Download Article
Tips for creating an animated movie, from making an animatic to inserting sound
Download Article
- Pre-Production |
- Production |
- Post-Production |
- Video |
- Q&A |
- Tips |
- Warnings
Looking for a fun and creative way to express yourself? Try making an animated short film! Animation is perfect for those who like to draw and have a director’s eye. There are many styles of animation, and starting with a short film is a great way to practice different animation techniques and develop a signature style. Making an animated film takes time and patience, but with some guidance, you can have an awesome film to show all your friends.
Steps
-
Write out a script. This is often easier said than done, but you need to write down your ideas clearly and give them structure before you start working. Unlike in live action, it is almost impossible to "improvise" an animated film, as it simply takes too long to animate everything. You can use a simple Word document or script writing software like Celtx, Writer Duets, or Final Draft. Your script doesn't need dialog, but it does need:
- A theme. What is the "point" of the short film? This doesn't need to be grand, profound, or complicated. It can be anything from "the loss of childhood innocence," or "boredom is a state of mind," to "I want to make people laugh with this joke." Think of it as a guiding principle for your film. [1] X Research source
- Characters. What will hold the attention of your audience? This can be anything from a person or an animal to a squiggly line, like the Oscar-winning short "The Dot and the Line: A Romance."
- Visuals. Where does the short take place? What's the mood, or atmosphere? A screenplay needs to tell the story of the short in full so it can be used as a blueprint for future work. [2] X Research source
- A beginning, middle, and end.
This sounds obvious, but that's the point -- almost all stories are told in three specific, delineated parts, or acts. This doesn't mean you must
have a three-act story, or even "characters." You do, however, need to think out the "action" of the short film before moving forward.
- Act 1 introduces the characters and a problem (they're hungry, the world is ending, boy has a crush on someone, etc.)
- Act 2 complicates the story/problem (All the stores are closed, the bad guy might win, the person has a boyfriend already, etc.).
- Act 3 provides resolution to the problem (they find a sandwich shop, they save the world, the boy meets another person, etc.)
-
Sketch character models. Before starting to animate, you need to know what your characters are going to look like. Sketch them in a variety of poses, costumes, and expressions to get a feel for what they will look like. Remember that a character can be anything in an animated film, from a bear to a pair of salt & pepper shakers. Still, you want to develop your characters ahead of time so that they look consistent when you animate them.Advertisement
-
Draw up a storyboard. Storyboards are individual drawings for every bit of action in the script and are used in the production of almost every film -- animated or otherwise. They are both simple and comprehensive, as you need one for every change you want in the film. They do not, however, need background detail or color, unless it is essential to the story. You can find and print a variety of free storyboard templates online, or draw your own. Each frame of the storyboard has two parts:
- The Image: In a rectangular box, draw the principal action of the shot, ignoring background images for now. You can also draw notes or arrows to indicate movement.
- The Dialogue. Underneath the shot, write down what needs to be said in the shot, the proposed length of the shot, and any effects (zoom in, shaky camera, etc.) [3] X Research source
-
Import your storyboard into a filmmaking program, saving each frame individually. Once you have your shots planned out, import them into your computer. Make sure to name them appropriately (Act1.Scene1.Shot1.jpg, for example). When you're done, import them all into your film editing software (iMovie, Windows Movie Maker, Final Cut Pro, Adobe AfterEffects, etc.) and put them in the correct order. [4] X Research source
- Adobe AfterEffects or Premier Pro are considered the industry standards, but you can use whatever program you are most comfortable with.
-
Use your storyboard to make a timed slideshow, or animatic. Animatics are the rough cuts of animation -- they get the pace and rhythm of the short together and allow you to to get the timing right for your final short. This sounds complicated, however, they are really just slideshows with proper timing. Put the images of the storyboard in order on your editing software and extend, cut, and play with them until you have a "rough" cut of the final film. [5] X Research source
- You can find examples of animatics online, like the animatic for the music video "Feel Good Inc." as well as some Pixar animatics.
- Almost all animated movies are made into animatics first. Otherwise you risk spending hours fully animating a scene that needs to change, get longer or shorter, or get deleted.
-
Add the dialog and sound effects and adjust the timing of the animatic as needed. Once you have your rough timing down, it's time to pre-record the dialog. This doesn't have to be perfect, and you can even fake the sound effects with your mouth and hands if you want. What matters is the timing. Do you have enough time in the "shot" to get all the words out? Extend or shorten the length of your slides as necessary.
- The closer you can get the dialog to perfect, the better, as most good voice acting requires proper timing. That said, now is not the time to worry about the finer details of voice acting. You need to get your animatic together before moving on to full production.
EXPERT TIPFilm ProducerMelessa Sargent is the President of Scriptwriters Network, a non-profit organization that brings in entertainment professionals to teach the art and business of script writing for TV, features and new media. The Network serves its members by providing educational programming, developing access and opportunity through alliances with industry professionals, and furthering the cause and quality of writing in the entertainment industry. Under Melessa's leadership, SWN has won numbers awards including the Los Angeles Award from 2014 through 2021, and the Innovation & Excellence award in 2020.Take some extra time in the editing phase to fine tune your timing. Since a short film is only about 15 minutes, everything has to be on point, from the writing to the voice of the character to the location.
-
Review your animatic as if it were the final film. The final animatic should tell the full story of your film, minus the trappings of color, backgrounds, and details.
- If you are knowledgeable of video editing , you can add pans, zooms, and transitions right now to test them before your final editing.
-
Consider purchasing a tablet. Tablets are small computer pads that come with an electronic pen, allowing you to "draw" straight into your computer. Drawing well with a mouse is nearly impossible, and unless you plan on small projects or stop-motion work, you will almost definitely need a tablet.
Advertisement
-
Determine your animating medium. This usually depends on your expertise and hardware. For example, it is very difficult, if not impossible, for a beginner with an older computer to make 3D animations like Pixar. There are many, many animating software and styles, and all of them have intricacies and techniques unique to the software.
- 2D Animation: This is the classic cartoon, hand-drawn look. The characters are flat line drawings. Originally, they were drawn frame by frame, but now there is a variety of software that makes the process much faster, such as Synfig, Pencil2D, ToonBoom, or even Adobe Photoshop. Traditionally, you use 12-24 drawings per second of film.
- 3D Animation: Similar to the models used in video games and movies like Toy Story and Shrek, 3D animation is much harder to master. You make models of the characters and code movement into them, making 3D animation a sort of artistic/coding hybrid. You also need to add lighting and textures. 3D software can used, yet it takes a long time and requires software like AutoDesk, Poser Pro, Aladdin, or Sketchup. Most 3D animation is the result of large teams working together.
- Stop-Motion: So simple anyone can do it, stop-motion is when you use real-life figures or drawings and take a picture after every small movement. When the pictures are played back to back at high speeds, it looks like movement. It is incredibly time-consuming, however, as you often need upwards of 12 photos per-second of footage to make it look smooth. You can use cut-outs, clay models, individual drawings, or real people to make it. [6] X Research source
- Rotoscoping: A niche form of animation found in films like A Scanner Darkly, rotoscoping is animating on top of conventionally shot films. You will need a tablet, and you go through the footage frame by frame, using the live video as a guide for drawing the characters. The result is a realistic, but still animated, look.
-
Draw out your backgrounds. Start with your settings, as the characters are superimposed on them. The background should be everything that the characters do not interact with, as anything that moves needs to be animated. The background should be a big drawing and scanned in at high resolution. This allows you to "zoom in" on certain sections without distortion. For example, if you have two characters talking in a cafe, you want to draw the whole cafe behind them. But you may want the "camera" to focus in on each character as they talk individually. Instead of redrawing the background behind him, you can copy and paste a smaller section of your detailed background for "close ups." [7] X Research source
-
Sketch, model, or design your "key poses. " What are the essential poses of your characters, or defining actions each one makes, in the scene? Think of these as the "destinations" for each piece of movement. Take, for example, a character winding up for a punch. You could break this down into three "key poses," each of which needs to be drawn and saved separately. [8] X Research source
- Key Pose 1 = Resting. It could be a face of surprise, anger, or determination, or simply the character with its hands at its sides.
- Key Pose 2 = Winding Up. How does the character cock their arm back? Don't worry yet about the movement to get to this position, just draw out them with their arm back and ready to release.
- Key Pose 3 = The Follow Through. Where does the character end up right after the punch? Their arm will be exposed and their body likely follows through. Again, you want the final pose, not the frames as the hand goes through.
- The more key poses you draw, the more complex the movement will be. For example, you can add keyframe sof the character looking shocked, balling into a fist, dropping their elbow, swinging their arm, punching, then spinning around on the follow through.
-
Draw out the "in-between" frames. Take the punch for example -- how do you get from key to key? There is some advanced software that will do this for you -- once you've made character models, the software will "render" the movement in between for you. However, if you are just starting out, you'll likely need to draw your own frames by hand. The more frames you draw, the smoother the action will look.
- It can help to put your keyframes on the screen as guides. This helps you see where you need to get the characters, and where they started.
- If something doesn't move, don't bother re-drawing. Copy and paste the keyframe, erase the part that needs to move, and keep everything else where it was.
-
Composite the footage. Composting is just a fancy way to describe stringing the movie together. This can be as simple as ordering all the frames for stop-motion or as complicated as rendering a 3D model with accurate lighting. Again, your method of animation will determine how you composite something:
- For 2D animators, compositing is about making the motion looks smooth. Software like ToonBoom will do this for you, and may be called "rendering."
- For 3D animators, know that this takes a long time. Lighting effects and textures are difficult to program, and even the fastest computers may take hours to composite a video.
- For stop-motion animators, you should play with frame length, adjusting the shots by a tenth or hundredth of a second to get smooth, fluid motion. [9] X Research source
Advertisement
-
Record any dialog for the final movie. Now that you have the nearly-finished animation, it's time to get the vocals just right. Your voice actors can see the final scene, their characters' expressions, and the timing you want in your final shot. This allows them (or you) to deliver the best vocal performance.
- Note that, at this point, any changes to the animation might be very time-consuming to make. This is why careful pre-production is essential to an animated film of any length.
