Download Article
Download Article
Drywall is a revolutionary (and cost-effective) building material, but its also prone to things like water damage and, worse, mold. A mold problem is never a fun time, but luckily there are a couple handy ways to banish those pesky spores from your drywall before they become too out of control. We'll show you how to handle mold problems on coated, painted, and unpainted drywall to keep your home safe and clean.
Things You Should Know
- Spray the mold with a mixture of 1 part baking soda and 5 parts water for a mild cleaner.
- Spray the mold with straight vinegar for a stronger cleaner, or a mixture of equal parts vinegar and water.
- Combine a small amount of detergent with water to make a gentle cleaning agent.
- Dilute 1 part bleach with 3 parts water to make a powerful, mold-killing spray.
Steps
-
Choose a cleaning agent. Cleaning agents range from mild to potent and include both natural and chemical alternatives. If you have small children or pets in your home, you may want to consider a milder, natural solution over a powerful chemical one. If you have a more advanced mold problem, a stronger chemical may be necessary.
- Combine one part baking soda with five parts water. Baking soda is the mildest, safest cleanser available that is commonly used against mold.
- Use straight vinegar
or vinegar mixed in equal parts with water. [1]
X
Expert Source
Mike Kapur
Certified Mold Assessor & Home Inspector, Sonic Home Inspections Expert Interview. 19 August 2020. Vinegar is a little stronger than baking soda but it is still natural and safe to use around children and pets. - Try an unscented detergent . Since one of the easiest ways to identify the presence of mold is by smell, using an unscented detergent guarantees that no other smells will interfere with your ability to detect the smell of mold. Detergents are still relatively safe to use around kids and pets even though they are a chemical product. Combine the detergent with a small amount of water.
- Use diluted bleach
. [2]
X
Expert Source
Mike Kapur
Certified Mold Assessor & Home Inspector, Sonic Home Inspections Expert Interview. 19 August 2020. Some sources recommend the use of bleach while others do not. Objections to bleach are primarily due to how harsh it is and how potentially harmful it can be to breathe in. Some also believe that its effectiveness is not reliably consistent. Nonetheless, it still remains one of the strongest cleaners effective against mold and safe for painted drywall. Mix one part bleach with three parts water. [3] X Research source
-
Keep the room well ventilated. To remove mold, you may need to work with chemical cleaners. Many of these cleaners can be harmful if inhaled and, as a result, you should keep the doors and windows open as you work. Never direct a fan of any kind into the room or you will spread the spores everywhere! A fan may be placed in windows facing outward to push bad air outdoors. You should seal off doors with plastic to avoid spreading the mold spores in other areas of the house. [4] X Trustworthy Source United States Environmental Protection Agency Independent U.S. government agency responsible for promoting safe environmental practices Go to sourceAdvertisement
-
Protect the surrounding area. To prevent potential damage that could result if you accidentally spill chemicals or cleaners, protect anything that you do not plan on working with directly. Remove furniture and decorations to the other side of the room or out of the room completely. Cover the floor with newsprint or plastic drop cloth and tape the coverings taped in place. Keep an old rag on hand to catch any spills as you notice them.
-
Add the cleaning solution to a spray bottle. Pour the cleansing agent and water into a spray bottle and shake to combine. Make sure that the solution is thoroughly combined to ensure effectiveness. [5] X Research source
-
Spray a small amount of the solution onto the mold. Do not drench the area, since additional moisture can actually increase the mold problem rather than getting rid of it. Spray to mold once or twice over, making sure that each area has been covered with the solution but without using so much solution that it begins dripping off.
-
Scrub the area with an old toothbrush. A dish sponge with an abrasive side can also work. Scrub the area until you no longer see any discoloration or visible mold. [6] X Research source
-
Dry the area out. Since mold can start developing if you leave the area moist, point an electric fan on the spot to help it dry out faster. [7] X Trustworthy Source Centers for Disease Control and Prevention Main public health institute for the US, run by the Dept. of Health and Human Services Go to source
-
Apply a stain-blocking paint. If some mild staining still exists even after you have removed the mold, use a stain-blocking primer and paint to mask it.
Advertisement
-
Cover the area with plastic sheeting. As you work, mold spores could break free from the drywall. To prevent them from finding their way into the flooring, cover the flooring and anything in the surrounding area with plastic sheeting. Tape the sheeting in place. [8] X Research source
-
Mark the areas of the wall that have mold. Use a pencil to lightly draw a box around every area with visible mold. The area should be 5-6 inches larger than the stain itself and should span an area that extends over at least two wooden wall beams behind the drywall. Removing more wall than necessary will increase your odds of removing unseen mold spores and will also make it possible to replace the section of drywall.
-
Cut the area out with a utility knife. [9] X Expert Source Mike Kapur
Certified Mold Assessor & Home Inspector, Sonic Home Inspections Expert Interview. 19 August 2020. Saw along the line with your knife, pointing it out and away from you as you work. When the patch of drywall comes free, carefully remove it and set it down, mold-side up, on the plastic. -
Clean the inside of the room with a HEPA (High Efficiency Particulate Air) vacuum. Mold spores may have been stirred up during the process, but using a HEPA vacuum should remove them. [10] X Research source
-
If your mold spot has appeared by a door or window, while the inner wall is open have someone spray water on the door or window with a hose and monitor for any moisture coming in. Sometimes it can take 5 minutes of spraying with water before any leak will show itself. Once located, seal from both the outside and inside to prevent moisture coming in (again mold is only caused where there is moisture).
-
Before replacing the drywall, it is recommended to paint the interior wall cavity with an elastomeric paint like Kilz, and also paint the backside of the drywall you are replacing. Cut a new section of drywall. Use a tape measure to measure the hole and, using a utility knife, cut a piece of fresh drywall that fits the exact same measurements. [11] X Research source
-
Fit the new piece of drywall in the hole. It should be a tight, snug fit.
-
Secure the new section of drywall. Use drywall screws and a screwdriver to attach the drywall to the wooden beams in the wall behind it.
-
Apply joint compound. Joint compound, also called drywall compound, should be applied to the perimeter of the new section of drywall to help join it with the rest of the wall and to seal any cracks in between the sections. [12] X Research source
-
Smooth the joint compound after it dries. After 24 hours have passed, you can use sandpaper or a gentle sander to smooth the dried joint compound out. [13] X Research source
-
Vacuum the entire area with a HEPA vacuum. Mold spores could have landed on surrounding wall or flooring, even with the plastic coverings in place. Remove as much as possible with a HEPA vacuum.
Advertisement
Expert Q&A
Search
-
QuestionHow do you kill mold inside drywall?Mike Kapur is a home inspector and the owner of Sonic Home Inspections, a home inspection company in Westchester, New York. With over 15 years of experience in pre-inspecting properties, Mike specializes in mold, radon, asbestos, lead, water, and air quality testing as well as hazardous materials, pest, infrared, and general home inspections. Prior to founding Sonic Home Inspections, Mike worked pre-inspecting apartments. Mike holds a BS in Accounting from Queens College and is a Certified Mold Assessor in the state of New York.Unfortunately, you won't be able to fully remove all the mold once it has gotten into drywall. I recommend. you cut out the stained area along with a margin of 5 to 6 inches. Then, just replace the area with a new sheet of drywall.
-
QuestionWhat if the mold is inside the walls and I can't see it?Community AnswerIt very well may be. Scrubbing the mold is not good advice. It spreads the mold spores, and if you are using bleach, will not eliminate all of the mold. The water used will actually make the mold worse. The drywall needs to be carefully removed and disposed of and all of the areas behind the wall must be treated or removed.
-
QuestionWhat are the health hazards of living with mold behind the walls?Community AnswerYou can develop respiratory issues and chronic headaches. It can be very dangerous for athsmatics and young children.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Warnings
- Always wear protective gear when removing mold. Use a disposable dust mask to prevent yourself from breathing in too many of the mold spores. Wear safety goggles and household rubber gloves to protect your eyes and skin from both the mold and any chemicals you use to remove it.Thanks
- Seek professional help for problems you cannot address on your own. Black mold is especially toxic and should be handled by professional. For other types of mold, if the mold extends throughout a large portion of your drywall, you will likely need professional help to fix the problem. Professional mold removal services may also be necessary if you have a damp house, if a family member suffers from respiratory problems, or if the mold continues to come back or spreads.Thanks
Advertisement
Things You’ll Need
- Plastic drop cloth
- Spray bottle
- Baking soda
- Vinegar
- Detergent
- Bleach
- Toothbrush or sponge
- Electric fan
- Pencil
- Utility knife
- HEPA vacuum
- Drywall
- Drywall screws
- Screwdrivers
- Joint compound
- Sandpaper
References
- ↑ Mike Kapur. Certified Mold Assessor & Home Inspector, Sonic Home Inspections. Expert Interview. 19 August 2020.
- ↑ Mike Kapur. Certified Mold Assessor & Home Inspector, Sonic Home Inspections. Expert Interview. 19 August 2020.
- ↑ https://www.nhrmc.org/blog/2018/10/mold
- ↑ https://www.epa.gov/sites/production/files/2016-10/documents/moldguide12.pdf
- ↑ https://www.nhrmc.org/blog/2018/10/mold
- ↑ https://www.shsu.edu/dept/residence-life/maintenance/mildew/
- ↑ https://www.cdc.gov/mold/stachy.htm#Q1
- ↑ https://www.doh.wa.gov/Portals/1/Documents/4300/Mold.pdf
- ↑ Mike Kapur. Certified Mold Assessor & Home Inspector, Sonic Home Inspections. Expert Interview. 19 August 2020.
About This Article
Article Summary
X
To remove mold from painted drywall, start by opening the windows in the affected room to help ventilate it. If your mold problem isn’t too bad, combine 1 part baking soda and 5 parts water to make a mild cleaning agent. If you need a stronger cleaner, try mixing 1 part vinegar to 1 part water, or use an unscented detergent. Then, put the solution into a spray bottle and spray it onto the mold. Take care not to spray too much, since excessive wetness can worsen your mold problem. Once you’ve applied the cleanser, scrub the area with an old toothbrush until you can’t see any more discoloration. After you’ve cleaned the area, point an electric fan at it to help it dry out, which will reduce the chances of mold returning. For tips on how to get rid of mold on unpainted drywall, keep reading!
Did this summary help you?
Thanks to all authors for creating a page that has been read 575,021 times.
Reader Success Stories
- "Thank you for the information. I was going to redo the whole restroom of the house I am moving to. Now I will try to clean it, pray over it, and bind and cast out mold. My other house was 10 years older and never had mold. I always kept the restroom well ventilated, with the door open. Your information was very helpful. Blessings." ..." more
Advertisement
93%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"Thank you for the information. I was going to redo the whole restroom of the house I am moving to. Now I will try to clean it, pray over it, and bind and cast out mold. My other house was 10 years older and never had mold. I always kept the restroom well ventilated, with the door open. Your information was very helpful. Blessings."
..."
more
"The description of how to was just enough without missing bits or going on. Basic and straightforward. Thank you, it really helped."
..."
more
"Provided information on the difference between painted and unpainted drywall and on what type(s) of solution to use. "
..."
more
"The article provides very helpful information on how to clean mold stains on a drywall. I recommend it!"
"I needed info on using bleach and how much to mix with water. The safety tips were also very helpful."
