PDF download Download Article
Quick ways to troubleshoot your Nintendo Switch when your display shows no signal
PDF download Download Article

Are you having trouble connecting your Nintendo Switch to your TV? If your Switch shows no signal on your screen, there are plenty of easy fixes to try. You should make sure your Switch is fully charged, your wires are working properly, and your HDMI settings are correct. This wikiHow will show you how to troubleshoot your Nintendo Switch when it won't connect to your TV, screen, or monitor.

Things You Should Know

  • Hold the "POWER" button for 12 seconds to force-shutdown your Switch.
  • Switch to a different HDMI port on your display screen.
  • Disconnect all cables and reconnected them in the right order: USB-C to dock → HDMI to dock → AC Adapter to wall outlet → HDMI to TV.
Method 1
Method 1 of 7:

Charging the Switch

PDF download Download Article
  1. When your dock is properly plugged in and the Switch is docked, you should see the charging status on the top-left corner of your Switch. [1]
    • If your Switch still isn't turning on after substantial time in the dock, the problem may lie in your dock.
      • If there's a different Switch dock available, use it to see if this fixes the problem.
  2. Charge the Switch directly. You can use the AC adapter to charge the Switch without the dock. [2]
    • Remove the Switch and unplug the USB-C connector from the dock. Leave the AC adapter plugged into the wall.
    • Insert the USB-C connector directly into the bottom of the Switch. Your Switch should begin to charge.
    • If the Switch turns on after charging, you'll need to order a replacement dock or try to connect without a dock .
  3. Advertisement
Method 2
Method 2 of 7:

Restarting the Switch

PDF download Download Article
  1. You'll need to do this for at least 3 seconds. This is the button at the top-left of the Switch. You'll see a small Power icon next to the Volume buttons. [3]
  2. This will be underneath Sleep Mode . [4]
  3. Your Switch will restart.
    • If you don't see this menu, press and hold the POWER button for at least 12 seconds to force-shutdown your Switch.
    • When the Switch has finished restarting, you can dock it again.
  4. Advertisement
Method 3
Method 3 of 7:

Trying a New HDMI Cable

PDF download Download Article
  1. You may be using an HDMI cable that is damaged or old. In this case, purchase a new HDMI cable or use one that works on another device.
  2. Make sure to remove your Switch from its dock while you reconnect all the cables.
  3. Use the port labeled HDMI Out .
  4. This is the block-shaped adapter.
  5. Use an available HDMI port on your display screen.
  6. Make sure it's docked correctly. [5]
    • The Switch should display on your screen. If it doesn't, try to press the Power button located at the top-left of the console.
  7. Advertisement
Method 4
Method 4 of 7:

Changing the HDMI Port

PDF download Download Article
  1. In some cases, a new port could fix your issue.
  2. Connect your HDMI to a new port. If the display still doesn't cast your Switch, try the remaining available HDMI ports. [6]
    • If you don't have success, repeat these steps with a new HDMI cable to ensure it isn't a cable issue.
  3. Advertisement
Method 5
Method 5 of 7:

Reconnecting Cables Correctly

PDF download Download Article
  1. This includes the USB-C connector of the Switch's AC adapter, the AC adapter itself, and the HDMI cable. [7]
  2. Make sure to remove your Switch from its dock while you reconnect all the cables.
  3. Flip open the back of the dock and use the port labeled AC adapter .
  4. Use the port labeled HDMI Out . [8]
  5. This is the block-shaped adapter.
  6. Use an available HDMI port on your display screen.
  7. Make sure it's docked correctly. [9]
    • The Switch should display on your screen. If it doesn't, try to press the Power button located at the top-left of the console.
    • You should now be able to play your Switch on the TV .
  8. Advertisement
Method 6
Method 6 of 7:

Changing TV Resolution Settings

PDF download Download Article
  1. You'll need to use your Switch in handheld mode for this method. When you first set up your Switch , you might have missed this option.
  2. In most cases, you'll need to click any button three times.
  3. This is the cog icon located at the bottom of the screen. [10]
  4. You can find this on the left panel, underneath Controllers and Sensors . [11]
  5. Set this to Automatic if it isn't already.
  6. This is the first option. [12]
  7. If your Switch is already set to Automatic , try 480p , 720p , or 1080p .
  8. The picture should now be displayed on your screen. If it isn't, try another resolution setting.
    • If you have gone through all the resolution options, return to the RGB Range settings and toggle between Full Range and Limited Range .
  9. Advertisement
Method 7
Method 7 of 7:

Turning off Match TV Power State

PDF download Download Article
  1. You'll need to use your Switch in handheld mode for this method.
  2. In most cases, you'll need to click any button three times.
  3. This is the cog icon located at the bottom of the screen.
  4. You can find this on the left panel, underneath Controllers and Sensors .
  5. By default, this will be On .
    • Clicking this will toggle it Off .
    • This ensures that your Switch will stay on despite your display being off. [13]
  6. Advertisement

Expert Q&A

Ask a Question
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!

      About This Article

      Thanks to all authors for creating a page that has been read 115,229 times.

      Did this article help you?

      Advertisement