Download Article
Download Article
Concrete pavers can be a beautiful addition to your landscape. They are incredibly strong and durable, making them the ideal solution for your driveway, walkway, patio, steps, or decorative elements around your home. Laying concrete pavers requires you to follow specific steps but before you begin, consider drawing out your design plan or using a free software do so. This will create a visual blueprint for you to follow.
Steps
Download Article
-
Mark the area. Use twine and sticks to mark the area where you will be laying your pavers and use it as a guide during the process.
-
Excavate the soil. You will need to excavate 8 to 9 inches and then firmly compact the soil. Be sure to measure once done so that your patio, driveway, or walkway does not accidentally slope in any one direction.Advertisement
-
Lay the base. Your pavers should not be placed directly onto the soil. Instead, they must be placed on top of a gravel base. High-quality, Class 2 Road Base is preferred for this type of project, and you will need enough to be 4 to 6 in (10 to 15 cm) deep throughout the entire area. If the concrete pavers are only being used for foot traffic, you can get by with a base that is only 3 to 4 in (7.6 to 10.2 cm) deep.
-
Place the drainage system. If the area is prone to flooding, you may want to install a drainage system to ensure that the area remains free of standing water. There are several types of solutions you can use with the objective being to direct water away from the area using pipes or gravity.
-
Compact the base. This is a critical step for ensuring that your pavers remain secure and do not shift over time. The base must be firm and secure.
-
Lay bedding sand. Placed on top of the gravel base, bedding sand provides a smooth surface for your concrete pavers to be placed on. The sand needs to be 1 inch thick and perfectly leveled, the sand provides a gap and allows the pavers to be compacted.
-
Place concrete paving stones. Use your drawing or rendering as a reference and begin laying your concrete pavers in the correct pattern. Begin with the interior pavers, placing them firmly onto the base and compacting them as you go. Next, lay your border pavers using the same technique.
-
Compact and set pavers. Once all of your pavers have been placed, apply pressure to set each stone to ensure that it is firmly secured to your sand base.
-
Add polymeric sand. This sand is preferred as the finishing touch to your concrete pavers installation. It is poured in between each paving stone and will serve to prevent weeds from growing in between the pavers, along with reducing the presence of unwanted insects.
-
Clean the area. Sweep away any loose sand or debris from your paving stones prior to washing them with water.
-
Seal your paving stones. To prolong the life of your pavers, apply a paver sealer on an annual or bi-annual basis.
Advertisement
What Are Best Practices For Installing Pavers?
Expert Q&A
Search
-
QuestionHow do you cut concrete pavers?Tony Hoang is a Landscaper and the Principal at H&J Landscaping & Concrete Contractor in Newark, CA. With over six years of experience, he specializes in designing the perfect concrete driveways & backyard patios for homes. H&J Landscaping & Concrete Contractor is a 4.5-star business on Yelp.Use a standard circular saw or angle grinder with a diamond blade specifically designed for cutting masonry and stone. This will help prevent the blade from becoming blunt too quickly. It's also a good idea to set the paver on a non-slip mat before beginning to cut, which keeps the paver in place during cutting and prevents any accidents.
-
QuestionCan I install over existing concrete?Community AnswerYep, it's done all of the time. But, pavers can be very uneven, so, you typically install them over a layer of sand or stone dust in order to get the tops flat and not have trip hazards and wobbly furniture. However, since you're usually above the surrounding grade, you'll want to soldier the perimeter to avoid pavers moving off of the concrete.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
- For additional security and stability, the border of your pavers can be set in concrete to lock them in place.Thanks
- Some soil types require a geo-textile layer to be installed before the gravel base. It can be difficult to determine whether or not this is necessary, so it is recommended that you consult with a professional concrete pavers installer.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- The gravel base must be compacted correctly, or you could risk your pavers shifting out of position due to future settling or movement within the base itself. This is one of the more challenging aspects of laying pavers and why many people choose to work with a professional.Thanks
Advertisement
About This Article
Thanks to all authors for creating a page that has been read 51,120 times.
Advertisement
100%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
