PDF download Download Article PDF download Download Article

Knee-ripped jeans were a staple of grunge fashion back in the early 1990s. Twenty years later in 2011, ripped jeans came back in style full force, and these days many women and men wear ripped or distressed jeans in the grunge style. If you are wondering how to make the ripped knees, you won't have to wait two years for your jeans to rip and fray by themselves. This article will teach you how to create the look in just a few hours.

Part 1
Part 1 of 4:

Preparing the Jeans

PDF download Download Article
  1. The jeans should be 100% cotton, as other fabrics won't work the same. They should be baggy, straight, or boot-cut in order to make a true 90s look, but they can be any color. [1]
    • Prepare your tools at the same time. These can be found below, under the Things You'll Need.
  2. The most common shapes used to make slits are diamonds, circles, or rectangles. If you're not sure, start with a diamond shape, which tends to turn out well. [2]
    Advertisement
  3. Then use a ruler, and mark out two slits in the middle of the leg, going crossways across the knee area.
    • To look like true-90s style ripped knees, the slits should go across the knee, stopping 2 centimeter (0.79 in) from the seam on both sides; if you want the rip to be smaller, then mark it 4 centimeter (1.6 in) from the seam.
  4. Mark two more, slightly shorter slits a ruler-width (or so) from each of the first slits, moving away from the center of the knee. These slits should be about 2 centimeter (0.8 in) shorter than the first.
    • Then again, make two more slits each a ruler-width each from the top and bottom, again making them about 2 centimeter (0.8 in) shorter than the previous ones. Repeat until your last slits are only 1 centimeter (0.39 in) or so long.
  5. Advertisement
Part 2
Part 2 of 4:

Cutting the Slits

PDF download Download Article
  1. Poke into the center of the markings of the slit, so the scissors will get into it with greater ease. [3]
  2. Do the same on all the other slits.
  3. Advertisement
Part 3
Part 3 of 4:

Distressing the Jeans

PDF download Download Article
  1. This will prevent any damage to the backs of the knees as you distress the jeans. [4]
  2. Using your hands is possible too but takes much longer. [5]
    • If the tweezers cannot pull white threads out after more than five to seven white threads on each side (2cm away from the slits), turn the jeans right side out and use a razor to distress the edges until you see white threads.
    • If you get two to four threads left after pulling without using a razor, if the slits are small as 1 centimeter (0.39 in), you can pull the blue threads using your hands.
  3. If you cannot get them out, pull the white threads to get the blue threads out, since the blue threads may be stuck inside the white threads. Then you can pull the blue threads out very easily on the top of those edges.
  4. Advertisement
Part 4
Part 4 of 4:

Adding Finishing Touches

PDF download Download Article
  1. Cut very gently, to make it appear more worn.
  2. Use tweezers, and distress the blue ends from the white threads where it looks square, to lessen the square effect. [6]
  3. If you have done everything correctly, then congratulations, you can wear your new ripped jeans outside! Wash then dry the jeans before wearing, to make those white threads to look fluffier.
  4. Advertisement

Community Q&A

Search
Add New Question
  • Question
    Where can I buy/get blue denim jeans to do this?
    Community Answer
    You can get jeans at pretty much any clothing store, but since you're going to be cutting them up, I'd suggest you check out thrift stores so you're not spending too much money.
  • Question
    Can I make knee-ripped jeans of skinny jeans?
    Community Answer
    Yes. In the new trends, ripped-knee jeans looks better on skinny rather than total raw denim jeans.
  • Question
    If ripped jeans in general will fray in the wash, would hand stitching will help slow the process at all?
    Community Answer
    If you have or can borrow a machine, you can zigzag stitch right on the edges, which should help prevent fraying. You could also try stitching around the edge with a loop technique of some kind.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      • If you want to add more distressed parts, without ripping, you can do that by cutting small slits 1 centimeter (0.39 in) from both slits, and distress them with tweezers by pulling the blue vertical threads.
      • If you want to add paint drips, you can.
      • If you want to prevent your jeans from fraying, sew in a piece of the cloth the same color as the jeans are, around the area.
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Do not wear the jeans while distressing, because it can cause injury to your knee.
      • If you forget to use cardboard, you may cut right through to the other side of your jeans, so be careful.
      Advertisement

      Things You'll Need

      • Ruler or measuring tape
      • Len
      • Cardboard
      • Scissors
      • Razor blade
      • Tweezers
      • Small knife, or a needle
      • Sandpaper



      Expert Interview

      Thanks for reading our article! If you’d like to learn more about sewing, check out our in-depth interview with Shaelynn Haning .

      About This Article

      Thanks to all authors for creating a page that has been read 115,783 times.

      Reader Success Stories

      • Hailey Moore

        Apr 9, 2023

        "Thanks to this article I was able to make more of my jeans ripped rather than plain. I absolutely love ripped ..." more
      Share your story

      Did this article help you?

      Advertisement