Troubleshooting steps for when Windows doesn't recognize your iPod
Is your computer not recognizing when you connect an iPod? Problems with the Apple Mobile Device Driver can cause Windows to have trouble recognizing your iPod. This is easily fixable, though. Read on for a list of troubleshooting steps that can solve the problem.
Getting Windows to Detect Your iPod
- Connect your iPod to your computer using a different USB cable, or try a different USB port.
- Make sure the iPod is charged.
- Make sure iTunes or Windows is updated to the latest version.
- If basic troubleshooting steps don’t work, you might need to fix your Apple Device Driver .
Steps
Section 2 of 4:
Troubleshooting the Apple Mobile Device Driver
-
Connect the iPod to the computer. Plug the USB cable that you use to charge the iPod into one of the USB ports on the computer. [4] X Research source
- If an alert box appears on your iPod or computer saying “Trust This Computer”, choose “Yes”.
- Make sure that the USB cable is firmly plugged into both the iPod and the computer.
-
Open the Device Manager. Press the Win key and enter “Device Manager." Select Device Manager from the results.
- Alternatively, press Win + X and select Device Manager .
-
Expand the “Universal Serial Bus Controllers” section. Click the arrow next to the list item to expand. This is located at the bottom of the list, and you should see “Apple Mobile Device Driver” displayed in the expanded list. [5] X Research source
- If you do not see Apple Mobile Device Driver listed here, try disconnecting and reconnecting your iPod. If you still do not see it, check for an “Apple” device listed in “Imaging Devices” or “Portable Devices” and proceed to the manual update steps .
-
Examine any icons displayed on “Apple Mobile Device Driver”. You may see a down arrow, an exclamation/question mark, or no icon at all.
- If you see a down arrow icon, right-click the Apple Mobile Device Driver and select Enable .
- If you see an exclamation/question mark, proceed to the manual update steps .
- If you see no icon, then try restarting the Apple Mobile Device Service .
Advertisement
Section 3 of 4:
Updating the Apple Mobile Device Driver
-
1Right-click “Apple Mobile Device Driver” and select Update Driver . You can continue from the previous section to find this in Device Manager under "Universal Serial Bus controllers."
-
2Select Browse my computer for drivers . This will take you to another page with more options.
-
Click Let me pick from a list of available drivers on my computer . This is located at the bottom of the page and will take you to a new page with browsing options.
-
Click Have Disk . This is located in the lower right, just below the list of hardware.
-
Click Browse . This is located in the bottom right corner of the “Browse” pop-up window.
-
Navigate to your iTunes “Drivers” folder. The most common filepath for this is: “C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers”.
- On newer 64-bit operating systems, the likely filepath is “C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers”.
-
Select the file named "usbaapl" (“usbaapl64” if running a 64-bit version of Windows). Once selected, click Open to return to the “Have Disk” page with the full filepath displayed.
- If you do not see the file listed here, then you may be in the wrong folder location. Double-check your filepath.
-
Install the driver software. Click Next , then Finish as prompted. Windows will now install/update the driver.
-
Open iTunes. Once the download is complete, your device will appear in iTunes.
- If you still do not see your device, try restarting the Apple Mobile Device Service .
Advertisement
Section 4 of 4:
Restarting the Apple Mobile Device Service
-
Close iTunes. Click the red X in the upper right corner.
-
Disconnect your device from the computer. If you still have the device manager open, the listing for the Apple Mobile Device Driver will disappear.
-
Press ⊞ Win + R . This will open up the Windows “Run” command.
- Alternatively, press Win + X and select Run.
-
Enter services.msc and click OK . This will open up the Windows Services console.
-
Right-click Apple Mobile Device Services and select Properties . All services appear on the right in descending alphabetical order.
-
Select the dropdown menu next to “Startup Type” and choose Automatic . This menu is located about halfway down the “General” tab.
-
Click Stop . This button is located below the dropdown menu. After a moment, the Service Status will display “Stopped."
-
Click Start . This button is located to the left of “Stop." After a moment, the Service Status will display “Running."
- Click OK to save your settings and close the window.
-
Restart your computer. This ensures that your changes will take effect.
-
Connect your device to the computer. Once booted into the OS, connecting the device will launch iTunes automatically and appear listed in the software. [6] X Research source
- You may need to launch iTunes manually, but the device should still successfully appear listed among your devices in iTunes.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Reinstalling iTunes may also repair issues with the Apple Mobile Device Support software. iTunes and Apple Mobile Device Support are displayed separately in the “Programs and Features” section of the Control Panel. Uninstall both and restart your computer before installing a fresh version of iTunes.Thanks
- These steps should work for similar issues with iPhones and iPads as well.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
References
About This Article
Thanks to all authors for creating a page that has been read 155,060 times.
Advertisement