11 Reasons Your Dryer Isn't Starting & How to Fix Them

A user-friendly guide to troubleshooting your clothes dryer

Co-authored by Egor Shevtsov and Nicole Levine, MFA

Last Updated: December 19, 2024 Fact Checked

Having a dryer in your home can save you time and hassle, but what if it suddenly stops working? If your dryer doesn’t start when you press the start or power button, don't panic—there are some simple troubleshooting steps you can take to identify the problem. You may even be able to fix your dryer yourself without paying for costly estimates and repairs! This wikiHow article will cover the most common reasons why your dryer won't start and provide you with simple fixes you can do at home.

Get Product Support Solve Any Problem

Hi there! Do you have a question about how to use or repair your home appliance? I’ve read the manuals so you don’t have to. Select your product, brand, and model, then ask away!

*

1

The dryer door isn't closed.

Download Article

If the door isn't latched, the dryer will not start. If you have a front-load dryer, make sure there aren't any clothes hanging out of the drum. If clothes prevent the door from making contact with the door switch, the dryer will not get the signal that the door is closed.

2

It might start differently than you expect.

Download Article

Instead of quickly pressing the Start button, hold it down for several seconds. On some dryers, you'll need to press a Power button and select a cycle before the Start button will turn the dryer on.

3

Child lock or control lock is on.

Download Article

Some dryers with have a control lock or child lock option. These two locked modes are common on dryers that have digital control panels, including many Samsung and Whirlpool dryers. ^{[1]
X
Research source} When either mode is on, you typically won't be able to open the dryer door, and pressing buttons on the control panel won't make the dryer start.
- Check the control panel for a padlock, key, or baby icon, or the word "Lock." If you see one, turn off the locking mechanism.
- The combination of buttons to press varies by model, so you'll need to check your manual for specific instructions.

4

The cycle may be set incorrectly.

Download Article

Some dryers have advanced features like "Automatic mode" that affect how and when the dryer starts. ^{[2]
X
Research source} Try putting your dryer into a different drying mode, such as a normal timed cycle, to see if that fixes the problem.

5

It's not plugged in (or there's an outlet problem).

Download Article

Check the plug to make sure it hasn't come loose. You'll also want to inspect the plug visually to make sure it isn't damaged. The outlet your dryer is connected to must be 240 volts—if the outlet doesn't have enough power, the dryer may not turn on at all. ^{[3]
X
Research source}
- If your dryer has a light inside the drum, open the door to see if the light turns on. If the light is turning on, your dryer has power.
- If you get power to your dryer, but not correct voltage, parts of dryer may work, and other parts won't. There may be a problem with your dryer power outlet.
- It's possible that your dryer outlet isn't receiving the correct power because a breaker may have tripped , or there could be a larger electrical problem.

6

A breaker has tripped.

Download Article

Head over to your circuit box to check the breakers. While gas dryers only have one circuit breaker, electric dryers have two. If the dryer won't start at all, or if your electric dryer starts but doesn't produce heat, one of the two breakers may have tripped.
- At the breaker box, look for breakers labeled "dryer" or "laundry" and see if they're off. If so, flip them back on.
- Also, check nearby power outlets for a GFCI reset button . If the GFCI turned off power due to a ground fault, it may have turned off your dryer's outlet. Press the Reset button on the outlet to see if that resolves the problem. If the dryer turns back on, consider calling an electrician to investigate issues with the outlet and your wiring. ^{[4]
  X
  Trustworthy Source
  US Occupational Safety and Health Administration
  U.S. government agency responsible for setting and enforcing workplace safety standards
  Go to source}

7

The door switch is broken.

Download Article

Look at the switch inside the dryer's door. When you close the dryer door, the door switch tells the dryer that the dryer is closed and safe to operate. If the door switch is broken, misaligned, stuck, or burned out, the dryer won't start.
- First, visually inspect the switch to look for damage. It's usually a metal tab that hangs down at the top-right corner of your front-load dryer, but it looks more like a button on top-load dryers.
- Press the switch to see if it clicks into place. If the switch feels loose or doesn't click, you'll need a new door switch.
- Even if the door switch on your dryer seems mechanically sound, its internal circuit may have blown. If you feel comfortable opening your dryer and using a multimeter, you can test the switch for continuity .
- Before you get started, unplug the dryer, and turn off the gas valve if you have a gas dryer.
- Check your dryer's manual for instructions on removing the switch.
- Once removed, place one probe on one of the door switch's terminals and the other probe on the second terminal.
- If you hear a beep, the door switch has continuity. If there is no beep, you'll need to replace the switch.

8

The start switch is faulty.

Download Article

The button you press to turn on the dryer may not be working. If you have a push-to-start dryer, such as those controlled by a dial, the switch may have shorted out. This would prevent the dryer's motor from receiving the signal that you've tried to start the dryer.
- If you feel comfortable removing the panel from your dryer and using a multimeter, you can test the terminals on the start switch for continuity, similarly to how you'd test the door switch.
- Always unplug your dryer (and disconnect the gas, if needed) before working on it.
- The start switch is right where you think it is—beneath the button you press to start the dryer. You'll need to remove the panel to access the switch behind it.
- Once you remove the switch, place one probe on one of its terminals, and the other probe on the second terminal.
- If you hear a beep, the start switch has continuity. If there is no beep, you'll need to replace the switch.

9

The belt has worn down or broken.

Download Article

If the dryer powers on but doesn't rotate, check the belt. Your dryer's belt, which is just a piece of rubber that wraps around the drum, connects the motor to the drum. If the belt is loose, worn down, or has broken completely, you will need to replace the belt .
- If you feel comfortable doing so, you can visually inspect the belt by opening your dryer. Before opening it, disconnect the dryer from power (and gas, if you have a gas dryer).
- Check your dryer's manual for specific instructions on opening the unit. For a front-load dryer, you'll need to remove the top to locate the belt. For a top-load dryer, you'll be able to see the belt once you remove the front panel.
- If you can see the drum but don't see a belt, it has snapped or slipped off. A replacement is needed. If you do see a belt and it's loose, purchase a replacement belt.

10

The thermal fuse is blown.

Download Article

If the thermal fuse stops working, your dryer will usually not turn on. Some dryers may still turn on with a blown thermal fuse but not produce heat. If you feel comfortable opening your dryer and using a multimeter, you can test the fuse for continuity . If the thermal fuse has blown, you can buy a replacement part and insert it yourself without much hassle.
- Find the location of your thermal fuse using your dryer's manual. If you don't have the manual, you'll typically find it on the manufacturer's website.
- Unplug the dryer. If you have a gas dryer, disconnect the gas supply.
- Remove the thermal fuse.
- With your multimeter in continuity mode, place one probe on one of the fuse's terminals, and the other on the second terminal.
- If you hear a beep, the fuse has continuity. If there is no beep, the fuse must be replaced.
- Note: Many times a dryer thermal fuse blows because it's a sign of your dryer overheating. This can be due to a ventilation problem. While replacing the thermal fuse can be a quick fix, you want to have a professional appliance technician investigate the root cause of why your thermal fuse went bad in the first place to avoid further dryer damage, and a possible fire hazard due to a venting problem.

11

The circuit board or motor needs to be replaced.

Download Article

If you have your dryer's manual and feel comfortable doing so, you can open up the dryer and inspect the circuit board for burn marks or shorts. However, if the circuit board or motor no longer works, replacing it may not be worthwhile, depending on the age of your dryer. If your dryer is still under warranty, you can call the manufacturer (or the store, if you have a store warranty) to request a repair—you may not have to pay at all! Otherwise, you can contact an appliance repair shop for additional troubleshooting and advice.

Community Q&A

Search

Add New Question

Question

The timing lights flash off and on, and the dryer won't start.

Justin

Community Answer

There are many variables that could cause your lights to power on and your dryer not to start. If you are not comfortable testing the unit and its components yourself, contact an appliance technician to diagnose the problem and resolve the issue for you.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 12

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Keep your dryer on a raised platform to ensure a longer life for your dryer belt. ^{[5]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
If the thermal fuse has blown, it may have done so because your dryer vent needs to be cleaned. Clean your dryer vent at least once a year, and clean the lint filter before or after each load.

Thanks
Helpful 1 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

[1]

[2]

[3]

[4]

Trustworthy Source

Go to source

[5]

Log in

11 Reasons Your Dryer Isn't Starting & How to Fix Them

Steps

Get Product Support Solve Any Problem

The dryer door isn't closed.

It might start differently than you expect.

Child lock or control lock is on.

The cycle may be set incorrectly.

It's not plugged in (or there's an outlet problem).

A breaker has tripped.

The door switch is broken.

The start switch is faulty.

The belt has worn down or broken.

The thermal fuse is blown.

The circuit board or motor needs to be replaced.

Community Q&A

Video

Tips

You Might Also Like

References

About This Article

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories