empty and the “Add Water” light starts blinking. [13]
    • If your Keurig has a touchscreen, the screen will display when it needs more water in order to run.
  4. Your Keurig usually stores some of the descaling solution inside an internal reservoir after you run the cycles. Leave your Keurig alone for at least 30 minutes so the descaler can break apart any residue or buildup inside this reservoir. [14]
    • If you’re using vinegar to descale your Keurig, leave it alone for about 4 hours so it has time to break down the buildup inside.
  5. Watermark wikiHow to Clean a Keurig
    Pour out any leftover solution or liquid into your sink and rinse it underneath warm water. Make sure you rinse the tank thoroughly so there’s no solution or vinegar left inside. Then, fill the tank to the max fill line with clean water and put it back in place on the side of the machine. [15]
  6. Watermark wikiHow to Clean a Keurig
    Set a mug on the drip tray and run a hot water-only cycle through your machine. Once the first cycle is complete, empty the mug and run another cycle immediately after. Keep running cycles until you’ve done it 12 times to clean out all of the descaler solution or vinegar. [16]
    • You may have to fill the water tank at least once to run all of the cycles.
    • Make sure to descale your machine every 3 to 6 months to avoid large buildups. Your machine may also give you a warning when it needs to be descaled. [17]
  7. Advertisement
Method 4
Method 4 of 4:

Replacing the Water Filter

PDF download Download Article
  1. Take the replacement water filter and place it in a bowl of cold water. Let the filter soak for at least 5 minutes before putting it in your Keurig. This helps the filter work better once it’s inside your tank. Replace your water filter every 3 months or every 60 times you fill the tank. [18]
    • Keep in mind that not all Keurig models have water filters.
    • Replace your filter every 3 to 6 months.
  2. You can usually find the filter in the middle or near the back of your Keurig’s water reservoir. Simply pull the tube out from the Keurig and set it on a cloth towel or paper towel to avoid getting water everywhere. [19]
  3. Watermark wikiHow to Clean a Keurig
    Keurig filters consist of a long tube and a mesh piece on the bottom to hold the filter in place. Grab the mesh piece on the bottom and pull it loose to take out the filter. Throw the old filter away once you’ve removed it. [20]
    • Take out the old filter while the new one is soaking. That way, once the new filter is done soaking, you can immediately put it in.
  4. Watermark wikiHow to Clean a Keurig
    Take the new filter out from the bowl of water and rinse it underneath cool water. Rotate the filter in your hands to rinse it completely. Keep the filter underneath the stream of water for at least 1 minute before you put it in the tube. [21]
  5. Watermark wikiHow to Clean a Keurig
    Hold the filter tube upside down and set your filter inside of it. Replace the mesh bottom to secure the filter in place before putting the filter back into your Keurig. Once the filter is replaced, you can immediately start using your Keurig again. [22]
  6. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Why is the machine giving me a small cup when I push large?
    Community Answer
    If you use hard water to brew, the vinegar rinse described above may break down water scale clogging the machine. Otherwise, your exit needle is probably clogged. Prime the keurig to clear it out.
  • Question
    Keurig says you cannot access the internal brewing tank. How do we keep it clean?
    Community Answer
    The vinegar rinse described above cleans it a little by circulating vinegar throughout the whole system. If you haven't used your keurig in a while, run three brew cycles through the machine without a K-cup to rinse out the system with hot water.
  • Question
    What do I do if my Keurig pump keeps running and doesn't stop?
    Community Answer
    Unplug the machine to stop this. Then consider returning the one you have, as this is a design fault and the retailer should either fix it or produce a new one for you.
See more answers
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Warnings

      Advertisement

      About This Article

      Article Summary X

      To clean your Keurig, start by removing the drip tray and K-cup holder. Then, wash both of them using warm, soapy water. Next, take the filter out of the water reservoir, and clean the reservoir and lid with soapy water using a non-abrasive cloth. Make sure to rinse these items thoroughly so no soap remains. Finally, use a paper clip or safety pin to clean out any debris that's stuck in the exit needle. Replace the filter and the water resevoir, then wipe the outside of the Keurig with a damp cloth. Repeat every 3-6 months for best results.For more details on cleaning your Keurig, refer to your manual. Keep reading to learn how to use a vinegar soak to clean your Keurig.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 2,938,646 times.

      Reader Success Stories

      • Judy Weaver

        Jun 26, 2019

        "Got a used machine and was thrilled because I always wanted one. However, it was not brewing a full cup. These ..." more
      Share your story

      Did this article help you?

      Advertisement