How to Make Cement

PDF download Download Article
PDF download Download Article

The words cement and concrete are used interchangeably, but that’s not technically correct. Cement, in fact, is one of several ingredients that are combined to make concrete. Cement is a powdery, dry substance that makes concrete when it’s mixed with water, gravel, and sand. [1] Instead of buying a bagged mix, you can try making your own cement by obtaining and burning limestone. Also, in an emergency, you can make what’s known as “survival cement” -- although it should really be "survival concrete" -- by combining mud and grass.

Method 1
Method 1 of 3:

Making Concrete with a Cement Mix

PDF download Download Article
  1. Large hardware stores and home-supply stores (such as Lowe’s or Home Depot) will stock a large variety of cement types. For example, if you’re setting gate posts, purchase an anchoring cement. If you’re laying a patio or a driveway, opt for a fiber reinforced cement.
    • If you are using the cement for a variety of projects or are not familiar with using cement, purchase either a regular (multi-purpose) or fast-setting mix (like Quikrete).
    • Consult the sales staff at the hardware store for additional help selecting a type of cement or concrete.
  2. If you are laying a single layer of concrete that will be thicker than 3 ⁄ 4 inch (1.9 cm)—such as a building foundation or driveway—purchase cement with aggregate mixed in. Aggregate is stones and gravel added to the cement mixture to make it stronger and less likely to crack. [2]
    • If you prefer not to buy cement with aggregate already included, you can also purchase gravel at a hardware store and add this into the aggregate-free cement later.
    Advertisement
  3. Cement is messy, and it will likely get all over your hands. If cement contacts your skin directly, brush it off immediately. To protect your hands, first put on a pair of latex gloves. [3] Then, over these, put on a pair of sturdy work gloves.
    • To protect your eyes, you should also always wear a pair of safety goggles when working with cement.
    • Since cement will harm your lungs, think about wearing a surgeon’s mask or bandana over your mouth when pouring dry cement.
  4. Use the blade of your shovel to stab an opening in the bag near one end. Then grab the cement bag firmly by the other end, and upend it so the powder spills out into the wheelbarrow. [4]
    • If you prefer to use a machine mixer rather than mixing by hand, you’ll pour the opened bag of cement into the machine basin. [5]
    • Avoid shaking the bag as your pour out the cement powder. It’s very dusty, and shaking the bag will fill the air with cement powder.
  5. Using a garden hose, add a reasonable amount of water to the center of the dry cement powder. Start by adding about 1 gallon (3.8 L) of water. [6] It’s best to start out with a smaller amount of water and add more as needed—it’s inconvenient to add a second bag of cement if you add to much water to the first batch.
    • If you’re mixing multiple bags of cement, you’ll quickly get the hang of how much water is necessary.
    EXPERT TIP

    Gerber Ortiz-Vega

    Masonry Specialist
    Gerber Ortiz-Vega is a Masonry Specialist and the Founder of GO Masonry LLC, a masonry company based in Northern Virginia. Gerber specializes in providing brick and stone laying services, concrete installations, and masonry repairs. Gerber has over four years of experience running GO Masonry and over ten years of general masonry work experience. He earned a BA in Marketing from the University of Mary Washington in 2017.
    Gerber Ortiz-Vega
    Masonry Specialist

    Expert Trick: If you're working on a project where you'll have a concrete finish, measure out 3 parts concrete, then add 1 part water. If you're making a concrete foundation for a retaining wall or a post, the concrete can be a little more wet, because the finish won't matter as much.

  6. Use your shovel to stir the water into the dry powder. Pull the dry cement mix from the outer edge of the wheelbarrow into the wet center, and stir until there is no dry powder left in the wheelbarrow. Ideally, the cement should be a little runny at this point, about the consistency of thin putty. [7]
    • Stir slowly, so that the water doesn’t slosh over the sides of the wheelbarrow.
    • If you’re using the mixing machine, simply flip the “On” switch and let the machine stir for you.
  7. Most fast-setting bags of concrete mix will already contain sand, so you won’t need to add any. If you purchased cement without sand already mixed in, add 3 or 4 shovels-full of sand to the soupy concrete mixture, then stir until the sand has been worked in.
    • The technically correct ratio of mixing cement with sand is 1 part cement, 3 parts sand, and 3 parts water. [8] However, you can customize this ratio as you see fit.
    • For most projects, you won’t need 3 times as much sand as cement. Start with a 1:1 ratio instead.
    • If you’re planning to add aggregate to your concrete mixture, add the aggregate now as well. Add sand and aggregate separately to ensure that each gets fully mixed into the wet concrete.
    8. Advertisement
Method 2
Method 2 of 3:

