How to Make a Cement Mixer

PDF download Download Article
PDF download Download Article

Cement mixers are a useful addition to any workman's toolbox. Making your own can be a much easier and cheaper than just buying one outright. In this article, we'll guide you through the whole process from start to finish. Keep reading to learn how to make a cement mixer!

1

Gather your tools.

PDF download Download Article
    2. Advertisement
2

Make the three in-the-drum paddles.

PDF download Download Article
  1. If you can't find that, cut the blades from 18-gauge sheet metal. Bend the blades and drill 2 1/4" holes in each section. Dig identical holes in the tub and secure them with 1/4" bolts.
3

Apply bondo liberally to the bottom and sides.

PDF download Download Article
    2. Advertisement
4

Thread the pieces together to form the frame.

PDF download Download Article
  1. Tee fit and fasten it with a nut. Then, attach the main wheels as well.
5

Mark and drill the cotter pin holes close to the disks.

PDF download Download Article
  1. Then, put on the wheels and washers. Mark and drill the cotter pin holes as close as possible to the disks, to prevent the shaft from having excessive end play and wobble.
    2. Advertisement
6

Grease the axle and secure the assembly with 2 cotter pins.

PDF download Download Article
  1. Grease the pipe to slip the conduit over that, and lubricate the assembly yet again.
7

Slide the tub over the shaft.

PDF download Download Article
    2. Advertisement
8

Attach handles and paint the assembly (if desired).

PDF download Download Article
  1. You can use a set of bicycle grips for the handles.

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Use Prepackaged Concrete Mix
      How to
      Mix Cement
      How to
      Drill Into Concrete
      How to
      Hang Pictures & Artwork on a Concrete Wall
      How to
      Pour Concrete
      How to
      Tie Rebar
      How to
      Bolt Into Concrete
      How to
      Make Cement
      How to
      Add Concrete to Existing Concrete
      How to
      Make Concrete
      How to
      Adhere Concrete to Concrete
      How to
      Cut Cinder Block
      How to
      Make Fake Rocks Using Concrete
      How to
      Use Concrete Form Tubes
      Advertisement

      About This Article

      Thanks to all authors for creating a page that has been read 71,519 times.

      Did this article help you?

      Advertisement