How to Level the Ground for Pavers

PDF download Download Article
PDF download Download Article

Available at most home improvement and supply stores, pavers are small, specialty stones that can transform any yard or garden into a work of art. Like all outdoor decor, pavers require some preparation to install properly, especially when it comes to making sure your ground is level. Though it may seem daunting at first, knowing the ins-and-outs of the process will help you tackle your paver project with poise.

Part 1
Part 1 of 3:

Marking the Area

PDF download Download Article
  1. Before breaking any ground, make sure to contact your local utility organizations to see if there are any pipes or wires below the area you want to dig. In the United States, this can be done by calling 811. [1] Other country-specific Dial Before You Dig hotlines and websites include:
    • Australia: Call 1100.
    • Canada: Visit Enbridge.com.
    • Ireland: Visit beforeUdig.ie.
    • United Kingdom: Call 0800 0853 865.
  2. Use measuring tape to find the length and width of the area you will be working in. Multiply these two numbers together to find the square area of the location. For safety, add about 6 to 8 inches (15 to 20 cm) of space around the entire perimeter of your spot before measuring.
    Advertisement
  3. Use a measuring tape to find the length and width of one patio paver. Multiply these two numbers together to find the square foot or square meter value of each segment. Divide the area of your plot by this number to find out how many pavers you will need. [2]
    • If your pavers are designed to lock together, measure them when they are connected. To make calculations easier, treat each combined segment as one paver.
  4. Use a small amount of brightly-colored spray paint or string to help you visualize your work area. If using paint, spray it around the perimeter to create an outline. If using string, run it along the outside of the work area and use small stakes to secure it to the ground. [3]
    • Spray the stakes with brightly-colored spray paint so you don't accidentally trip over them.
  5. Place small stakes around the perimeter of the marked spot. [4] Tie white string between the stakes, creating lines across the plot of land. Adjust each stake until the strings rest at the height each paver will sit at once the project is complete.
    • You can also rent a rotating laser level and transit rod to measure the grade with.
  6. After they have been leveled according to where your pavers will sit, angle your string so that it slopes down by about .25 inches (0.64 cm) for every 1 foot (30 cm) of land. You can do this by taking the length of the plot, finding the corresponding slope angle, and lowering your stakes nearest the yard or street down by the appropriate amount. If possible, angle your slope away from your house or building and toward lower ground. [5]
    • If you plan on leaving space between pavers, sloping the strings may not be necessary.
    • Avoid driving the stakes into the ground over any utility lines.
    7. Advertisement
Part 2
Part 2 of 3:

Digging Up the Land

PDF download Download Article
  1. The amount of base materials necessary depends largely on the project in question. [6] However, in most cases, you will need about 6 inches (15 cm) of gravel for patios, yards, and other small projects. If necessary, consult a local landscaper or home center employee for advice based on your local climate and conditions.
  2. Add the amount of gravel you need to the measured height of one paver. Then, add an extra 3 inches (7.6 cm) to your measurement to accommodate sand. [7] This number indicates the distance you will need to create between the bottom of your pit and the strings above. [8]
  3. Use a shovel or rototiller to dig up the marked spot. Make sure to remove ground from the entire area, using the flat side of your tool to smooth the walls around the edges. [9] If the strings are getting in your way, mark their positions on the stakes using tape and remove them temporarily.
    • Make sure you have somewhere to put all the dug up soil before you start digging.
  4. To see if you’ve dug deep enough, use a measuring tape to find the distance between the bottom of the pit and the strings up top. Make sure to take measurements from multiple areas, including the center and corners, to ensure that the entire pit is even. If necessary, keep digging or fill in low spots.
    • If you removed them while digging, reattach your strings before taking measurements.
    5. Advertisement
Part 3
Part 3 of 3:

Adding Gravel, Edge Restraints, and Sand

PDF download Download Article
  1. [10] Pour your gravel or other crushed rock into the excavated pit. After every 2 inches (5.1 cm), use a hand tamper or mechanical plate compactor to compress the layer into a fine, solid base. Add gravel until you are about 3 inches (7.6 cm) from the slope line, or the depth of one paver added to the 1 to 1.5 inches (2.5 to 3.8 cm) of space necessary to accommodate your sand. [11]
  2. Edge restraints are small, long walls made of plastic, aluminum, steel, or precast concrete, and they are essential to making sure your pavers don’t move after you put them down. If your stones are regularly shaped, simply place your restraints around the perimeter of the excavated pit and secure them using nails or yard spikes. If your stones are irregularly shaped, you may need to cut the edges first using a jigsaw. [12]
    • Keep in mind that you may need to adjust the edge restraints after you install the pavers.
  3. For an extra defense against weeds, put down a layer of landscape fabric between the gravel and sand. This fabric prevents light from reaching the bottom layer of soil, making it harder for weeds to grow. Though it can be placed before the layer of gravel instead, laying it down after prevents sand from sifting into the cracks. [13]
  4. [14] Pour a layer of coarse sand into the pit, filling it between 2 to 3 inches (5.1 to 7.6 cm) deep. Avoid fine sand and combination mixes cut with limestone or stone dust. The sand will help the pavers lock together, making sure they set properly. After pouring, use a measuring tape to make sure the distance between the top of the sand and your slope line equals the height of one paver. [15]
    • You can also lay a pipe that's the same thickness as the pavers on the sand to make sure the distance between the sand and slope lines is accurate.
  5. [16] After all your materials have been added, slowly pull a hoe, screed board, or similar tool over the sand to make sure the top layer is entirely smooth with no bumps or waves. If necessary, place a level on the sand to test whether or not everything is flat. Once this step is complete, you will be ready to add the pavers.
    6. Advertisement

Why Is It Important To Seal Pavers?


Expert Q&A

Search
Add New Question
  • Question
    Can you lay pavers directly on dirt?
    Scott Johnson
    Landscape & Design Consultant
    Scott Johnson is the Owner and Lead Design Consultant for Concrete Creations, Inc., an award-winning landscape and design company based in the San Diego, California metro area. He has over 30 years of experience in the pool and landscape construction industry and specializes in large estate outdoor environment construction projects. His work has been featured in San Diego Home & Garden Magazine and on Pool Kings TV Show. He earned a BS degree in Construction Management with an emphasis in Architecture and CAD design from Northern Arizona University.
    Scott Johnson
    Landscape & Design Consultant
    Expert Answer
    This really isn't a good idea. You need a layer of road base on top of the soil and a layer of sand on top of the road base. This will keep the pavers level over time. You typically need at least 3-4 inches of material underneath the pavers.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 20 Helpful 73
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Level Ground
      How to
      Level Dirt
      Berms: What They Are and How to Add One to Your Landscaping
      How to
      Dig a Hole
      Everything You Need to Know about Mailbox Installation
      How to
      Build a Tunnel
      How to
      Level the Ground for a Shed
      How to
      Level Your Yard
      How to
      Close in an Unwanted In Ground Pool
      How to
      Make a Trench
      How to
      Prevent Sinkholes
      How to
      Excavate a Trench
      Advertisement

      Expert Interview

      Thanks for reading our article! If you'd like to learn more about ground levelling, check out our in-depth interview with Tony Hoang .

      References

      1. ↑ https://call811.com/
      2. ↑ https://www.skillsyouneed.com/num/area.html
      3. ↑ Tony Hoang. Landscaping Manager. Expert Interview. 1 November 2022.
      4. ↑ Tony Hoang. Landscaping Manager. Expert Interview. 1 November 2022.
      5. ↑ http://extension.oregonstate.edu/marion/sites/default/files/how_to_install_pavers.pdf
      6. ↑ Tony Hoang. Landscaping Manager. Expert Interview. 1 November 2022.
      7. ↑ Tony Hoang. Landscaping Manager. Expert Interview. 1 November 2022.
      8. ↑ http://extension.oregonstate.edu/marion/sites/default/files/how_to_install_pavers.pdf
      9. ↑ Scott Johnson. Landscape & Design Consultant. Expert Interview. 8 April 2020.
      1. ↑ Tony Hoang. Landscaping Manager. Expert Interview. 1 November 2022.
      2. ↑ Scott Johnson. Landscape & Design Consultant. Expert Interview. 8 April 2020.
      3. ↑ http://extension.oregonstate.edu/marion/sites/default/files/how_to_install_pavers.pdf
      4. ↑ https://www.familyhandyman.com/patio/how-to-cover-a-concrete-patio-with-pavers/view-all/
      5. ↑ Tony Hoang. Landscaping Manager. Expert Interview. 1 November 2022.
      6. ↑ Scott Johnson. Landscape & Design Consultant. Expert Interview. 8 April 2020.
      7. ↑ Tony Hoang. Landscaping Manager. Expert Interview. 1 November 2022.

      About This Article

      Article Summary X

      To level the ground for pavers, start by calling your local utility organization to see if there are any underground pipes or wires you'll need to avoid while digging. Once you've found a good spot to add your pavers, measure it so you know how many pavers you'll need. Then, calculate how deep you'll need to dig and use string to mark the finished level for your pavers. Using a shovel or rototiller, dig up the entire area so it's deep enough and add a base layer of gravel until you're about 3 inches from the slope line. To prevent your pavers from moving around, install edge restraints around the perimeter. Finally, add a layer of bedding sand, and place your pavers on top. For more advice from our co-author, like how to use landscape fabric to level the ground for pavers, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 469,908 times.

      Reader Success Stories

      • B. Kerr

        Jun 28, 2018

        "Confirmed sand can be installed either above or below the weed barrier."
      Share your story

      Did this article help you?

      Advertisement