How to Insulate a Drop Ceiling

PDF download Download Article
PDF download Download Article

Suspended ceilings, also called "drop ceilings" or "dropped ceilings," are a popular choice for office spaces and residential basements. They are inexpensive, easy, and quick to install, and they require little maintenance. They also offer plenty of air space above the tiles for utility lines. The best way to insulate a drop ceiling is to install batt insulation between the ceiling joists before installing the hanging grid; this installation would proceed as any insulation installation. If you are seeking to add insulation to a suspended ceiling that is already in place, however, you will have to rest the batt insulation on top of the ceiling tiles. [1]

Steps

PDF download Download Article
  1. Although batt insulation is fairly lightweight, it can put an undue amount of stress on flimsy drop ceiling tiles and break them.
    • If you have fiberglass tiles, you'll need to replace them before proceeding. Fiberglass ceiling tiles cannot support the weight of insulation.
    • If you have the more common wood-and-gypsum ceiling tiles, they will need to be at least 5/8 inch (15 mm) thick to be used safely with batt insulation.
  2. Because you'll be adding additional weight to the ceiling grid, you will need to install additional hanger wires to support it.
    • Aim to install an additional hanger wire between each existing pair of wires. This will double the total number of wires supporting each beam.
    • Remember that the hanger wires should only be secured into the wood joists. If you ran your grid beams parallel to the ceiling joists this will not pose a challenge.
    Advertisement
  3. Either paper-backed or foil-backed insulation will suffice; both types of this insulation are readily available at home improvement stores.
    • Measure the distance of your grid from the joists to determine the depth of batting you should buy; most drop ceilings will accommodate up to 8" (20 cm) batts. [2]
    • To determine the total amount of batt insulation you need to buy, simply calculate the area of the suspended ceiling (width multiplied by depth in a rectangular room).
  4. Beginning on 1 end of the room, push all of the tiles in the first row up into the ceiling and slide them over. Do not take them completely down from the ceiling grid, as this makes them difficult to reinstall once the insulation is in place.
  5. Begin working the strip of batt insulation above the ceiling grid and into the row you are working on, keeping the backing faced down. Sit the insulation flush against the hanger wires so that there won't be any air space between neighboring strips of batting. [3]
    • You may find it helpful to temporarily remove the cross tees of the ceiling grid while you get the insulation into place.
  6. After each section of batting is in place, reach underneath it and grab the ceiling tiles you moved aside. Gently pull them back into place so that the insulation rests on top. Repeat this process for each remaining row of tiles.
    7. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What about simply blowing in insulation (either cellulose or fiberglass) over the drop ceiling tiles?
    Community Answer
    Not a good idea either. Blown-in insulation begins to settle between 14-30 days after installation. When it settles, it will put all of its weight on the middle of the tiles it's installed over. Your chance of bending/warping tiles will be very high. On top of this, you will have a very high possibility of having fiberglass/cellulose particles enter the air of the space below the drop ceiling. To top it off, if you ever have to replace tiles or do work to any conduit or pipes above the ceiling, you will have a mountain of insulation come out whenever a tile is broken/removed.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 3 Helpful 10
  • Question
    Is it ok to put in insulation without backing when insulating above ceiling tiles?
    Community Answer
    No, it is not a good idea as it is very possible that some of the fibers may fall into the living space. Without the backing, the possibility is higher.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 4 Helpful 5
  • Question
    Why is the insulating material facing down?
    Community Answer
    Foil is a vapor barrier to keep moisture from condensing in the insulation. It should always face the living space.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 9
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you would prefer ecologically sound alternatives to fiberglass batt insulation, you can often find batting made from recycled denim, sheep's wool, and other sustainable materials.
        Thanks
        Helpful 6 Not Helpful 2
      • If any of the panels in your drop ceiling have light fixtures in them, cut the insulation so that it remains about 3 inches (8 cm) away from the fixture.
        Thanks
        Helpful 3 Not Helpful 4
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Never handle fiberglass batting without wearing protective gloves, a dust mask, and safety glasses. Stray fibers from the insulation can be a major irritant to skin, eyes, and mucus membranes.
        Thanks
        Helpful 4 Not Helpful 1
      • Do not attempt to spray foam insulation above the suspended ceiling tiles. This will make it nearly impossible to remove any of the tiles in the future.
        Thanks
        Helpful 4 Not Helpful 4
      Advertisement

      Things You'll Need

      • Hanger wires
      • Electric drill
      • Wire cutters
      • Tape measure
      • Fiberglass batt insulation
      • Scissors or knife
      • Chair or stepladder
      • Gloves
      • Dust mask
      • Safety glasses

      You Might Also Like

      How to
      Install a Drop Ceiling
      How to
      Install Ceiling Drywall
      How to
      Hang a Hook from a Ceiling
      How to
      Fix Holes in a Ceiling
      How to
      Hang Lights from a Ceiling
      How to
      Fix Ceiling Cracks
      How to
      Cut and Fit Coving Molding
      How to
      Fix a Leaking Ceiling
      How to
      Hang Heavy Objects from the Ceiling
      How to
      Soundproof a Wall or Ceiling
      How to
      Raise a Ceiling
      How to
      Texture a Ceiling
      How to
      Popcorn Your Ceiling
      How to
      Wrap Beams
      Advertisement

      References

      1. ↑ https://www.nrcan.gc.ca/energy-efficiency/energy-efficiency-homes/make-your-home-more-energy-efficient/keeping-heat/keeping-heat-chapter-5-roofs-and-attics/15637#a5-4
      2. ↑ https://www.bunnings.com.au/diy-advice/home-improvement/heating-and-cooling/how-to-insulate-a-ceiling
      3. ↑ https://www.bunnings.com.au/diy-advice/home-improvement/heating-and-cooling/how-to-insulate-a-ceiling

      About This Article

      Thanks to all authors for creating a page that has been read 142,412 times.

      Did this article help you?

      Advertisement