Download Article
Easily repair a keyboard key that popped off with our quick walkthrough
Download Article
Do you have a key on your Dell laptop keyboard that's falling off? Luckily, it's a pretty simple process to pop it back into place! This wikiHow article teaches you how to replace or fix a key by popping it back into place on your Dell laptop keyboard. Before you begin, you may want to turn off your laptop to avoid errors in any open programs.
How to Replace a Dell Laptop Keyboard Key
Replace the white or clear retainer clip on your keyboard, and press it down to click it into place. Look for the small hooks on the back of the key and fit them into the small latch hole in the retainer clip. Then, just push the other side of the key down so it clicks in fully.
Steps
Download Article
-
Inspect the back of the key for damage. Turn the key over so you can make sure that the part of the key that latches onto the keyboard is still in place. You should see a small plastic piece that will attach to the keyboard base.- There are a variety of laptop keyboards available, which means the reattachment steps may be a little different than these steps, but they shouldn't be too different that you can't follow along. These steps work with HP Pavilion notebooks as well.
- If the key is broken or loose, there are different ways to repair it including using a tweezer and cleaning your keyboard .
- It can help to inspect the key with your phone camera (by using it as a magnifying glass).
-
Check your keyboard to make sure the base is intact. In order for your key to reattach and work, the keyboard base must still have its parts. Look to see if the rubber nub in the center is still there, as well as the small metal or plastic hooks that will hold the key.Advertisement -
Replace the retainer clip. The retainer bracket is made up of two separate pieces that fit inside each other and is usually clear or opaque white. It could still be attached to either the base or the key. [1] X Research source- First, if the retainer clip has separated into two pieces, you'll need to fit the smaller piece back inside of the larger piece by aligning the hooks. The inner piece should easily snap into place once the clips are properly aligned. It may be easier to remove the base U-shaped piece from the keyboard in order to attach the O-shaped piece of the retainer if they are separated.
- Line up the assembled retainer bracket with the key base on the keyboard. Look at the keyboard base to see how the retainer bracket matches up to the base, and then click the retainer bracket back into place.
- If you're having a hard time fitting the retainer back onto the keyboard, you may be able to remove the round pad at the center. Lift it gently from the base, attach the retainer, and then press it back into the center of the key once the retainer is fitted.
- If you don't immediately see the plastic piece that connects with your key, check if that piece is still connected to the underside of your key. If you still can't find it, look around your work area or anywhere it might have fallen. This piece keeps your key in place and is necessary to continue.
-
Hook the side of the key with the latch into place first. Your keyboard may have metal or plastic hooks, and these need to slide into the respective loops or holes to keep the key in place. [2] X Research source -
Push the other side of the key into place. After you fit the key onto the hook, gently press down on the other side of the key. You should feel it snap back into place, and you may hear a click. -
Press up and down on the button to make sure it holds. Test the key by pressing it several times to see if it is securely in place. The key should have a bounce to it. [3] X Research source- If you have a desktop computer, the keys on those keyboards are different. Refer to How to Reattach a Desktop Mechanical Keyboard Key instead.
Advertisement
Community Q&A
Search
-
Questionmy w key recently came off, because I game a lot and I use it the most and the bottom part wont come back on, like it literally wont click back on.This answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.wikiHow Staff EditorStaff AnswerCheck the underside of the key for damage. There should be 1 or 2 brackets on the bottom that help your key stay on your keyboard. If they are broken, you'll need a new keycap.
-
QuestionWhat should I do if it doesn't pop up when it's clicked?Thomas HoutermanCommunity AnswerThat would indicate that the installation of the mechanical mechanism has failed to properly engage with the internal bracket part. Carefully and gently try to "lift" the key by sliding the tip of a knife under it and slowly move it up and down at eye level to see if it is correctly fitted.
-
QuestionCan it damage your laptop?Thomas HoutermanCommunity AnswerNo, replacing keyboard keys (following the suggested steps in this article correctly) will not result in any damage to the laptop. However, the particular key's recoil mechanism can very easily be damaged during removal of the old key as well as during the reassembly of the new key. In particular, on the little plastic plate that functions as a rocker underneath every key (see manual images for reference). The tiny tabs that form the hinge points (also the tabs that interlock with the keyboard base plate), are extremely delicate and take very little force to snap off the bracket, leaving you with no other option than to accept the missing key or replace the entire keyboard.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Video
Tips
- If you are trying to fit the spacebar on your Dell laptop, there is also a long U-shaped metal wire. Two ends of the wire go into their slots, and then you can pop back the spacebar key on top of the frames (i.e. the two sets of frames for the spacebar).Thanks
- If you break any of the plastic parts on an often used key, you can harvest spare parts from a seldom used key. Just be very careful when taking the key's plastic parts off.Thanks
- For a Latitude D800, this works slightly differently. The best tip is to carefully remove another key as well and peek at how to do it.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warnings
- Make sure that you don't scratch the board underneath the key on some models.Thanks
- Doing this might void your warranty.Thanks
Advertisement
References
About This Article
Thanks to all authors for creating a page that has been read 1,012,756 times.
Advertisement
