PDF download Download Article PDF download Download Article

Making proper right turns, left turns, and U-turns just takes practice. When making turns, always remember to turn on your blinker, reduce your speed, and check for oncoming traffic and pedestrians. When making U-turns, make sure to check for road signs to see if they are allowed.

Method 1
Method 1 of 3:

Making a Right Turn

PDF download Download Article
  1. Turn it on 100 feet (30 meters) or one whole city block before the turn. As you approach the turn, drive closer to the right side of the street. This will signal to cars that you are preparing to turn ahead. [1]
  2. Do this by placing your foot on the brake pedal. As you reduce your speed, glance at your rear view and right-hand mirror to see if the cars behind you are slowing down. [2]
    • If you notice that the cars behind you are not slowing down, tap your break pedal a couple times to signal that you are braking.
    Advertisement
  3. Do this by looking into your right-hand mirror and by looking back over your right shoulder. Once your path is clear, make the right turn by turning your steering wheel to the right. [3]
    EXPERT TIP

    Simon Miyerov

    Driving Instructor
    Simon Miyerov is the President and Driving Instructor for Drive Rite Academy, a driving academy based out of New York City. Simon has over 8 years of driving instruction experience. His mission is to ensure the safety of everyday drivers and continue to make New York a safer and efficient driving environment.
    Simon Miyerov
    Driving Instructor

    Our Expert Agrees: The most important thing you have to do when you're making a U-turn is to look everywhere—look to your left, behind you, and over your right shoulder before the turn, and check your rearview mirror as you complete the turn.

  4. Not the left lane if you are turning into a two-lane street. Try to make your turn as tight as possible without hitting the curb. In other words, do not make a wide, sweeping turn. Making wide turns may cause you to go into the lanes of oncoming traffic. [4]
    • Do not make a right turn from a left lane.
  5. Advertisement
Method 2
Method 2 of 3:

Turning Left

PDF download Download Article
  1. You want to do this because left turns aren’t always allowed. If you see a sign saying that a left turn is illegal, then keep driving until you can make a legal left turn. [5]
    • For example, some traffic lights and intersections prohibit left turns.
  2. Do this at least 100 feet (30 meters) before the actual turn. As you approach the turn, reduce your speed to 10 to 15 miles per hour (16 to 24 kph) by pressing the break pedal. Get as close to the centerline or median as possible. [6]
    • Use the center left lane if one is available to make your left turn.
    • Do not attempt to make a left turn from a right lane.
  3. As you are yielding, keep your wheels straight by holding your steering wheel straight. If your wheels are slightly turned to the left while waiting, you may be shoved into oncoming traffic if a car hits you from behind. [7]
  4. As a rule of thumb, do not turn if oncoming vehicles are less than 200 feet (60 meters) away from you. Once the lanes are clear, you may turn into either the left or right-hand lane if you are turning into a two-lane street. [8]
    • If you are turning into a single-lane street, make sure to not cut the corner of the oncoming traffic’s lane. In other words, do not make your left turn too tight.
  5. Advertisement
Method 3
Method 3 of 3:

Making a U-Turn

PDF download Download Article
  1. You may make U-turns only if you are crossing a double yellow line, there is a “U-turn Only” sign, you are in a residential area, and if you are in the far left lane and no sign is prohibiting U-turns. [9]
    • You may also make a U-turn on a divided highway if there is an opening in the center divider and the opening is not reserved for law enforcement or emergency vehicles.
  2. Once you approach your turn, get as close to the centerline of the road as possible and come to a complete stop. Observe the traffic and check for oncoming vehicles and motorcycles, as well as pedestrians and bicycles. [10]
    • Oncoming vehicles must be more than 200 feet (60 meters) away before making a U-turn.
    • Do not make a U-turn from the right lane.
  3. Do this to prepare for the U-turn. Once the lanes are clear, slightly accelerate and let the steering wheel correct itself to a straight position. Then turn into the left lane. [11]
    • Do not turn into the far right lane.
  4. U-turns are prohibited when there is a “No U-turn” sign, you are on a one-way street, and when you cannot see 200 feet (60 meters) in either direction (because of hills, curves, rain, snow, fog, and other obstacles). [12]
    • Additionally, do not make U-turns on highways that are split by curbs, two sets of double yellow lines, and other dividing mechanisms.
  5. Advertisement

Community Q&A

Search
Add New Question
  • Question
    How do I use the brake and the gas pedal when I am turning?
    Community Answer
    When preparing to turn, put your foot on the brake. Ease off the brake and press the gas pedal lightly as you begin to turn. Merge into the flow of traffic as quickly as possible.
  • Question
    Is it against the law to not signal when making turns or changing lanes?
    Community Answer
    It depends on which state you are residing in. Check your state's driving guidelines. However, as a general rule of thumb, you should always turn on your blinker when turning.
  • Question
    How do I turn without being close to the curb or almost running into the other car?
    Community Answer
    If you're going to make a turn, drive until the curb is in line with the side of your car. Once you've done that, you can start to steer around making your turn.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Article Summary X

      To make a right turn, start by putting your blinker on about 100 feet before the turn and driving slightly closer to the right side of the street. As you approach the turn, reduce your speed to 10 to 15 miles per hour and check your mirrors for pedestrians, cyclists, or other vehicles that might be in your path. Finally, take the turn as tight as possible to avoid going into the left lane. For left turns, make sure to come to a complete stop before turning, as you need to yield to oncoming traffic. While you wait, keep your wheels straight, or you may get pushed into oncoming traffic if someone hits you from behind. Once the oncoming lanes are clear, take the turn. For more help, like how to make a U turn, read on.

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 407,036 times.

      Reader Success Stories

      • Anonymous

        Aug 9, 2017

        "I struggled with left turns until I read this. Thanks. "
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement