How to Mod Podge Photos

PDF download Download Article
PDF download Download Article

Mod Podge is a wonderful medium that acts as both a glue and sealant. It is typically used in scrapbooking and general arts and crafts. Most people use it to glue scrapbooking paper to objects, such as wooden boxes. Photographs are also popular, but how you Mod Podge them depends on whether they are printed using a laser or inkjet printer.

Method 1
Method 1 of 3:

Mod Podging Laser Photos

PDF download Download Article
  1. Avoid using photo paper; it is too thick, and there's that the colors may run. You can try using this method on regular photos as well, but be aware that you may damage them.
  2. Trace the side of the item onto the photo first, if needed. Next, cut the photo down with a paper slicer or a metal ruler and craft blade.
    Advertisement
  3. You can do this using a foam brush or a wide, flat paintbrush. If you want to, you can also brush the Mod Podge onto the back of the photo as well.
  4. Smooth the paper out with a rubber roller or a brayer to smooth the photo down. Start from the center of the photo and roll your way outwards. Ensure that there are no wrinkles or bubbles. [1]
  5. [2] Extend the Mod Podge past the edges of the photo to help seal it in. [3] Don't worry, you will be adding more coat of Mod Podge on top.
  6. Wait for about 30 minutes, then brush on a second coat of Mod Podge. If need to add a third coat, let the second one dry first.
  7. This will take anywhere from a few hours to several days, depending what you used. Read the label on your bottle to be sure. Once the Mod Podge has dried, you can display your project. If you are going to apply photos to the other sides of your item, now is the time to do so.
    8. Advertisement
Method 2
Method 2 of 3:

Mod Podging Inkjet Photos

PDF download Download Article
  1. Do not use photo paper as it is too thick; the coating may also interfere with the Mod Podge.
  2. This will take at least 10 minutes. If you move onto the next step too soon, the ink may run and bleed. [4]
  3. Do this with a paper slicer or a metal ruler and a craft blade. If you need to, trace your item onto the photo first, then cut the photo out.
  4. If you get inkjet paper wet, the ink will run. The clear, acrylic sealer will prevent this from happening. Spray both sides of the paper with 2 to 3 coats of clear, acrylic sealer. Let each coat/side dry completely before doing the next one. [5]
    • This step is time consuming, but the results are worth it.
    • The finish (matte, glossy, or satin) does not matter because you will be Mod Podging over it.
  5. Paint the Mod Podge onto the front of the photo first, then let it dry. [6] Flip the photo over, paint the back, then let it dry as well. [7] You can do this with a wide paintbrush or a foam brush.
  6. You can do this with a wide, flat paintbrush or a foam brush. If you want to, you can apply the Mod Podge to the back of the photo as well. [8]
    • If you are going to Mod Podge photos onto multiple sides, start with just one side for now.
  7. Use a rubber roller or a brayer to smooth the photo down. Start from the middle of the photo and work your way outwards. Make sure that there are no bubbles or wrinkles. [9]
  8. Keep this coat of Mod Podge light and thin. [10] Be sure to extend the Mod Podge past the edges of the photo; this will help seal it in. [11]
  9. [12] Let the project dry for about 30 minutes first, then apply another coat of Mod Podge. If you want to, you can apply a third coat, but let the second one dry first.
  10. This can take a few hours to several days, depending on the type you used. Check the label on your bottle to be certain. Once the Mod Podge is dry, you can display your project, or apply photo to the other sides (if you are Mod Podging a box or block).
    11. Advertisement
Method 3
Method 3 of 3:

Transferring Photos

PDF download Download Article
  1. Wood surfaces are the most popular, but you can use natural/unglazed tile, fabric, and canvas as well. Unlike in the previous methods, you won't be gluing down the paper itself; you'll be transferring just the image.
    • The transferred image will not be perfect. It will have a worn, chipped, vintage-y feel to it. Many people find that this adds a certain charm. [13]
  2. Do not use an inkjet printer, or the ink will smear. Be aware that the image will come out in reverse after you transfer it. If this bothers you, mirror the image using an image editing program first.
    • If you don't have access to a laser printer, you can try using an inkjet printer with a dry toner. [14]
  3. Regular matte Mod Podge will make the image translucent so that the surface's texture (ie: wood grain) will show through the photo. Mod Podge Transfer Medium is white, and it will make the photo opaque.
    • If you are using fabric, choose Mod Podge Transfer Medium.
  4. If the image has a white border on it, be aware that the boarder will show up after you transfer it. If you don't want this white border, cut it off. [15]
    • Use a metal ruler and a craft blade for sharp, clean lines. You can also use a paper slicer instead.
  5. Set the image face up on top of a sheet of paper—a silicone mat would be better. Apply the Mod Podge using a foam brush. Make sure that you coat the image thickly and evenly. [16]
  6. Smooth it don using a rubber roller or brayer. If any Mod Podge leaks out from under the image, wipe it off immediately. [17]
  7. This may seem like a long time, but the paper must be fully dry before you move onto the next step. If you get impatient and move on too soon, the image may not transfer properly. [18]
  8. Dampen the back of the paper with a wet sponge or towel. Gently rub off the paper backing using your finger. Take your time and go slowly. As you rub the backing away, the image will begin to appear! [19]
    • Don't rub too hard, or you will rub the actual image off.
    • Repeat the process if there is any paper residue stuck to the transferred image.
  9. This will give the Mod Podge enough time to cure. If you move ahead too soon, you will risk the surface getting tacky. [20] For a more vintage-y touch, lightly sand the edges of the image before you seal it.
  10. You seal it with regular Mod Podge or with a clear, acrylic sealer spray. Let the sealer dry completely before using the project. This could take a few hours to a couple of days depending on what you used.
    • Use a clear, acrylic sealer for fabric.
    • You can wash fabric as long as you follow the directions on the Mod Podge Transfer Medium bottle. [21]
    12. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you transfer a photo onto wood using Mod Podge?
    Nicole Bolin
    Crafts & DIY Specialist
    Nicole Bolin is a Crafting Specialist and the CEO of Stencil, a DIY Craft Studio in Phoenix, Arizona. Nicole specializes in interior design and various craft and DIY projects. Nicole holds a Certificate in Interior Design from the New York Institute of Art and Design. She opened Stencil in 2017 to teach others to create DIY projects that fit their home and lifestyle.
    Nicole Bolin
    Crafts & DIY Specialist
    Expert Answer
    Make sure you use several thin coats of Mod Podge rather than one thick coat. If it is really thick, it won't dry well on the wood. You should also avoid over brushing, as those brush strokes can get dried into your Mod Podge.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 1 Helpful 1
  • Question
    What kind of paper to purchase for printing?
    Community Answer
    Choose a standard printer paper, as it would be easier to adhere to the slightly textured surface.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 1
  • Question
    Can I mod podge a photo onto a painted canvas?
    Snakey006550
    Top Answerer
    Yes, you can use Mod Podge to attach a photo to a painted canvas. To do this, start by painting your canvas and letting it dry completely. Then cut the photo to the desired size. Apply a thin layer of Mod Podge to the back of the photo and place it onto the canvas, smoothing out any air bubbles or wrinkles. Once the photo is in place, brush a thin layer of Mod Podge over the top of the photo to seal it. Allow it to dry completely, and you can add additional layers of Mod Podge for extra protection if needed. Just be sure to handle the photo gently to avoid smudging.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Read Video Transcript

      Tips

      • If you must use an original photo, you'll need to hold it down so that it doesn't warp. [22]
        Thanks
        Helpful 4 Not Helpful 0
      • Applying Mod Podge over photo paper is not recommended because of how thick it i and how sensitive it is to moisture. [23]
        Thanks
        Helpful 1 Not Helpful 0
      • Inkjet photos need to be coated beforehand. Laser photos do not. [24]
        Thanks
        Helpful 0 Not Helpful 0
      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      Mod Podging Laser Photos

      • Laser printer
      • Printer paper
      • Metal ruler and craft blade or paper slicer
      • Item to Mod Podge photo onto
      • Mod Podge
      • Foam brush or wide paintbrush
      • Rubber roller or brayer

      Mod Podging Inkjet Photos

      • Inkjet printer
      • Printer paper
      • Metal ruler and craft blade or paper slicer
      • Item to Mod Podge photo onto
      • Clear, acrylic sealer
      • Mod Podge
      • Foam brush or wide paintbrush
      • Rubber roller or brayer

      Transferring Photos

      • Laser printer
      • Printer paper
      • Metal ruler and craft blade or paper slicer
      • Item to transfer photo onto
      • Rubber roller or brayer
      • Regular matte Mod Podge or Mod Podge Transfer Medium
      • Foam brush or wide paintbrush
      • Rag or sponge
      • Mod Podge or clear, acrylic sealer


