How to Make a Tornado in a Bottle

Co-authored by Jessie Antonellis-John

Last Updated: November 24, 2024 Fact Checked

With water, dish soap, and a bit of spinning, you can make a tornado in a bottle! This can be a great way to learn how tornadoes work. ^{[1]
X
Research source} For a basic experiment, try making a tornado in a single bottle. If you want to get more advanced, try putting two bottles together. Read on to learn how to get started!

Part 1

Part 1 of 3:

Filling the Bottle(s)

Download Article

1
Fill a plastic bottle with water. Leave two inches of air at the top of the bottle. The size of the bottle doesn't matter – but the bigger the bottle, the bigger the tornado. The bigger the tornado, the easier it will be to observe the effects on the water. ^{[2]
X
Research source}
- If you are only making a one-bottle tornado, you can use a plastic water bottle or a clear glass canning jar. ^{[3]
  X
  Research source} If you are making a larger two-bottle tornado, try using a pair of two-liter soda bottles.
- Try experimenting with more or less water. Record whether the amount of water has any effect on the size and speed of the tornado.
2
Add dish soap. Two squirts from a bottle of concentrated soap will do. You can also use oil, or anything hydrophobic (that repels water). ^{[4]
X
Research source}
- Don't try to use other cleaning products like bleach or non-liquid soap. Do not use laundry detergent: it is designed to interact differently with water than dish soap. ^{[5]
  X
  Research source}
- Try experimenting the amount of dish-washing soap, or the brand of dish-washing soap. See if a particular brand works better than another, or if more or less soap makes a difference.
Advertisement
This step is optional, but it may make it easier to see the tornado in action. ^{[6]
X
Research source} Alternately, add food coloring for flair. ^{[7]
X
Research source} If you're using a large bottle, try putting a few plastic Monopoly houses into the water to simulate the "houses" that are being picked up the tornado.
If you are making a one-bottle tornado, you just need to twist the cap and seal it shut. If you are making a two-bottle tornado, you'll need to find a watertight way to fix the openings so that they face one another. Try using superglue, caulk, duct tape, or a large rubber band. ^{[8]
X
Research source}

Part 2

Part 2 of 3:

Making a One-Bottle Tornado

Download Article

The trick won't work well unless the container is completely airtight. Test the cap with your hand.
2
Spin the bottle. Hold it by the top or the bottom, and use your wrist to shake the water in a loose circular vortex. After a few seconds of spinning, you should see the water begin to swirl in the center. This is your "tornado." Ask questions:
- Why is it spinning? ^{[9]
  X
  Research source}
- Is the tornado spinning clockwise or counterclockwise?
- How does the glitter interact with the tornado?
Try spinning the bottle slower or faster. Try spinning it upside down. Observe whether changing the spin pattern has any effect on how the tornado looks. ^{[10]
X
Research source}
It is responding to "centripetal force" – an inward-facing force that pulls an object or liquid toward the center of its circular path. ^{[11]
X
Research source} In this case, the water is spinning around the "center" of the vortex, which happens to be the center of the bottle because the bottle defines the size of the "body of water." ^{[12]
X
Research source}

Part 3

Part 3 of 3:

Making a Two-Bottle Tornado

Download Article

The connection should be airtight and watertight. Set the bottles upright so that the bottom of the full bottle is sitting on the ground or table, and the bottom of the empty bottle is sticking straight up into the air. Be sure to leave an inch or two of air at the top of the "full" bottle.
Think of it like the motion of flipping an hourglass. The bottom bottle should now be empty of water, and the top bottle should be full of water. Hold the bottles for support – the contraption will be top-heavy! ^{[13]
X
Research source}
The air pressure in the now-top bottle is lower than the air pressure in the now-bottom bottle, so there should not be much water flowing between the mouths of the bottles.
If you gently spin the water-filled bottle on top, water should begin to pour again. This should create a vortex or "tornado" in the center of the water-filled bottle as the liquid flows from a space of low pressure to a space of high pressure. ^{[14]
X
Research source}

Community Q&A

Search

Add New Question

Question

How can I connect the two bottles without leakage?

Community Answer

You can seal it with a glue gun. If not, you can always use duct tape.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 58 Helpful 152
Question

What type of dishwasher soap do you use?

Community Answer

You use dish soap, not dishwasher soap. But you can use any kind of dish soap.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 77 Helpful 156
Question

Can you use oil instead of dish soap?

Community Answer

No. You cannot.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 90 Helpful 121

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

If you are creating a two-bottle tornado, be sure to hold the bottle tops so that they don't break.

Thanks
Helpful 31 Not Helpful 9
Try adding sprinkles. You could also use feathers or salt – anything that you think might get pulled up in the tornado!

Thanks
Helpful 28 Not Helpful 15
Try adding different things to the mixture such as oil and food coloring. Experiment with different liquids.

Thanks
Helpful 26 Not Helpful 17

Show More Tips

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

If you want to have fun with it and make it more realistic, try adding little plastic people or Legos, or use Lego doors and buildings. You can also add leaves or flowers or other items from nature.
Spinning the bottles in a circular motion will create a nice tornado, but you can also experiment with different motions to see what other shapes you can create.

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Things could get messy. Try creating this over a sink.

Thanks
Helpful 22 Not Helpful 9

Things You'll Need

One or two empty bottles: plastic or glass
Dish soap.
Food coloring (optional)
Glitter, salt, or sprinkles (optional)
Monopoly houses, marbles, or pebbles (optional)

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

Log in

How to Make a Tornado in a Bottle

Steps

Filling the Bottle(s)

Making a One-Bottle Tornado

Making a Two-Bottle Tornado

Community Q&A

Video

Tips

Tips from our Readers

Warnings

Things You'll Need

You Might Also Like

Expert Interview

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Quizzes

Explore Categories