PDF download Download Article PDF download Download Article

A mirror on your bedroom or closet door saves space and is a convenient way to check out your outfit. We'll show you how to hang one.

Method 1
Method 1 of 3:

Determining the Positioning

PDF download Download Article
  1. Look in the mirror while holding it to make sure you can see all the parts of yourself that are important to you. Remember that you’ll likely be able to step back from the mirror to see your shoes. [1]
    • Choose a door that gets good light if you plan to do your make up in the mirror.
    • If possible, have a friend hold the mirror, so you can double check that the height works for you.
  2. Holding the mirror in place, create a small pencil mark along the top edge. This will give you a reference point to work from as you center the mirror on the door. [2]
    • It’s not important to mark the edges of the mirror. This mark is just to get an approximate feel for where you’d like to hang the mirror.
    Advertisement
  3. Use a measuring tape to measure the width of the door from edge to edge. Divide that number in half to get the precise center of the door’s width. On your height line, mark this true center of the door with a dark pencil mark. [3]
    • If your door has decorative imprints or panels, measure only the center of the thick, central panel of the door. Decorative areas of interior doors are often hollow and not strong enough to hold a mirror.
  4. Measure the width of the mirror using a measuring tape. Divide this measurement in half to get the precise center of the mirror. Create a light pencil mark at this measurement on the top of the mirror. [4]
    • If there’s not a rough edge to mark the center of the mirror, use a small piece of painter’s tape to mark the center.
  5. Ask your friend to align the center mark on your mirror and the center mark on your door’s height line. With the mirror in this ideal position, mark the center of the bottom edge of the mirror. [5]
    • You will use this bottom mark as a guide to hang mirror clips, which will secure your mirror to the door.
  6. Advertisement
Method 2
Method 2 of 3:

Mounting the Mirror on the Door

PDF download Download Article
  1. Space these clips evenly from the center point of the mirror you marked while remaining only in the thick, center panel of the door (if it has panels). Screw these halfway in. [6]
    • Do not set the screws wider than the width of your mirror. Your mirror will be most secure with these bottom screws at least 1 inch (2.5 cm) from the corner of the mirror on each side.
    • If necessary, rotate the plastic face of the clip up so it is facing the top edge of the door. It will be prone to spinning until you place the mirror in the groove, since it is only half screwed in.
    • You can buy mirror clips at your local hardware or home improvement store.
  2. Slide the bottom edge of the mirror down into the groove of the 2 plastic clips you’ve half screwed into the door. Doing this will support the weight of the mirror from the bottom, but your friend will need to hold the top of the mirror against the door to keep it from falling. [7]
    • If you have trouble fitting the bottom edge of the mirror into the groove, unscrew the bottom clips slightly to create more room.
  3. About halfway up the mirror, mark 1 point on each side of the mirror at the same height. They appear like a matched pair. While your friend holds the mirror in place, screw a plastic mirror clip into each point to fully secure the sides of the mirror to the door. [8]
    • The plastic face of the clip should rest against the front side of the mirror. It will hold the weight of the mirror, and your friend should be able to let go.
    • If positioning your side clips halfway up the mirror would mean screwing them into a decorative portion of the door, adjust your clips up or down as a pair. Screw them into the solid center of the door so they can adequately support the weight of the mirror. It’s okay if your side clips are a third or two-thirds of the way down the door, for example. It won’t affect their weight-bearing capabilities.
  4. Tighten all the clips so they are holding the mirror firmly against the door. Have your friend let go of the mirror. [9]
  5. Use two more plastic mirror clips to attach the top edge of your mirror to the door. Space these clips evenly from the center point of the mirror you marked at the beginning when measuring. Screw these only into the thick, center panel of the door (if it is decorative). [10]
    • Place these top mirror clips no closer to the mirror’s corners than 1 inch (2.5 cm).
    • That’s it! Your mirror is screwed in and ready to go.
  6. Advertisement
Method 3
Method 3 of 3:

Choosing and Hanging an Over-the-Door Mirror

PDF download Download Article
  1. Open and close a few potential doors for your mirror to see which close without any resistance. A hook will add width to your door and make an already snug fit even tighter. [11]
    • If you have to press hard on a door to close it, that door is not a good candidate for an over-the-door mirror.
  2. [12] Choose thin, flat hooks that closely mimic the shape of your door’s top edge. The more closely your hooks fit the door, the less they will rub and discolor your door frame. [13]
  3. To help your over-the-door mirror appear mounted, choose a mirror whose frame and hooks match your door. For a high-contrast look, choose a frame and hook color that pop against the color of your door. [14]
    • There is no right color for a mirror frame, just pick the look that appeals to you most.
  4. When you’re ready to hang the mirror, open the door wide. Remove any packaging on the mirror, which could potentially scratch the door.
  5. Holding the sides of the mirror with your hands, lift the mirror up and place the hooks gently over the door. Depending on how tightly the hooks fit your door, you may need to open the mouths of them slightly so they can slip over the top.
  6. Let go of your mirror once it is over the door. To center the mirror, slide the hooks gently in the direction you’d like to move it. You’re now ready to use the mirror for all your dressing needs.
  7. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How can I hang a mirror on a door without damaging it?
    Angelica Savard
    Home Stager, Realtor, & Interior Designer
    Angelica Savard is a Home Stager, Realtor, and Interior Designer based in Long Beach, California. She is also the Co-owner of Elegant Domain Interiors LLC, a business that offers design consulting, home staging, and window treatments. She has over 15 years of interior design and consulting experience. She earned a BA from California State University Long Beach with an emphasis on Interior Architectural Design.
    Home Stager, Realtor, & Interior Designer
    Expert Answer
    If you choose to hang a mirror on your door, make sure you're using the proper hanging hardware so you don't damage the door. Otherwise, it may be best to choose a different spot for the mirror.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Thanks for submitting a tip for review!

      Things You'll Need

      • Door
      • Mirror
      • A friend
      • Screwdriver or drill
      • 6 plastic mirror clips
      • Pencil
      • Level
      • Measuring tape

      About This Article

      Article Summary X

      To hang a door mirror, hold the mirror at the height you want it on the door and mark where the top of the mirror hits. Next, measure the width of the door, divide that number in half to get the precise center of the door, and mark the center on the height line with a pencil. Then, measure the width of the mirror, divide the measurement in half to find the center of the mirror, and lightly mark the top of the mirror. Finally, use a level and mirror clips to mount the mirror using your measurements. For tips on properly installing the mirror clips, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 133,253 times.

      Did this article help you?

      Advertisement