Download Article
Download Article
Rubber bands were made to be fired. Well, okay, maybe they were made to "hold stuff in place," but come on. It's just too tempting. If you've got an itch to fling a rubber band into your sibling's backside, you can learn to fire a rubber band using your hand and other objects, as well as how to make yourself a rubber band firing mechanism that will have all the others jealous. Have fun and be careful. This may also work with hair ties.
Steps
-
Fire the rubber band off your index finger. The easiest way to fire a rubber band off your finger is by hooking it on the tip of your index finger, pulling it back and lettin' it rip. To fire the band off your index finger:
- Place the rubber band on the tip of your index finger, pointing your finger where you want the rubber band to go.
- Pull the rubber band back with your other hand, past your raised thumb.
- Let go of the rubber band to let it fire, or hook the rubber band onto your thumb.
- If you hook it onto your thumb, move your thumb forward and let it slip off to fire.
-
Fire the rubber band off your thumb. Firing rubber bands off your thumb is a good way of making sure that the band won't catch and snap against the back of your hand when you're firing. You can also get a lot of power out of it. To fire a rubber band off your thumb:
- Hook the rubber band around the tip of your thumb, pointing your thumb in the direction you want the rubber band to go.
- Point the tip of your thumb forward so it will slip off the end of your thumb easily.
- Grab the other end of the rubber band with your other hand, pulling it back as far as it will go.
- Release the rubber band with your other hand to let it fire.
Advertisement -
Use your index finger like a slingshot. One creative way of firing a rubber band involves using your index finger to create a pivot, from which you can pull the band back and release it with your other fingers. To fire a rubber band this way:
- Place your hand with your palm facing up.
- Hook each end of the rubber band around your middle finger and thumb.
- Use your index finger to stretch the rubber band forward a few inches, pointing it in the direction you want the band to travel, and pulling it tight.
- Let the rubber band slip off your middle finger and thumb simultaneously to release it.
-
Make your hand into a gun. The most-complicated, but also most-classic way of firing a rubber band is by shaping your hand into a gun and wrapping the band around to really let it fly. To fire a rubber band this way:
- Make your hand into a gun shape, with your thumb as the hammer and your finger as the barrel. Point your index finger in the direction you want the rubber band to go.
- Hook the rubber band around your pinkie, pulling it back toward the inside of your wrist.
- Hook the rubber band all the way around your thumb.
- Secure it on the very tip of your pointer finger.
- To release the rubber band, let go with your pinkie.
Advertisement
-
Fling it from your pen. Tired of the rubber band catching the back of your hand and leaving you with a welt? Get your hand out of the way! Hook a rubber band on the tip of your pen or pencil, pull it back and let it fly. For the best possible accuracy, point the tip of the pen in the direction you want the rubber band to go.
-
Use what you've got. If you want to get creative, use rulers, the corners of books, and other objects to fling your rubber band. Think outside the box. The tip of your glue bottle? Perfect rubber band launcher. The head of a WWE wrestling action figure? Now you're thinking.
- Ideally, you want to use something firm enough to stay steady when you pull the rubber band back on it, but you could also experiment with bendable objects if you want. See what works.
-
Use the rubber band to launch other things. The rubber band works just as well as a launcher as it does a launchee. Use the rubber band to launch:
- Wads of paper
- Paperclips
- Skittles and other candy
-
Don’t aim hard objects at anyone’s face. Bummer alert: Be very careful any time you fire rubber bands or other things and make sure that you don't aim them at anyone's face. It's better not to aim rubber bands at someone at all, especially if you're in class. Firing things around the classroom in general can get you into a lot of trouble with the teacher, so be careful.
Advertisement
-
Find a solid stick, preferably with a curve. If you want to build a simple rubber band gun, you'll need to find a great stick to do it. The best sticks will be hefty and gun-shaped, with a slight curve that you can hold like a handle. So, look around for a good stick about 6–8 inches (15.2–20.3 cm) long in total, and about an inch wide, if possible. If it looks gun-shaped, you've got a good one.
-
Sand the wood down. Get an adult to help you, if necessary, to remove the bark and other junk from the outside of the wood. Whittle it away so you've got the clean wood underneath and spend some time sanding it down with some sandpaper. If you're going to go to the trouble to make a gun, you might as well make it look awesome.
-
Glue a clothes pin on the top of the “gun.” To fire the rubber band, you'll want to glue a rubber band to the top of the "barrel" of the gun, preferably right where you'll be able to activate it with your thumb while you're holding it. To attach the clothes pin:
- Set the clothes pin on the side, so the flat side of the pinchers will be flat against the top of the barrel.
- Use wood glue to run a long line of glue along that side of the clothes pin.
- Secure it in place and hold it while the glue dries.
-
Cut a notch into the front tip. Again, get an adult to help you, and use a knife to cut a small notch in the front of the barrel of the gun, big enough to seat the rubber band in firmly.
-
Hook a rubber band between the notch and the clothes pin. To fire the gun, you'll hook the rubber band on the front of the barrel, then catch it in the clothes pin on the top of the gun. When you're ready to fire, aim the gun where you want it to go, and push the top lever on the clothes pin down. The rubber band should come loose and go flying.
- While it might be cool to paint your rubber band gun, you need to be extremely careful to make sure it doesn't look like a real-enough gun to get you into trouble. The last thing you need is someone to call the cops about a kid running around with a gun. Have fun, but be safe. [1] X Research source [2] X Research source
Advertisement
Community Q&A
Search
-
QuestionWhen I tried, the rubber band went sideways. How do I make it go straight?Community AnswerRe-read the instructions in the article. Aim carefully, and make sure you don't let the rubber band get out of your range.
-
QuestionWould a hair tie work?Grey ClassifiedCommunity AnswerYes, but there would be less power, as hair ties typically are smaller and have less possible tension.
-
QuestionAre rubber bands necessary?Community AnswerNo, you could use something similar. However, rubber bands work the best.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- The more you pull back, the longer it will go.Thanks
- Use your two fingers in firing so it is semiautomatic.Thanks
- Try not to have one too big or too small.Thanks
Tips from our Readers
The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.
- Make sure the band is close to the tip of your finger where the pad of the finger flattens, or the rubber band could snap at your cuticle.
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement
Warnings
- If it falls off your index finger, it will come back and sting you.Thanks
- Do not aim directly at people or animals.Thanks
Advertisement
Things You'll Need
- Rubber band
References
About This Article
Article Summary
X
To fire a rubber band, try using your index finger. Just hook the rubber band around the tip of your index finger, pull it back with your other hand, and let it fly. You can also use your index finger like a slingshot. Place your hand with your palm facing up, and hook each end of the rubber band around your middle finger and thumb. Use your index finger to stretch the rubber band forward a few inches, pointing it in the direction you want to shoot it. Then, let the band slip off your middle finger and thumb at the same time to release it. Another way to fire a rubber band is to fling it off your pen. Hook the band on the tip of your pen, pull it back, and let go. You can also fire a rubber band off of rulers, sticks, or glue bottles. To learn how to make a rubber band gun, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 269,889 times.
Reader Success Stories
- "My students shoot rubber bands for Potential & Kinetic energy. We use rulers to pull back to 10cm, 20cm, &30cm (potential energy) then measure how far they fly. Makes for easy data gathering. Glad you make sure for safety to wear goggles/ glasses." ..." more
Advertisement
82%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"My students shoot rubber bands for Potential & Kinetic energy. We use rulers to pull back to 10cm, 20cm, &30cm (potential energy) then measure how far they fly. Makes for easy data gathering. Glad you make sure for safety to wear goggles/ glasses."
..."
more
"I absolutely loved it. But I have found a gun one a little hard I just can't seem to keep the position but I bet if I practice more I will do it!"
..."
more
"I finally got revenge on my most hated enemy and he didn't find out it was me!"
"Thanks for teaching the gun version! Very helpful!"
"It slingshotted very fast and long. Great article."