-
Add in sound-effects where appropriate. Sound effects should come after the voice actors, and tuned to the appropriate volume where they don't overpower the dialog. There are some exceptions to this rule, of course. For example, if there is an explosion the characters need to react to, it may be best to put it in first, before recording dialog. This helps the actors out with reactions.
- Sound mixing is an important, and subtle, art form. Invest in a good pair of headphones and/or speakers to fine tune all the volumes correctly.
-
Cut the film into your final vision. Now that you've got the whole movie together, how does it hold up? The chances are that some of the transitions feel clunky and a scene or two goes longer than it should. Just like you would edit any live-action film, you need to turn a critical eye to your animated piece and polish it until it sparkles. While there is no "correct" way to edit a film, there are a couple of principles to keep in mind:
- Do any scenes feel quick and essential? Do you feel engaged the whole time? Does a specific line or shot help move the story or theme along? If the answer to any of these questions is no, start trimming. Oftentimes the first and last lines of dialog are inessential, as jumping straight into/out of a scene is usually more engaging. Every frame counts when editing.
- Watch the film with someone who is distant from the project. Were there parts the got bored? Did anything confuse them or need more time? How can you cut and trim your story to make it as gripping as possible?
- How do the scene flow together? Sometimes 2-3 seconds of background footage helps the viewer catch their breath and dive into the next scene before dialog starts.
-
Add your polishing touches, like effects, transitions, and color correction. For example, if you want an old-time, sepia tint to your movie, add it last. These sorts of small changes are unnecessary while you are trimming, cutting, and building your movie. Moreover, they will be useless if you cut the scene or change the color scheme. All these minute touches need to come last, once you're sure the "meat" of the movie is done.
- Add wipes, dissolves, or fade-ins to the scene transitions.
- Add any filters or effects over the finished footage.
- Add titles and credits to the beginning and end as necessary, at the very end.
Advertisement
Community Q&A
Search
-
QuestionWhat are some examples of free animation software?Community AnswerBlender is a great free 3D software with a supportive and talented community.
-
QuestionDoes the storyboard become part of the film?Community AnswerThe storyboard is just a rough sketch to convey your idea. Since you will probably have your movie acted out, filmed and editied, the storyboard itself won't be part of the movie.
-
QuestionCan I get iMovie on an iPad Mini?GregcornCommunity AnswerYes. Just go to the app store and search for "iMovie." Once it is downloaded, tap on the app, and it will lead you through a tutorial on the software.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- Take your time in pre-production. It will save a lot of headaches later.Thanks
- Work in small chunks for the best results -- a scene, an action, etc. -- and then build them together later.Thanks
- Make a test film, no more than 20-30 seconds, if you are just starting with a new software. This helps you learn the program and the challenges before diving into your vision.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Don't expect perfection in your first few films. Animation takes a lifetime to master.Thanks
Advertisement
References
- ↑ https://www.screenwriting.info/
- ↑ https://thescriptlab.com/screenplay#
- ↑ https://www.vyond.com/resources/what-is-a-storyboard-and-why-do-you-need-one/
- ↑ https://designinstruct.com/digital-art/howto-animated-short-film/
- ↑ https://www.bloopanimation.com/animatic/
- ↑ https://stopmotion101.blogspot.com/2008/10/tips-and-tricks-timing.html
- ↑ https://designinstruct.com/digital-art/howto-animated-short-film/
- ↑ https://www.videomaker.com/tutorial/the-three-essential-stop-motion-concepts-every-animator-should-know
- ↑ https://cgi.tutsplus.com/articles/step-by-step-how-to-make-an-animated-movie--cg-3257
About This Article
Article Summary
X
As with any type of film, animation takes time, patience, and a lot of planning, but anyone with a good imagination can make an animated short film. Start by writing out a script that has well-developed characters, a theme, and a beginning, middle, and end. Before starting to animate, sketch your characters in a variety of poses, costumes, and expressions to get a sense of what they look like. You can now storyboard your script by drawing out the principal action of each shot. Import your storyboard into a filmmaking program so you can use them to make a timed slideshow or animatic, which is a rough cut of animation. Add dialogue and sound effects to the animatic to make a complete story. Once this process is finished, you can animate your film by first picking a medium, like stop-motion or rotoscoping. Then, draw out your backgrounds and sketch, model, or design the key poses for your characters. Add your in-between frames to string your movie together. To learn how to cut your film into the final version, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 415,683 times.
Reader Success Stories
- "I'm planning on majoring in animation at SCAD. I have been trying to make some on my Microsoft Word, but I had no idea where I had to start. This is really going to help with my animation scholarships as well. " ..." more
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I'm planning on majoring in animation at SCAD. I have been trying to make some on my Microsoft Word, but I had no idea where I had to start. This is really going to help with my animation scholarships as well. "
..."
more
"This information is presented very well. Even a beginner can equip themselves adequately and, most importantly, be cautious in every step."
..."
more
"I now know that how to animate correctly in time. Thank you, wikiHow. You will get a good and review."
"I was thinking of doing an animation of cutting my hair, and this helped me a lot!"
"The wording was amazing and the steps were super clear."
