How to Remove Wallpaper Paste

PDF download Download Article
PDF download Download Article

You've done the hard job of stripping the wallpaper from your walls, but there's still a big step to take before you can paint them. The sticky paste that was used to adhere the wallpaper to the walls is typically made from modified starch or methyl cellulose. If the paste is not removed prior to painting, the paint may flake, rub off or have an uneven appearance. Use these tips to remove wallpaper paste from walls.

Part 1
Part 1 of 2:

Preparing to Wash the Walls

PDF download Download Article
  1. The job can get pretty messy, so it's a good idea to cover the floors and other parts of the room before you get started. If everything's already protected because you just stripped your wallpaper, all the better.
    • Tape off and cover outlets, switches, vents, baseboards and trim with painter's tape or plastic covers. [1]
    • Cover floors with plastic or canvas tarps near all walls where you will be working. A disposable drop cloth is the best, as it will catch any loose scraps, and once you are done, you can just wrap it up and put to the garbage. [2]
    • Remove or cover furniture with plastic tarps. If your room is large, move furniture to the center of the room while you work. [3]
    • Turn off the electricity to the room to avoid any electrical mishaps. [4]
  2. The process of removing wallpaper paste is as follows: soak the paste, rub the paste, then rinse the wall. [5] That means you'll need several different items to do the job:
    • A bucket filled with wallpaper paste removal solution. [6]
    • A sponge for soaking the paste.
    • A spray bottle filled with water.
    • A dry rag for wiping the wall clean (you'll probably need more than one of these to do the whole job).
    • A garbage can.
    Advertisement
  3. Hot water alone won't do the trick - you'll need a solution that softens the paste, making it easier to remove from the walls. There are a variety of solutions you can use for the job: [7]
    • Hot water and a few squirts of dish soap. This works perfectly well on most wallpaper paste. Fill up a gallon-sized bucket with the solution.
    • Hot water and vinegar. This is great for tougher jobs. Mix a gallon of hot water and a gallon of white distilled vinegar.
    • Try adding 1 to 2 tablespoons (14.8 to 29.6 ml) of baking soda into the bucket. The baking soda helps to dissolve the wallpaper paste. [8]
    • Trisodium phosphate, or TSP. TSP is an industrial-grade cleaner that was once widely used as a cleaner. Is it extremely strong, but not great for the environment, so try using when other, gentler methods have been exhausted. [9]
    • For the heaviest jobs, you might want to buy wallpaper paste remover from the store. The commercial removers use chemicals to quickly dissolve the paste. Follow the directions to mix commercial wallpaper paste remover. It is available from most paint or hardware stores, and contains ingredients created specifically to dissolve wallpaper paste.
  4. Wallpaper paste can contain chemicals that aren't great for your hands. The job of removing it can take several hours, so it's a good idea to protect yourself by putting on a pair of long rubber gloves, the type you'd use when washing dishes.
    5. Advertisement
Part 2
Part 2 of 2:

Soaking and Wiping the Walls

PDF download Download Article
  1. Dip the sponge into the wallpaper paste removal solution you mixed up. Apply the solution to the wall, soaking it entirely. [10] Don't soak the entire wall at once; do a 5 x 5 foot section at a time, so it won't dry before you can get to it. Let the solution sit for a few moments so it has time to soften the paste. [11]
    • If you don't want to use a sponge, you can use a spray bottle. Pour the solution into the bottle and spray a 5 x 5 foot area with the wallpaper paste remover. Wait 5 minutes for the paste to soften.
    • Adjust the spray nozzle so it does not squirt directly on the wall, but it sprays a fine mist. Gradual saturation is necessary when spraying the wall.
  2. Use the sponge to rub in a circular motion until the softened paste starts to come off. Discard it in the garbage can as you remove it.
    • Scrape the wallpaper paste with a putty knife [12] if you have trouble getting it off with a sponge. Scrape using even motions that do not cause your putty knife to damage the drywall.
    • If the paste doesn't seem to be budging, soak it thoroughly and try again.
  3. Soften and scrape the wallpaper paste throughout the room until most of the wallpaper paste is gone. [13] Do so methodically, section by section, so you're less likely to miss any one area.
  4. Soak any remaining wallpaper paste with more spray mixture, and scrub it with a tough scrubber. Forceful scrubbing may be required to remove it.
  5. Remove the tape and covers from vents, outlets, switches, baseboards and trim. Use a sponge and the spray remover to carefully treat small areas.
  6. Run your hand along the walls. If they are smooth, most of the glue has been removed. If they feel sticky, repeat the process.
    7. Advertisement


