How to Repair Polypropylene

PDF download Download Article
PDF download Download Article

Polypropylene, also known as PP, is a super versatile plastic that’s used in a variety of products such as plastic containers, toys, furniture, car parts, and even medical implants. If something made of polypropylene is damaged or cracked, it can be repaired, but it needs to be done with polypropylene glue. To help you repair your polypropylene, we’ve answered some of your most common questions about the process.

Question 1 of 5:

What is the best glue to use on polypropylene?

PDF download Download Article
  1. Polypropylene plastic is especially difficult to bond with adhesives. The only way to successfully bond the plastic is to use hot melt glue that’s made of polypropylene. Apply a small drop of the glue onto 1 surface and then press it firmly against the surface you want to connect it to. Hold them together until they fully set.
    • Because they can vary, check the packaging of the glue for specific drying times.
    • If you need to hold the 2 surfaces together for a longer time to allow it to fully dry and cure, use a clamp to hold them together.
    2. Advertisement
Question 2 of 5:

Can polypropylene be welded?

PDF download Download Article
  1. You can only weld together similar materials in order to form an effective bond, especially with polypropylene, which is notoriously difficult to bond to other materials. So you can’t simply weld polypropylene to any material. You have to use a specialized polypropylene welding rod to bond 2 pieces of polypropylene together. [1]
Question 3 of 5:

How do you fix a hole in polypropylene?

PDF download Download Article
  1. Take a flat metal plate and attach it to the other side of the hole so it acts as a backing board that will keep the plastic contained when you weld it. Use a clamp to hold it securely in position. [2]
  2. Use a heat gun to warm the polypropylene welding rod so it’s pliable and curl it inside of the hole. Then, hold the heat gun over the plastic to melt it and cause it to expand and fill in the hole. Use a soldering iron to cut off any excess plastic and run the soldering iron over the plastic in the hole to smooth it out. [3]
    • You must use a polypropylene welding rod to create an effective bond that will seal the hole.
  3. Wait until the plastic is completely cool to the touch and hardened. Then, unclamp and remove the metal plate and you’re good to go! [4]
    4. Advertisement
Question 4 of 5:

Will JB Weld work on polypropylene?

PDF download Download Article
  1. JB Weld is an epoxy putty and is super useful for applications like sealing cracks, patching holes, or bonding things together. However, it doesn’t contain any polypropylene which would allow it to effectively bond with and adhere to polypropylene products. [5]
Question 5 of 5:

Does Gorilla Glue work on polypropylene?

PDF download Download Article
  1. It’s a great adhesive for many things, including other types of plastic. But it’s not effective on plastics like polyethylene or polypropylene. Use polypropylene glue instead.
    2. Advertisement


Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • Welding can cause burns and be a fire hazard if it isn’t done properly. Make sure you know what you’re doing and you wear protective equipment.
        Thanks
        Helpful 1 Not Helpful 0
      Advertisement

      You Might Also Like

      How to
      Make Bioplastic
      How to
      Repair Cracks in Plastic
      How to
      Melt Plastic
      How to
      Cut Thick Plastic
      How to
      Mold Plastic
      How to
      Glue Plastic
      How to
      Cut Polycarbonate
      How to
      Restore Black Plastic
      How to
      Adhere Plastic to Wood
      How to
      Restore Sun Damaged Plastic
      How to
      Fix a Crack in a Water Bottle
      5 Easy Ways to Cut Plastic
      A Complete Guide to Reinforcing Plastic
      How to
      Make Plastic
      Advertisement

      References

      1. ↑ https://www.plasticweldingtools.co.nz/how-to-weld-plastics/
      2. ↑ https://youtu.be/jveoSHwxsm8?t=17
      3. ↑ https://youtu.be/jveoSHwxsm8?t=31
      4. ↑ https://youtu.be/jveoSHwxsm8?t=48
      5. ↑ https://northernnester.com/best-glue-for-plastic/

      About This Article

      Thanks to all authors for creating a page that has been read 39,071 times.

      Did this article help you?

      Advertisement