How to Make a Toy Parachute

Co-authored by wikiHow Staff

Last Updated: November 9, 2023 Tested

Parachutes are a great way to learn about gravity and air resistance. They are also a great way to pass the time, especially once you begin to experiment with different weights and sizes. If you already know how to make a simple parachute, why not try a larger, more advanced one instead?

Method 1

Method 1 of 3:

Making a Simple Parachute

Download Article

If you are going to use a napkin, choose a large, dinner-sized one. A paper towel could also work. ^{[1]
X
Research source}
Flip the napkin over, and cover the back of each corner as well. This will make the corners nice and strong for the next step. ^{[2]
X
Research source}

Advertisement
3
Punch a hole into each corner with a hole puncher. Make sure that you are only punching through the taped area, otherwise the napkin will rip. ^{[3]
X
Research source}
- If you don't have a hole puncher, cut a small slit into each corner instead.
Each piece needs to be the same length as your square. For example, if your square was 8 inches (20 centimeters) on each side, then your strings should be 8 inches (20 centimeters) long.
Take your first string and poke the end up through a hole. Bring the end down, and tie it to the rest of the string. Do this for the other strings and corners. ^{[4]
X
Research source}
6
Thread the strings through a button. Find a button that has four holes in it. Feed the other end of each string through each hole. Tie the strings together into one big knot under the button. ^{[5]
X
Research source}
- You can also tie the strings to a paperclip, a charm, or a small washer.
- If you have a small toy, like a Lego or plastic soldier, tie two strings together on each side to make loops. ^{[6]
  X
  Research source}
7
Toss the parachute. Hold the parachute by the button, then toss it upwards. If you are allowed to, climb up onto a table or chair, and try again! This will give the parachute even more time to float down!
- If you made loops for a small toy, slip the loops under the toy's arms first.

Method 2

Method 2 of 3:

Making a Parachute for a Toy Soldier

Download Article

1
Cut a large square out of a plastic bag. Make the square at least 8 inches (20 centimeters) on each side.
- This parachute will only work on small toys, about 1 to 2 inches (2.5 to 5 centimeters) tall. Great toys include toy soldiers and Lego men. It won't work on dolls and bears.
This will help keep the strings on. Set the square aside when you are done.
3
Cut two long pieces of string. Each piece of string needs to be twice the length of you square. For example, if your square was 8 inches (20 centimeters) on each side, then the strings should be 16 inches (40 centimeters) long. ^{[7]
X
Research source}
- You can use yarn, fishing line, embroidery floss, or even thread!
4
Tie the end of each string to each corner of the square. Take your first string, and tie each end to a corner on the top of the square. Take your second string, and tie each end to the corners on the bottom. ^{[8]
X
Research source}
- Make sure that you are tying the strings behind the knots so that they don't slide off.
5
Slip a small toy through the loops. Find a small, plastic figure, like a toy soldier or Lego man. Slip the left loop under the left arm, and the right loop under the right arm. If the strings won't stay on, stick a piece of tape over them.
- The toy should be 1 to 2 inches (2.5 to 5 centimeters) tall. If it's too big or heavy, the parachute won't work.
Hold the parachute by the toy, toss it upwards, and watch it float down! If you are allowed to, get onto a chair or staircase, and try again. This will give the parachute more time to fall down.

Method 3

Method 3 of 3:

Making a Large Parachute

Download Article

1
Cut a 24-inch (61-centimeter) square out of a cheap, plastic tablecloth. Make sure it is the thin kind; the kind that have the felt coating on the back will be too thick for this project. If you can't find any cheap, plastic tablecloths, use a large trash bag instead. ^{[9]
X
Research source}
- This parachute will work on action figures that are 3 to 4 inches (7.6 to 10 centimeters) tall, like Star Wars action figures. ^{[10]
  X
  Research source}
Fold the square in half to make a rectangle, then fold it in half again to make a square. Draw a 5-inch (13-centimeter) square on the corner where all four corners are loose (not joined). Cut the square out, going through all four layers, then unfold the square. You will have something that looks like a plus sign. ^{[11]
X
Research source}
3
Tape together the cut corners along the bottom point. Go to the first corner you cut the 5-inch (13-centimeter) square from. Push the edges together to close the square. Place a 2-inch (5-centimeter) piece of tape halfway over the bottom edge. Leave the bottom half of the tape hanging over the edge of the tablecloth. ^{[12]
X
Research source}
- Do this for the remaining three corners.
4
Flip the tablecloth over and fold the pieces of tape onto the back. Flip the tablecloth cove. You should still see the pieces of tape sticking out from underneath it. Fold each piece of tape over the edge of the table cloth. Now the corners are taped on both sides. ^{[13]
X
Research source}
- You will have something that looks like a bag or basket with a slit in each corner. Do not tape these slits up!
5
Cut two long pieces of string, and make a mark at each end. Find some thin cording, such as crochet string, thin yarn, or kite string. Cut two 30-inch (76-centimeter) pieces. Use a marker to make a dot on each string, 1 inch (2.5 centimeters) away from each end. ^{[14]
X
Research source}
- You will need two dots on each string, one fo each end. These will be your guides for the next step.
6
Tape the end of your first string to one of the taped corners. Take your first string, and place the end over one of the corners you taped up. Align the mark with the edge of the tablecloth, then place a strip of tape over it. You will have about ½ inch (1 centimeter) of string peeking out over the top of the tape. ^{[15]
X
Research source}
- Keep the tape horizontal; don't let it hang over the edge of the parachute.
Fold the loose end of the string over the tape, towards the edge of the tablecloth. Place another piece of tape over it to secure it. ^{[16]
X
Research source}
Use the same technique as before. When you are done, tape the other string in the same way. When you are done, you'll have two loops hanging from your parachute. ^{[17]
X
Research source}
9
Tie a knot into the middle of each loop. Hook your finger through the first loop and tug it away from the parachute to find the middle. Tie a knot in the loop right above your finger. The loop should have equal amounts of string on both sides of the knot. ^{[18]
X
Research source}
- Repeat this step for the other loop.
- Leave some space between the knot and the middle of the string. You want to be able to feed elastic through it.
If the loops are too small, you can link mini rubber bands together to make a harness for the figure. You can also lay a strip of tape across the figure and the string to hold everything together.

Community Q&A

Search

Add New Question

Question

What should I do if my parachute will not float?

Community Answer

Try using a lighter object to attach to the parachute. Or, you could use a larger canopy.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 73 Helpful 147
Question

From how high up can I release the parachute?

Community Answer

Holding you hand above your head should be enough. If you can drop it off of a second-story balcony, the parachute will float further. Just make sure that there's no one standing beneath the balcony and that you can get to the parachute again.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 76 Helpful 106
Question

What determines the rate of descent on the parachute?

Community Answer

There are two main variables to make the parachute fall at different speeds: 1) The mass of the object that you are attaching to the parachute (more mass=more gravitational force acting on the object) makes the parachute fall at different speeds. 2) The size of the canopy can make a huge difference to the speed of the fall for example a larger canopy traps air resistance making the parachute fall more slowly and making it more effective.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 75 Helpful 111

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Experiment with dropping the parachute from different heights. ^{[19]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
The higher you are when you drop, the better the parachute will work. Drop it slowly; don't throw it downward. ^{[20]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
You can cut your parachute into other shapes, like octagons or pentagons, but you will need more strings (one for each corner). ^{[21]
X
Research source}

Thanks
Helpful 0 Not Helpful 0

Show More Tips

Tips from our Readers

The advice in this section is based on the lived experiences of wikiHow readers like you. If you have a helpful tip you’d like to share on wikiHow, please submit it in the field below.

If you use this toy parachute for an egg drop, put some kind of cushion (like bubble wrap) around the egg. The parachute won't slow the egg down enough to keep it from breaking.
I have always used a large handkerchief or bandana. Just cut the corners off evenly. It even works great for a small G.I. Joe figure.

Submit a Tip

All tip submissions are carefully reviewed before being published

Submit

Thanks for submitting a tip for review!

Warnings

Always make sure that there isn't anyone standing in the landing zone underneath the parachute.

Thanks
Helpful 10 Not Helpful 3

Things You'll Need

Making a Simple Parachute

Large napkin or plastic bag
Tape
Scissors
String
Hole puncher (recommended)
Button, paperclip, charm, etc.

Making a Parachute for a Small Toy

Plastic bag
Scissors
String
And More!
Small toy (ie: toy soldier or Lego man)

Making a Large Parachute

Cheap, plastic tablecloth
Measuring tape
Marking pen
String
Tape
Scissors
Small toy
And more!

You Might Also Like

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

Log in

How to Make a Toy Parachute

Steps

Making a Simple Parachute

Making a Parachute for a Toy Soldier

Making a Large Parachute

Community Q&A

Tips

Tips from our Readers

Warnings

Things You'll Need

Making a Simple Parachute

Making a Parachute for a Small Toy

Making a Large Parachute

You Might Also Like

References

About This Article

Reader Success Stories

Did this article help you?

Quizzes

You Might Also Like

Featured Articles

Trending Articles

Featured Articles

Featured Articles

Watch Articles

Trending Articles

Explore Categories