Making Your Own Cement Mix

PDF download Download Article
  1. If you live near a riverbed or other area where limestone is prevalent, you may be able to find limestone naturally. [9] If not, you’ll need to purchase limestone. It can typically be found at landscaping supply stores, and may be available at large plant nurseries or garden centers.
    • If you’re unsure whether or not the rock that you’ve collected is limestone, use a coin to scratch the surface of the rock. Limestone is soft and can be scored by the edge of a coin.
  2. Take sturdy shovel and stab it into the limestone in order to fracture the rock and break it apart. You’ll be heating the rock in a kiln for an extended period of time, and the smaller you can break up the chunks of rock, the less time you’ll have to heat them. [10]
    • Aim to break the limestone into pieces not larger than 2 inches (5.1 cm) across.
  3. In order to ready the limestone for use in cement, place it in a kiln or outdoor wood oven. [11] Turn the kiln up to 900 °C (1,650 °F), and leave the limestone to “bake” for 4 or 5 hours. [12]
    • Always wear thick work gloves when working with a kiln. The gloves will also be useful when you’re pulling the baked lime back out of the kiln, since it could severely burn your skin.
  4. After the 4 or 5 hours have passed, pull the baked limestone out of the oven or kiln. Set it nearby and let the chunks cool off before you touch them. Be careful not to breathe in fumes from the baked limestone, as they are caustic and could damage your lungs. [13]
    • The baked limestone is called quicklime.
    • Consider wearing some kind of respirator when pulling the quicklime out of the kiln. Quicklime is harmful to the body, and even breathing in its dust can harm your lungs. [14]
  5. If the limestone has been baked for long enough, it should have a dry, crumbly consistency. Put on a pair of work gloves and use your hands to crumble the cooled limestone into a fine powder. The resulting powder is cement, which you can mix with water, sand, and gravel to make concrete. [15]
    • If you need to store some of the crumbled quicklime for later use, store it in an airtight container.
    6. Advertisement
Method 3
Method 3 of 3:

Making “Survival Cement” From Mud and Grass

PDF download Download Article
  1. If you are located near a river, lake, or other body of water, you can gather mud from its banks. Otherwise, you may need to make your own mud by digging up clay-rich soil and adding water to it. The clay should be a thin consistency so that it will mix well with dry grass.
    • A clay-rich mud or soil will result in a strong, durable cement.
  2. Walk to a nearby field or riverbank and pull up a large armload of old, dead grass. You’ll use this to mix with the mud.
    • Green grass will not work. The grass needs to be dry and hard in order to make suitable survival cement.
  3. The grass that you’ve harvested will probably be very long, which will prevent it from mixing well with the cement. Solve this problem by using a field knife to cut the grass down into a suitable length. It will be most convenient if you do this on top of a large tarp.
    • For most projects, the grass will work best when cut into sections between 6 inches (15 cm) and 12 inches (30 cm).
  4. Do this near the location where you’ve set the cut grass stalks. Once the mud is on the tarp, set about half of the grass on top of the mud.
  5. Either wearing shoes that you don’t mind getting muddy, or barefoot, step up and down on top of the mud and grass mixture until the two elements have been fully smashed together.
    • If you don’t want to get your shoes or feet dirty, fold a corner of the tarp on top of the mud and grass and stomp on top of that.
  6. At this point, the mud and grass will be smashed into a flat layer. Pick up one edge of the tarp, and lift until the mud/grass mixture folds back over itself. Do this a couple of times, until the mixture is roughly in a round shape.
  7. Place the remaining half of the dry grass stalks on top of the mud and grass mixture. Walk in place on top of the mixture, using the same technique as before. This will force all of the newly-added grass to fully blend with the mud/grass mixture, leaving you with well-blended survival cement.
    • At this point, your survival cement is finished. Begin shaping and working with it immediately, as the mud will dry quickly.
    • You can form your batch of survival cement into a series of bricks, which can be built into a small hut in adverse survival conditions. In non-survival situations, you could use these cement bricks to build a retaining wall or fire pit.
    8. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Things You’ll Need

      • 40-pound bag of cement
      • Mixing basin or wheelbarrow
      • Shovel
      • Hose for water
      • Sand (optional)
      • Aggregate (optional)
      • Latex gloves
      • Work gloves
      • Safety goggles (optional)
      • Mouth protection (optional)

      Tips

      • Commercial cement is a mixture of limestone and oyster shells (along with a blend of other shell types) that has been superheated to remove the carbon dioxide. [16]
        Thanks
        Helpful 0 Not Helpful 0
      • Both sand and aggregate mixture can be purchased at a large hardware store, a home-supply store, or a landscaping-supply store.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Concrete can stain or stiffen any clothing that it comes in contact with, especially if it’s allowed to dry. When making concrete, be sure to wear clothing that you don’t care about.
        Thanks
        Helpful 5 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Drill Into Concrete
      How to
      Hang Pictures & Artwork on a Concrete Wall
      How to
      Tie Rebar
      How to
      Mix Cement
      How to
      Pour Concrete
      How to
      Bolt Into Concrete
      How to
      Adhere Concrete to Concrete
      How to
      Add Concrete to Existing Concrete
      The Best and Safest Way to Cut Cement Backer Board
      How to
      Cut Cinder Block
      How to
      Make Fake Rocks Using Concrete
      How to
      Make Concrete
      How to
      Make Cement in the Wild
      How to
      Use Concrete Form Tubes
      Advertisement

      References

      1. ↑ http://www.ccagc.org/resources/whats-the-difference-between-cement-and-concrete/
      2. ↑ https://www.familyhandyman.com/masonry/pouring-concrete/how-to-properly-mix-concrete/view-all/
      3. ↑ https://www.checkatrade.com/blog/how-to/make-cement/
      4. ↑ https://www.youtube.com/watch?v=OPlH8mU4o1I&feature=youtu.be&t=49s
      5. ↑ https://www.youtube.com/watch?v=OPlH8mU4o1I&feature=youtu.be&t=4m35s
      6. ↑ https://www.youtube.com/watch?v=OPlH8mU4o1I&feature=youtu.be&t=1m57s
      7. ↑ https://www.youtube.com/watch?v=OPlH8mU4o1I&feature=youtu.be&t=2m29s
      8. ↑ http://www.everything-about-concrete.com/concrete-mixing-ratios.html
      9. ↑ https://www.checkatrade.com/blog/how-to/make-cement/
      1. ↑ https://www.checkatrade.com/blog/how-to/make-cement/
      2. ↑ https://www.checkatrade.com/blog/how-to/make-cement/
      3. ↑ http://www.lowtechmagazine.com/2013/09/lime-kilns.html
      4. ↑ http://www.survival-manual.com/cement.php
      5. ↑ http://www.survival-manual.com/cement.php
      6. ↑ http://www.survival-manual.com/cement.php
      7. ↑ http://www.survival-manual.com/cement.php

      About This Article

      Article Summary X

      To make cement from scratch, buy or collect limestone and break it into 2 inch chunks. Put the chunks into a kiln, set the kiln to 900 °C, and let the limestone bake for 4-5 hours. Be sure to wear a respirator when you pull out the limestone, then let it cool completely. Once it's cool, slip on work gloves and crumble the limestone into a fine powder with your hands. The resulting powder is cement, which you can mix with water, sand, and gravel to make concrete! For more tips, including how to use a cement mix to make concrete, or advice on how to make "survival cement" from mud and grass, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 244,728 times.

      Reader Success Stories

      • Harlen Thorn

        Sep 27, 2018

        "This helped me because I was making a underground fort in the red zone near me. The survival one was the best, ..." more
      Share your story

      Did this article help you?

      Advertisement