How to Clean a Lawn Mower Carburetor

PDF download Download Article
PDF download Download Article

Have you noticed your lawn mower engine having trouble starting, stalling, running rough, or producing black smoke while in use? A dirty carburetor is the likely culprit—but luckily, a quick clean can fix the issue straight away. By removing the carburetor from your mower for a clean, you can usually do a more thorough job. But if the idea of taking apart and reassembling your mower feels intimidating, don't worry, we'll also show you how to clean your carburetor without removing it. We're walking you through both processes step by step—so there’s no need to stress. To learn how you can clean your dirty lawn mower carburetor, read on!

Method 1
Method 1 of 2:

Removing and Cleaning Your Carburetor

PDF download Download Article
  1. If you've used it recently, the inside of your lawn mower could be extremely hot to the touch. To avoid risking a burn, turn your lawn mower off and wait until it's cooled before getting started. [1]
    • Whether you have a push mower or a self-propelled mower, a dirty carburetor can cause a lot of issues. Fortunately, the cleaning process is the same.
  2. Grip the (usually black) plug and pull directly away from the engine. This may require a bit of force but make sure to not pull on the actual cable, just the plug, as you could damage it.
    • This is an extremely important safety step, as with this plug attached the engine is 'live' and could start suddenly with any movement of the blades of the engine or work on the rest of the mower.
    • Even though you won't be working directly on the blades or parts that could cause the engine to start, it's still best practice to remove the cable.
    Advertisement
  3. Your lawn mower’s old oil can be toxic to inhale, so open all of your doors and windows in your workspace. To increase ventilation, set up a garage fan or two as well. [2]
  4. Typically, the fuel line will be a black, rubber cord running from under your gas tank into your carburetor. Gas runs from the fuel line into the carburetor, so to keep from making a huge mess—stop the flow of glass. If your fuel line has a shut-off value, simply turn it. Or, use a vice grip to clamp the fuel line. [3]
    • Note that there will already be a little gas in the fuel line, so you’ll need to catch some gas drips. Lay out a rag or a bowl that you don’t mind getting dirty under the line.
  5. First, locate your throttle cable—typically this will be a long, black cord attached to the carburetor. Next, using a pair of needlenose pliers, carefully wiggle this cord out of its position to remove it. [4]
  6. Find your air filter near the top or side of the engine. Then, remove the outer casing, usually by unscrewing four screws holding it in place using a screwdriver. Then, pull your air filter from its housing. Using a rag or a vacuum cleaner, lift as much dirt and debris from the air filter as possible. [5]
  7. Behind your air filter, you'll see a small, metal piece with a hole in the center and a bowl attached below it. This is the carburetor. You might be able remove it by simply sliding your carburetor off of its mounting bolts. Otherwise, unscrew the screws holding it in place. More remaining gas may spill out at this point, so have a rag or bowl placed underneath you while you remove it. [6]
  8. Typically, just one nut will hold your bowl in place. Unscrew this and clean the bolt thoroughly with carburetor cleaner and a brush, removing all gunk and debris. It’s also extremely important to use a paper clip to clean out the hole found halfway down the side of the bolt. If grass of dirt gets stuck here, it could cause the entire carburetor to stop working. [7]
  9. Now that you’ve unscrewed the one screw holding your bowl in place, remove it from its position. Thoroughly scrub the inside and outside of your bowl with carburetor cleaner. If the carburetor is too dirty to be cleaned by hand, consider replacing your bowl. [8]
    • Finally, inspect the gasket paired with your lawn mower bowl. It might be corroded or broken—in that case, replace it. If it’s a little dirty but can be cleaned, use a rag to remove debris.
  10. With your carburetor now fully removed, clean out small crevices and the outside of the carburetor, removing as much grass and muck as possible. To get off stubborn dirt and debris, use a wire brush . [9]
    • If you notice signs of rust on your carburetor, use sandpaper to remove it.
    • Let your carburetor dry fully before reinstalling it in your machine.
  11. Now that you’ve deep-cleaned your carburetor, resituate all of your pieces in their correct position. First, slide the carburetor back on its mounting bolts. Position the bowl and fasten the bolt that holds it in place. [10]
    • Place the air filter and screw on its outer cover.
    • Reattach the throttle cable.
    • Turn the fuel line’s shut-off valve or remove its clamp.
    • Plug the spark plug cable back into the spark plug.
    12. Advertisement
Method 2
Method 2 of 2:

Cleaning Your Carburetor without Removing It

PDF download Download Article
  1. Before you begin working, double-check that your lawn mower is turned off. If you’ve used your mower recently, allow your hot engine time to cool down to avoid dangerous burns. [11]
    • Whether you have a push mower or a self-propelled mower, you can follow the same cleaning instructions to clean your carburetor.
  2. Grip the (usually black) plug and pull directly away from the engine. This may require a bit of force but make sure to not pull on the actual cable, just the plug, as you could damage it.
    • This is an extremely important safety step, as with this plug attached the engine is 'live' and could start suddenly with any movement of the blades of the engine or work on the rest of the mower.
    • Even though you won't be working directly on the blades or parts that could cause the engine to start, it's still best practice to remove the cable.
  3. First, find your air filter (usually near the top or side of the engine). Next, take off the air filter’s outer case by removing the snaps or unscrewing the screws holding it in place. Then, if your air filter itself is removable, pull it from its housing. Using a rag or a vacuum cleaner, remove the dust and debris from your air filter. [12]
  4. Once you’ve turned on your mower, spray the aerosol liquid in the middle of carburetor for 10-15 pulses. Then, stop spraying and let the mower sit, still turned on, for a minute. Finally, identify the carburetor’s throat and now, spray the aerosol onto this part of the machine as well. [13]
  5. Next, inspect your carburetor. Did you get everything, or do you still spy leftover moss, grass, or grime? Scrub these bits away using a damp rag. Take care not to use a dripping rag—as this could cause your mower to rust. [14]
  6. Typically, this will mean sliding the air filter back into its housing. Then, screw on the bolt or bolts that hold it in position. [15]
    • Plug the spark plug cable back into the spark plug.
    7. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Thing You'll Need

      Removing and Cleaning Your Carburetor

      • Vice grip
      • Needlenose pliers
      • Rag
      • Screwdriver
      • Wire brush
      • Carburetor cleaner

      Cleaning Your Carburetor without Removing It

      • Rag
      • Screwdriver
      • Sandpaper
      • Wire brush
      • Aerosol spray

      You Might Also Like

      Preventing & Cleaning Grass Buildup on a Mower Deck: Best Tips & Tricks
      How to
      Start a Push Lawn Mower
      How to
      Start a John Deere Riding Mower
      How to
      Start a Riding Lawn Mower
      How to
      Change a Lawn Mower Blade
      Sharpen Your Lawn Mower Blade for a Clean, Precise Cut
      How to
      Mulch Leaves with a Lawn Mower
      How to
      Repair a Mower Deck Spindle
      How to
      Dispose of a Lawn Mower
      How to
      Repair a Lawn Mower
      How to
      Remove a Lawn Mower Wheel
      How to
      Use a Riding Lawn Mower
      How to
      Use a ZTR Lawn Mower
      How to
      Change the Blades on a Riding Lawn Mower
      Advertisement

      References

      1. ↑ https://nasdonline.org/918/d000761/mow-your-lawn-safely.html
      2. ↑ https://www.youtube.com/watch?v=nFC9ffOZteA
      3. ↑ https://igoprolawnsupply.com/blogs/iampro-blog/how-to-clean-a-lawn-mower-carburetor
      4. ↑ ​​ https://upgradedhome.com/how-to-clean-a-carburetor-on-a-push-lawnmower/
      5. ↑ https://upgradedhome.com/how-to-clean-a-carburetor-on-a-push-lawnmower/
      6. ↑ https://www.appliancepartspros.com/b/how-to-clean-a-lawnmower-carburetor/
      7. ↑ https://poweredoutdoors.com/clean-a-zero-turn-mower-carburetor/
      8. ↑ https://poweredoutdoors.com/clean-a-zero-turn-mower-carburetor/
      9. ↑ https://www.gardentoolexpert.com/where-to-spray-a-carb-cleaner-on-a-lawnmower-use-these-7-steps/
      1. ↑ https://www.appliancepartspros.com/b/how-to-clean-a-lawnmower-carburetor/
      2. ↑ https://nasdonline.org/918/d000761/mow-your-lawn-safely.html
      3. ↑ https://homesthetics.net/how-to-clean-the-lawn-mower-carburetor-without-removing-it/
      4. ↑ https://homesthetics.net/how-to-clean-the-lawn-mower-carburetor-without-removing-it/
      5. ↑ https://www.gardentoolexpert.com/how-to-clean-a-carburetor-on-a-lawnmower-without-removing-it/
      6. ↑ https://www.gardentoolexpert.com/how-to-clean-a-carburetor-on-a-lawnmower-without-removing-it/

      About This Article

      Thanks to all authors for creating a page that has been read 45,975 times.
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement