PDF download Download Article PDF download Download Article

First time smoking a cigar? Then it's time you learned how to cut one properly. Even if you don't want to smoke a cigar yourself it's useful to know how, in order to cut cigars for people at parties or celebrations.

Method 1
Method 1 of 4:

Straight Cut with Double-Guillotine Cutter

PDF download Download Article
  1. This is the end of the cigar that goes in your mouth and is called the head of a cigar. The opposite end of the cigar is known as the foot. The head is distinguishable by the fact that it has a cap on it, a round piece of tobacco that is stuck onto the head in order to keep the wrapper of the cigar together. [1]
    • The head is also usually easily distinguishable because it's the end closest to the logo sticker wrapped around the cigar.
  2. The shoulder is where the curved end of the cigar starts to straighten out. [2] Right above the shoulder, where the curve is still intact, is where you'll you want to cut. [3]
  3. Line it up so that you're cutting right above the shoulder of the cigar.
    • Remember that it's better to cut too little than too much. You can always go back and cut more cigar off, but it's impossible to go back and put already-cut cigar back on. Better to be safe than sorry.
  4. Keep a tight grip on the cigar with your other hand and try not to let it move until it is cut all the way through. [4]
    • Quickness is key here. You want the guillotine to slice through the cigar quickly, not tear through it slowly.
    • Make sure to grab a sharp cutter. Like a kitchen knife, the sharper your guillotine the better. Unless disaster strikes (it won't), you'll never regret having a sharper implement.
Method 2
Method 2 of 4:

Punch Cut with Punches

PDF download Download Article
  1. A cigar punch just punches a hole through the head of the cigar. [5] There are, however, three different kinds of cigar punches available:
    • Bullet punch: Fits on a keychain, it twists to expose a circular blade that cuts into the head of the cigar.
    • Havana punch: Safer than a bullet punch, it has a recessed tip that can be fitted into the cigar head, and which draws out the tobacco plug after a cut is made.
    • Multi-punch: Offers more sizes for punching different sizes of cigars.
  2. the cut portion will come out as well. [6]
Method 3
Method 3 of 4:

Wedge Cut with V-Cutters

PDF download Download Article
  1. A v-cutter will give the cigar smoker a bigger draw by cutting deeper into the head of the cigar. One drawback of the v-cutter is that it sometimes produces too big of a draw, making the cigar smoke too hot. [2]
    • A very good v-cutter will sit on a table, but is too big to carry with you. A small one is the same size as any other small cutter and can cost as little as $4.00.
    • A v-cutter will not remove too much from the head of the cigar, which can result in the unwrapping of the cigar.
  2. Take care not to wedge the head of the cigar too deep into the v-cutter, or the cut may be too big. [7]
  3. Remove any loose tobacco by tapping the cigar on an ashtray or by blowing lightly into the wedge.
Method 4
Method 4 of 4:

Biting

PDF download Download Article
  1. While this method is often discouraged, it will work in a pinch. [8] Even so, if you have a choice of a straight, punch, or wedge cut, opt for those instead of biting the cap off.
  2. [9]

Expert Q&A

Ask a Question

      Video

      Tips

      • Always select a quality cigar cutter in order to cut cigars properly, and remember, the sharper, the better.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      Warnings

      • Make sure you cut the cap quickly and cleanly in one motion or your cigar may be crushed and end up unusable.
      • Taking off too much of the cap can result in your cigar's wrapper unraveling; taking off too little can cause the draw of the cigar to be much heavier, sometimes resulting in the cigar going out. [10]

      Things You'll Need

      • A double guillotine-style or V-Cutter
      • A cigar

      About This Article

      Article Summary X

      To cut a cigar with a double-guillotine cutter, start by locating the head of the cigar, which is the end that goes into your mouth and has a round cap on it. Then, identify the shoulder, which is where the curved end starts to straighten out. Once you've identified the shoulder, pick up the cigar cutter between the thumb and forefinger of your dominant hand. Next, position the head of the cigar into the cutter and line it up to make a cut right above the shoulder. Keeping a tight grip on the cigar, cut the head quickly and in one fluid motion all the way through. To learn about other techniques and cutting tools, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 476,015 times.

      Reader Success Stories

      • Anonymous

        Jul 3, 2017

        "The simplicity helped. I'm new to the scene and I appreciate those willing to help."
      Share your story

      Did this article help you?