PDF download Download Article PDF download Download Article

No matter where you live, a hard rain can turn your yard into a mess of mud and water puddles that won’t dry. Wet yards happen for a number of reasons but usually stem from poor soil and drainage systems. To dry out the water, check your yard to find the source of the problem. For small, individual patches of moisture, dry your yard by leveling out the soil and possibly planting water-resistant plants. For large-scale problems, look into getting a drainage system like a French drain [1] or dry well. [2] With the proper treatment, you won’t need to worry about water runoff causing damage to your home.

Part 1
Part 1 of 3:

Fixing Small Patches of Moisture

PDF download Download Article
  1. Pick up any noticeable rocks, sticks, and other loose material where the water tends to pool in your yard. To fix these areas, you will also need to get rid of all plants there, including grass. If you plan on saving these plants, dig carefully around them in a circle until you reach the bottom of their roots, then pry them out of the ground with a spade. [3]
    • If you don’t plan on saving the plants, you don’t have to be as cautious with them. You could cut larger plants to make them easier to remove. However, consider digging down to remove weed roots whole.
    • To remove sod, dig around the area using a spade, then use the spade to divide the sod into strips about 1 ft (0.30 m) wide. Pry up the edges of the strips to sever the roots, then roll them up by hand.
  2. Use a spade or another tool to make a hole about 6 in (15 cm) deep. The hole can be as wide as you need, so dig out the entire problem area. Remove all of the soil in the wet spot, setting it aside on dry ground nearby or in a wheelbarrow. [4]
    • If the soil is dry, rent a rototiller from a nearby home improvement store. Push it over the trouble spots to turn up the soil.
    • If large parts of your yard are wet, you are better off rototilling the entire yard or installing a drainage system. Fill in small spots that are uneven or easy to dig up by hand.
    Advertisement
  3. Select a quality topsoil with a balanced amount of clay and sand. Then, get some construction-grade sand. Mix together 2 parts sand, 2 parts topsoil and 1 part compost. Then, combine the mixture with the original soil at the bottom of the hole. If your soil doesn’t absorb water very well, adding sand and compost can help loosen it. [5]
    • Mix the soil together using a spade or rototiller. When you’re done, fill in the rest of the hole as needed with more soil.
  4. If the problematic spots were lower than the rest of your yard, filling in and flattening them often leads to better absorption. Slope the land as needed to force water to flow toward better drainage areas. A slope of about 2% is generally steep enough to force water away from the rest of your yard. Gradually change the slope by moving the soil around and raking it flat. [6]
    • A slope of 2% means the elevation of the soil changes by about 1 4  in (0.64 cm) over 12 in (30 cm) in distance. A steeper slope more easily redirects excess water.
    • Measure the slope of an area by planting stakes and running a string between them.
    • Dig soil from higher areas to move to lower ones. You may need to work on the rest of your yard as well to form an effective slope.
  5. Get a tamper, which is a flat piece of metal that pushes soil down to compact it and level it out. Press down on the exposed soil until it blends in with the rest of your yard. Make sure it looks flat or forms a smooth slope capable of absorbing and redirecting water. [7]
    • Watering the lawn will also help compact the soil mixture. Use the moisture to check how well the sand and compost help solve the drainage issue.
  6. Sod and grass seeds are some of the best ways to fix swampy areas in a yard. If you just finished amending an area with new topsoil, complete it with a fresh covering. Try unrolling sod over the bare area. If you’re filling in a grassy yard, spread grass seeds and rake them into the soil. [8]
    • Consider covering fresh grass seeds with a 1 4  in (0.64 cm) layer of topsoil followed by an equal layer of straw to protect them from birds.
    • If you’re looking for something different, get some moisture-resistant plants like ferns, phlox, violets, arrowwood, and elderberry. These plants can help dry out your yard even if the soil composition and grade aren’t a problem.
  7. Advertisement
Part 2
Part 2 of 3:

Eliminating Widespread Moisture Problems

PDF download Download Article
  1. Use an organic compost like leaf mulch, grass clippings, or even bark. If you have grass, spread the compost into a 1 2  in (1.3 cm)-thick layer. Rake it into the soil at least once a year, either in late fall or early spring. The organic material opens up the soil for better drainage while also promoting the growth of water-absorbing plants. [9]
    • As long as you don’t add too much compost, it won’t cover up grass and other existing plants in your yard. Many wet spots are already barren, so they will stay barren until you grow something, such as sod or grass.
    • You may need to wait a couple of seasons to see any change in the soil. The organic material needs time to break down and mix into the yard.
    • If your yard is in bad shape, consider renting a rototiller to mix compost about 10 in (25 cm) deep into the soil. Doing this will destroy a lawn but have a much more immediate effect on drainage.
    • Consider mixing sand or peat moss into the soil as well if you plan on rototilling the entire yard. It helps drain water from poor, clay-heavy soil.
  2. Make a French drain if you need to draw water away from the yard. [10] [11] A French drain isn’t as fancy as it sounds. It is little more than a perforated pipe in the ground. To start, dig a trench about 2 ft (0.61 m) wide and at least 6 ft (1.8 m) in your yard. Then, line the trench with landscape paper before, then set the pipe on top of it. Cover it with gravel, followed by topsoil to hide it. [12]
    • When the drainage pipe works correctly, water seeps through the fabric. The pipe then carries excess moisture away to a lower part of your yard.
    • The French pipe works best when it spans from the wet areas in your yard toward drainage spots like a storm drain or swale. A swale is a shallow ditch that may contain a drainage outlet.
    • Check online or at a home improvement store for a French drainage pipe. If you can’t find one, make one by poking plastic holes in a regular pipe.
  3. Construct a dry well to direct rainwater near buildings. For a dry well, you need to dig a hole about 10 ft (120 in) from the nearest drain or downspout in the wet portion of your yard. Fit it with a plastic dry well tank, then line the tank with landscape paper. Next, run a PVC pipe from the drainage pipe or downspout to the tank. Fill in the remaining space with gravel. [13]
    • Landscape paper releases water while preventing gravel from getting into the tank. It enables the tank to store water and gradually release it so your yard doesn’t get too wet.
    • Shop online or at local home improvement stores for the supplies you need.
  4. A cistern is very similar to a dry well, but it is usually used to redirect rainwater back into your home. Have a contractor dig a hole in your yard and then place the tank in it. The tank is usually made of material like concrete and cinder blocks. The water then can be rerouted to your home through PVC pipes fitted to the tank’s valve and pump.
    • Another option is to get an above-ground cistern, which is just a big barrel to store water collected from smaller rain barrels.
    • A cistern is a great way to save money by repurposing rainwater. Use it wherever you don’t need clean drinking water, such as for laundry, toilets, or watering plants.
  5. Since you can’t stop heavy rainfall, let a garden handle the problem. You will need to remove existing plants and debris before shaping the soil into a raised area with a small ridge around it. Make sure your yard slopes toward the rain garden so excess water reaches the plants. Then, fill the garden with various moisture-tolerant plants. [14]
    • Keep hardy plants in the high-moisture areas, usually at the lowest points of the garden. Some options include goldenrod, elderberry, swamp rose, and blue vervain.
    • Place less moisture-tolerant plants in the other parts of the garden. Try using sage, daylilies, and lavender, among others.
    • Since changing a yard’s grade can get expensive, gardens are usually paired with systems like plastic drainage pipes or rock channels. Look into installing a French drain or swale.
  6. Advertisement
Part 3
Part 3 of 3:

Finding the Cause of Moisture Damage

PDF download Download Article
  1. Note how the water moves across your yard during the storm. Then, take a walk around your yard right after a solid day of rain. Look for mud and standing puddles that don’t dry out within a day. Find out if the problem happens in small, separate patches or one large area. [15]
    • Water is supposed to move downhill, away from your home, and into a drainage outlet. If you see standing puddles or water flowing back toward your home, then the yard’s slope could be to blame.
    • Individual spots are much easier to treat by filling them in, amending the soil, or growing absorbent plants.
  2. Search for leaks [16] or other possible causes for the moisture buildup. Check the downspout coming off your roof as well as any nearby utility pipes. Leaky pipes sometimes cause small patches of moisture, including near buildings. Another possibility is that you have a natural spring that lets water come up to the surface. [17]
    • If you suspect a leak, try turning off your home’s water supply to see if your water meter continues to increase. For leaky municipal lines outside your home, test the water for chlorine and other treatment chemicals.
    • Springs often occur in hilly areas with clay soil. If you have one, consider preserving it. You could also drain it using a French pipe or another method.
  3. Clay soil absorbs water, which eventually turns into puddles. To perform a test, fill a mason jar full of soil from the problem area. Fill the jar up with water, then wait for the components to separate. Sand sinks to the bottom, followed by a layer of silt, then clay. [18]
    • Mark the level of sand after 1 minute, then mark the silt level after 2 hours. Mark the clay level after the water in the jar clears to begin measuring the proportion of each component in the soil.
    • Another way to test absorption is by digging a hole 1 ft (0.30 m) deep and 4 in (10 cm) wide. Fill it with water to see how quickly it drains. If it takes more than 4 hours the second time, then amend the soil with sand and compost. [19]
    • If your soil isn’t at the right composition, amend it by mixing in sand and compost.
  4. Aerate the soil to see if it can absorb water. Compaction is a very common problem in areas with lots of clay or foot traffic. If your yard can’t seem to retain water and you notice brown or thinning plants, get a core aerator [20] or a gardening fork. While the soil is moist, use one of the tools to poke 3 in (7.6 cm) holes in the ground, spacing them about 3 in (7.6 cm) apart. Let your yard air out while you look for other causes behind the water problem.
    • You can rent an aerator from most home improvement centers. An aerator is a machine that removes a plug of soil. The air that enters the holes loosens the soil to make it more absorbent.
  5. If you know your home is in a region that has a lot of bedrock or high groundwater, you won’t be able to fix the issue without assistance. Call up the nearest extension office or your local government's conservation department. Let them look up a regional survey map or come out to test the soil. Then, wait for them to give you advice or refer you to a qualified contractor. [21]
    • Another common problem in some parts of the world is marshland. You may not be able to drain marshland without government clearance first. It can also be tough to drain completely.
    • Usually, you need to either build a rain garden or install wells and drains to deal with these issues.
  6. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Tips

      • When draining your yard, make sure you don’t direct water to your neighbor’s property unless you’re prepared to deal with the consequences. Drain it safely into a storm drain or downhill spot.
      • If you live near a hill, look out for water coming down the slope. A valley or drainage outlet at the bottom of the hill can help direct water away from your home.
      • Gravel is great for making soil more resistant to water, but keep in mind that it doesn’t break down as fast as organic material like compost. It is better for filling in areas where you never want water, such as near your home.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Before doing any sort of construction or installation on your property, check your city’s regulations. You may need to apply for a building permit at city hall.
      Advertisement

      Things You’ll Need

      Finding the Cause of Moisture Damage

      • Mason jar
      • Water
      • Aerator

      Fixing Small Patches of Moisture

      • Spade or shovel
      • Topsoil
      • Sand
      • Compost
      • Rake
      • Tamper
      • Grass or other absorbent plants

      Eliminating Widespread Moisture Problems

      • Spade or shovel
      • Rototiller
      • Compost
      • Landscape paper
      • French drain pipe (optional)
      • Dry well (optional)
      • Cistern (optional)
      • Rain garden plants (optional)

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about gardening, check out our in-depth interview with Tony Hoang .

      About This Article

      Thanks to all authors for creating a page that has been read 152,002 times.

      Did this article help you?

      Advertisement