Download Article
Download Article
This article tells you the basics of mounting a motherboard in a computer case.
Steps
Download Article
-
Verify that you are as static free as possible. -
Open the case you want to mount the motherboard in.Advertisement -
Verify all metal hex nuts are in place to fit the new board. Make sure none will short any solder points on the board. -
Verify all plastic spacers are in place to accommodate the new motherboard. -
Place the motherboard into the case. -
Screw the screws in place to hold the board in place. Make sure they are the only thing that line up with the hex nuts...That is the whole purpose of those.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- It is best to have all the screws in place and make sure that the motherboard is properly aligned before you tighten down the screws.Thanks
- Be very careful when placing the motherboard on the hex screws as you can cut or nick one of the circuit traces on the motherboard causing permanent damage.Thanks
- Don't twist, warp, or flex the motherboard - this can cause permanent damage.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Avoid working on carpeting as it generates static electricity.Thanks
- Make sure your hands are dry.Thanks
- Use an anti-static strap that is electrically grounded. Straps can be purchased at electronic supply stores and many computer parts dealers.Thanks
- Do not wear fleece clothing.Thanks
- There should only be as many hex nuts as there are screw holes to hold the board in placeThanks
- Do not use a magnetic screwdriver.Thanks
- At no time should you ever leave the motherboard/CPU/other components on the ground or on the table. Most people rest their motherboard on the box it came in. The anti-static bag outside layer is not conductive and is made of the same material as inside the bag so they are a good place to put your raw motherboard.Thanks
Advertisement
About This Article
Thanks to all authors for creating a page that has been read 99,622 times.
Advertisement