      You Might Also Like

      How to
      Make Digital Art
      Convert an Image into a Line Drawing: Easy Photoshop Tutorial
      How to
      Mat Photos
      How to
      Turn a Photo Into a Puzzle
      Advertisement

      References

      1. ↑ http://www.oursouthernhomesc.com/mod-podge-photo-ornaments/
      2. ↑ Nicole Bolin. Crafts & DIY Specialist. Expert Interview. 9 September 2020.
      3. ↑ http://www.oursouthernhomesc.com/mod-podge-photo-ornaments/
      4. ↑ http://modpodgerocksblog.com/learn-how-to-mod-podge
      5. ↑ http://modpodgerocksblog.com/learn-how-to-mod-podge
      6. ↑ Nicole Bolin. Crafts & DIY Specialist. Expert Interview. 9 September 2020.
      7. ↑ http://modpodgerocksblog.com/learn-how-to-mod-podge
      8. ↑ http://www.oursouthernhomesc.com/mod-podge-photo-ornaments/
      9. ↑ http://www.oursouthernhomesc.com/mod-podge-photo-ornaments/
      1. ↑ Nicole Bolin. Crafts & DIY Specialist. Expert Interview. 9 September 2020.
      2. ↑ http://www.oursouthernhomesc.com/mod-podge-photo-ornaments/
      3. ↑ Nicole Bolin. Crafts & DIY Specialist. Expert Interview. 9 September 2020.
      4. ↑ http://modpodgerocksblog.com/2016/04/top-five-tips-using-mod-podge-photo-transfer-medium.html
      5. ↑ http://modpodgerocksblog.com/2016/04/top-five-tips-using-mod-podge-photo-transfer-medium.html
      6. ↑ http://modpodgerocksblog.com/2016/04/top-five-tips-using-mod-podge-photo-transfer-medium.html
      7. ↑ http://modpodgerocksblog.com/2016/04/top-five-tips-using-mod-podge-photo-transfer-medium.html
      8. ↑ http://modpodgerocksblog.com/2016/04/top-five-tips-using-mod-podge-photo-transfer-medium.html
      9. ↑ http://modpodgerocksblog.com/2016/04/top-five-tips-using-mod-podge-photo-transfer-medium.html
      10. ↑ http://modpodgerocksblog.com/2016/04/top-five-tips-using-mod-podge-photo-transfer-medium.html
      11. ↑ http://www.ottlite.com/Get-Inspired/Ottlite-Blog/Article/248/Mod-Podge-Photo-Transfer-Tote-Bag
      12. ↑ http://www.ottlite.com/Get-Inspired/Ottlite-Blog/Article/248/Mod-Podge-Photo-Transfer-Tote-Bag
      13. ↑ http://modpodgerocksblog.com/learn-how-to-mod-podge
      14. ↑ http://modpodgerocksblog.com/learn-how-to-mod-podge
      15. ↑ http://modpodgerocksblog.com/learn-how-to-mod-podge
      16. ↑ http://modpodgerocksblog.com/learn-how-to-mod-podge
      17. ↑ http://www.oursouthernhomesc.com/mod-podge-photo-ornaments/
      18. ↑ http://hellocreativefamily.com/how-to-mount-a-photo-to-canvas-tutorial-5-00-gift/

      About This Article

      Article Summary X

      To add photos to your crafts with Mod Podge, print the photo out on regular printer paper. Use a craft knife to cut out the part of the photo you want to put on your item. If you used an inkjet printer, make sure the ink is dry first, then coat both sides of the cutout with a clear acrylic sealer. If you used a laser printer, skip this step. Use a foam brush to apply a thin coat of Mod Podge to both sides of the photo and wait for it to dry. Add a thin layer of Mod Podge to your craft item, then press the photo down on top of it, face-up. Smooth out any wrinkles or bubbles with a rubber roller. Brush another thin coat of Mod Podge on top of the photo, extending past the edges to help seal it in place. Let it dry for about 30 minutes, then add a second coat. Let the Mod Podge dry completely before adding other decorations or displaying your project. For more tips, including how to transfer an image to an item with Mod Podge, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 123,485 times.

      Reader Success Stories

      • Sandy Baier

        Dec 30, 2019

        "I'm a new to this, and the article gave me all the information I needed."
      Share your story

      Did this article help you?

      Advertisement