Community Q&A

Search
Add New Question
  • Question
    I'm down to the drywall. Is there anything that I can put on the walls to cover up the flaws and make them smooth enough to paint?
    Community Answer
    Sure, use sheetrock compound. Fill all the holes, making the surface as smooth as you can. When totally dry, use a medium grit sandpaper over the wall. Be sure to wipe it down with a damp cloth to remove all the dust. When dry, apply two coats of latex primer. Then you are good to paint.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 6 Helpful 9
  • Question
    Can I sand the walls to remove excess paste?
    Community Answer
    The short answer is "No." You really need to use the general process outlined above. First, get the old wallpaper off. Then, wash the walls with one of the mixtures noted above and rub down the wet walls with towels. I usually use a scraper first -- you will be amazed at the amount of old paste/glue you will get -- and then finish with a damp sponge. Sanding your walls could damage them or make them rough and unsightly.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 9
  • Question
    How do I remove heavy back wallpaper with a putty coating?
    Community Answer
    Using a wide putty knife blade, 4-6 inches wide, remove the wallpaper from underneath, sliding the knife upward. It's a lot of work, but it will come off. If the paper is not too layered, you could also soak the wallpaper first. It then will peel off easier. It's a mess, but the process does work.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 5 Helpful 9
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • If you're using a steamer to strip the paper simply go over the bare walls again once you've stripped the paper, and use the steamer to soften the same residual paste. Then scrape and wipe as described.
        Thanks
        Helpful 2 Not Helpful 0
      • Don't gouge drywall when attempting to remove stuck-on wallpaper paste. Use care when using the putty knife.
        Thanks
        Helpful 10 Not Helpful 16
      • Shake off the removed glue from your putty knife into a bucket. Allow the removed glue to dry and take it out with your trash for disposal.
        Thanks
        Helpful 8 Not Helpful 12
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      • Water
      • Wallpaper paste remover solution (commercial or using vinegar or dish soap)
      • Bucket
      • Sponge
      • Clean cloths
      • Spray bottle
      • Steel wool
      • Putty knife
      • Painter's tape
      • Tarps


      You Might Also Like

      How to
      Sugar Soap Walls
      How to
      Fix Wallpaper
      How to
      Remove Wallpaper
      How to
      Remove Wallpaper from Drywall
      How to
      Remove Wallpaper That Has Been Painted Over
      How to
      Clean Wallpaper
      How to
      Measure for Wallpaper
      How to
      Wallpaper a Room
      Advertisement

      References

      1. ↑ https://www.architecturaldigest.com/story/how-to-remove-wallpaper-glue
      2. ↑ Mike Katona. DIY Home Improvement Specialist. Expert Interview. 25 August 2021.
      3. ↑ https://www.familyhandyman.com/walls/the-best-way-to-remove-wallpaper/
      4. ↑ https://www.familyhandyman.com/walls/the-best-way-to-remove-wallpaper/
      5. ↑ https://www.weekand.com/home-garden/article/remove-wallpaper-glue-residue-18009991.php
      6. ↑ Katherine Tlapa. Interior Designer. Expert Interview. 22 May 2019.
      7. ↑ https://www.architecturaldigest.com/story/how-to-remove-wallpaper-glue
      8. ↑ https://www.architecturaldigest.com/story/how-to-remove-wallpaper-glue
      9. ↑ https://todayshomeowner.com/walls/video/how-to-remove-wallpaper/
      1. ↑ https://www.familyhandyman.com/walls/the-best-way-to-remove-wallpaper/
      2. ↑ Katherine Tlapa. Interior Designer. Expert Interview. 22 May 2019.
      3. ↑ https://www.thisoldhouse.com/ask-toh/removing-wallpaper-plaster-walls
      4. ↑ Katherine Tlapa. Interior Designer. Expert Interview. 22 May 2019.

      About This Article

      Article Summary X

      To remove wallpaper paste, first make a removal solution by mixing hot water and a few squirts of dish soap in a bucket. For tough wallpaper paste, you can use equal parts hot water and white vinegar instead. Once you've prepared the solution, use a sponge to apply it to a small section of the wall so it's completely soaked. Then, let the solution sit for 5 minutes so it can break up the paste. Finally, use the sponge to scrub the paste off and then repeat on the rest of the wall. To learn how to make a stronger wallpaper paste removal solution, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 462,206 times.

      Reader Success Stories

      • Jose Pujol

        Apr 10, 2017

        "Well presented, easy to follow, great. Will make my project easy to do, and my planning excellent. Thank you."
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement