How to Drain & Refill a Hot Water Heater

PDF download Download Article
Empty your gas or electric hot water tank to clear out sediment
PDF download Download Article

It’s best to drain your water heater 3-4 times a year to flush out any sediment that may have built up inside, which can cause it to work less efficiently. Luckily, draining your water heater is a cinch, and all you need is a garden hose and a bucket. We’ll show you how to drain the tank, flush out any sediment, and refill the heater to get it back in working order. We’ll also fill you in on when to drain it so that it’s always running at its best.

Things You Should Know

  • Turn off the cold water valve at the top of the heater, then turn off the heater itself using your fuse box (if it’s electric), or by setting the gas valve to “pilot.”
  • Attach a hose to the drain valve at the bottom of the heater and run the hose into a bucket or out of the house. Then, turn on a hot water tap somewhere in your home.
  • Open the drain valve to let the water in the tank drain completely. Then close the valve and disconnect the hose.
Section 1 of 3:

Draining a Water Heater

PDF download Download Article
  1. First, make sure no water is coming into the tank so that you can fully drain it. Find the cold water valve near the top of the hot water tank, and turn it clockwise to close it. [1] This is often a labeled lever or knob at the top right of the water heater, fixed to a pipe that travels into the top of the tank. [2]
    • If you’re ever unsure of what’s what on your water heater, consult its user manual, look up the make and model online, or call the manufacturer with the number supplied on the water heater’s labeling.
  2. Turning off the power also turns off the heating element inside your water heater, which prevents heating an empty tank. For an electric water heater, find your fuse box or circuit breaker box and check the diagram on the inside of the panel to identify the breaker that controls the power to your water heater. Flip the switch to shut off power to the water heater. [3]
    • For a gas water heater, turn the gas valve on the tank (located near the pilot light) to the “pilot” position, “off,” or its lowest possible temperature setting (whichever is available). The pilot light will not actually go out, but the gas will be cut off from the water heater.
    • Then, allow the water heater to cool for up to 3 hours so you’re not working with dangerously hot water. [4]
    Advertisement
  3. At the base of the water heater is a small valve called the drain valve. Take a standard garden hose and screw the nozzle onto the valve to connect it. Place the other end of the hose into a large bucket or over a floor drain, or run it outside into the yard or garden if your water heater is above-ground.
    • Running your hose outside lets you drain the heater all at once, rather than by the bucketful. If your water heater is in the basement, attach a hose pump to the hose to propel the water up and out. [5]
    • Hose pumps vary in design and operation, so consult your pump’s owner’s manual for hookup and operation instructions.

    Tip: Draining the water into a bucket allows you to examine the water for sediment or other contamination.

  4. Near the drain valve where the hose is connected is a knob or lever that opens and closes the valve. Turn the knob or lever counterclockwise to open up the valve and let the water flow (you may need to use a wrench to open stubborn valves). Make sure it’s opened all of the way to allow for proper drainage. [6] Keep the valve open until no more water runs out, indicating the tank is empty.
    • Also, turn on a hot water tap anywhere in your home to allow air into the tank, helping it drain. Or, open the pressure release valve on your tank to achieve the same effect.
    • If you’re draining the tank with a bucket, fill the bucket, close the valve, empty the bucket, and repeat until no more water pours from the valve.

    Note: Some drain valves require you to use a screwdriver to turn the knob that opens it.

  5. Sediment can collect at the bottom of your water heater, so it’s important that you run fresh water through it to flush it all out. Once the tank is empty, keep the drain valve open and also open the cold water valve at the top for 15 seconds at a time to expel any sediment. Let the tank drain after each burst. [7] Repeat this 5-10 times, or until no more sediment is in the expelled water.
    6. Advertisement
Section 2 of 3:

Refilling the Water Heater

PDF download Download Article
  1. Turn the drain valve (to which the hose is connected) clockwise to close it. Make sure it’s fully closed to prevent any leaks. Then, unscrew the garden hose to disconnect it from the drain valve. [8]
    • Optionally, attach the hose to an outdoor spigot and run water through it to expel any sediment inside the hose.
    • Make sure the cold water valve is closed while you adjust the drain valve and hose.
  2. Find the cold water valve at the top of your water heater and twist it in the opposite direction (counterclockwise) to return water to the tank. You’ll know the tank is full when an open hot water tap in your home runs with a steady stream. Keep the cold water valve open. [9]
  3. If you have an electric water heater, turn the power back on by flipping the breaker that controls the electricity to it. To turn a gas water heater back on, you need to restore the flow of gas into the water heater. Flip the pilot light switch back into the “on” position or to the temperature setting it was dialed to before you turned it off. [10] This is usually around 140 °F (60 °C). [11]
    • If power isn’t immediately restored to the water heater, try flipping the breaker off and back on again.
    • You may need to consult your gas water heater’s owner manual for instructions on how to turn on the heater if it doesn’ have an automatic pilot function.
    4. Advertisement
Section 3 of 3:

When should you drain a water heater?

PDF download Download Article
  1. For regular maintenance, it’s best to drain, flush, and refill your water heater about 4 times a year, or every 3 months. This keeps it clear of sediment and working properly, and helps you catch any issues that may arise, like excess sediment or discolored water. In these cases, call your manufacturer to have the water heater professionally serviced.
  2. If the hot water in your home is slow to get going, the temperature fluctuates, or the water itself is discolored or has a bad odor, it may be that you have sediment in your water heater. Drain, flush, and refill the water heater to expel the sediment. [12] If the problem isn’t solved, call a maintenance worker to have your water heater serviced.
    • Also drain the heater if it makes noise while it’s running, or if your energy bills fluctuate, both of which may indicate that it’s time to flush sediment out of the system.
    3. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Where is the pressure valve located, and how can I open it on the tank?
    Community Answer
    It is typically located on the top or side of the water heater. There should be a pipe connected to it, leading outside or to within six inches if the ground. There is a small lever on it. Be careful when opening it, as hot water can flow from the valve very rapidly.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 16
  • Question
    I have well water. Is it safe to put a gallon of vinegar in the tank for the 3 months maintenance to absorb the lime? Will this keep lime deposit from forming?
    Community Answer
    They won't dilute, and the water will taste like you mixed Caesar salad in it.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 8 Helpful 12
  • Question
    Is it safe to drain water with sediment into the toilet?
    Community Answer
    Yes. The sediment is likely to include a lot of red-brown rust; if the toilet porcelain is old and pitted, some of that color might adhere to the bowl interior. Be prepared to clean that out.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 8
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Reader Videos

      Tips

      • Make sure to refill your electric water heater tank completely before you turn the power back on. If you do not refill the tank after flushing it before turning the power back on, you may severely damage and/or burn out the elements.
        Thanks
        Helpful 0 Not Helpful 0

      Tips from our Readers

      The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
      • I would advise to turn on the hot water at a faucet (vs. the relief valve) to get air into your tank. The safety relief valve is there in case your tank over-pressurizes while in use. You could damage it by opening and closing for routine maintenance.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      You Might Also Like

      How to
      Flush a Water Heater
      How to
      Replace Shut off Valves
      How to
      Turn on a Water Heater
      How to
      Test a Hot Water Heater Element
      How to
      Adjust a Hot Water Heater
      How to
      Turn Up a Hot Water Heater
      A Complete Tankless Water Heater Cleaning and Maintenance Guide
      How to
      Turn off a Water Heater
      How to
      Hide a Water Heater
      How to
      Install a Water Heater
      How to
      Change a Dip Tube
      How to
      Light a Water Heater
      How to
      Remove an Airlock from Your Hot Water System
      How to
      Reset a Water Heater
      Advertisement

      References

      1. ↑ https://myhealth.alberta.ca/Alberta/Pages/Flushing-Your-Water-Heater.aspx
      2. ↑ https://youtu.be/PjwENIksoWE?si=RXOfZMDMdQeuKQ_f&t=25
      3. ↑ https://myhealth.alberta.ca/Alberta/Pages/Flushing-Your-Water-Heater.aspx
      4. ↑ https://www.thisoldhouse.com/plumbing/21016872/draining-flushing-an-electric-water-heater
      5. ↑ https://myhealth.alberta.ca/Alberta/Pages/Flushing-Your-Water-Heater.aspx
      6. ↑ https://www.glwater.org/wp-content/uploads/2018/06/Water-Heater-Flushing_080316.pdf
      7. ↑ https://www.glwater.org/wp-content/uploads/2018/06/Water-Heater-Flushing_080316.pdf
      8. ↑ https://www.glwater.org/wp-content/uploads/2018/06/Water-Heater-Flushing_080316.pdf
      9. ↑ https://myhealth.alberta.ca/Alberta/Pages/Flushing-Your-Water-Heater.aspx
      1. ↑ https://www.glwater.org/wp-content/uploads/2018/06/Water-Heater-Flushing_080316.pdf
      2. ↑ https://www.dcwater.com/sites/default/files/DrainingWaterHeater.pdf
      3. ↑ https://www.thisoldhouse.com/plumbing/21016872/draining-flushing-an-electric-water-heater

      About This Article

      Article Summary X

      To drain a water heater, start by turning it off and let the water cool for a few hours. Once the water in the heater has cooled, turn the cold water intake valve off and run some hot water from a faucet in your house to empty out excess water in the pipes. Then, open the pressure relief valve on the tank and connect a long garden hose to the drain valve. If your heater is above ground, just let the water drain out of the tank and through the hose to an outdoor location. If your heater is below ground, use a pump to pump the water up through the hose. If you want to learn more, like how to flush your water heater, keep reading the article!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 241,994 times.

      Reader Success Stories

      • Richard Dene

        Apr 6, 2018

        "How much water to drain out of tank."
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement