6 Ways to Repair a USB Flash Drive

PDF download Download Article
Scan for errors and repair your USB pen drive Windows & Mac
PDF download Download Article

Is your USB flash drive not working? For software or driver issues, you can scan and repair your flash drive using your PC or Mac's built-in repair utility, which won't harm your files. If your USB drive has corrupt data, you can reformat it—but keep in mind that reformatting will erase all of your files. Finally, if the flash drive has physical damage, you might be able to repair it at home, but it's best to take it to a data recovery professional. This wikiHow guide will teach you simple ways to fix a USB flash drive.

Things You Should Know

  • Try simple fixes first if your USB pen drive has minor physical damage, like wiggling it back and forth or cleaning the USB port.
  • Use the scan and repair features on Windows and Mac computers to fix non-physical damage.
  • As a last resort, format your USB flash drive to restore functionality to it. However, you'll lose all the files on your drive during that process.
Method 1
Method 1 of 6:

Scanning and Repairing (Windows)

PDF download Download Article
  1. The flash drive should fit into one of the rectangular ports on your PC's housing. If you're encountering errors on your flash drive or it won't display your files, you may be able to fix it using your computer's repair feature.
  2. This opens File Explorer on Windows 10 and 11.
    Advertisement
  3. You'll see Properties at the bottom of the menu that appears when you right-click the drive.
    • You may need to click > next to This PC first in order to view the flash drive.
  4. This option is at the top of the Properties window.
  5. You'll see this button at the top of the Tools tab in the "Error checking" section.
  6. You may also need to follow some on-screen instructions during the repair process.
    • For example, you might need to confirm that you want to repair the drive by clicking Scan & Repair .
    • Once the repair is complete, click Close to finish. If your flash drive's problems were driver or software-related, it should work now.
    7. Advertisement
Method 2
Method 2 of 6:

Scanning and Repairing (Mac)

PDF download Download Article
  1. The flash drive should fit into one of the rectangular ports on the side of your MacBook or on the front or back panel of your Mac desktop computer. If you're encountering errors on your flash drive or it won't display your files, you can use this method to scan for and fix errors.
  2. You can do so easily from the Launchpad—just type Disk Utility , then click Disk Utility in the search results. [1]
  3. This is the indented icon below the "External" heading.
    • If you don't see your USB flash drive, click the View menu and choose Show All Devices first. [2]
  4. It's the stethoscope icon at the top of the Disk Utility window.
  5. It's the blue button on the pop-up window. Disk Utility will now scan for errors and repair them as they're found.
  6. If your flash drive's problems were driver- or software-based, it should work now.
    • When you're finished scanning, click the Eject icon next to the drive in Finder, or click and drag the drive to the Eject icon in the Dock.
    7. Advertisement
Method 3
Method 3 of 6:

Reformatting (Windows)

PDF download Download Article
  1. Plug it into one of your desktop or laptop's USB ports.
    • Formatting your USB drive will erase everything that's on it.
  2. This opens File Explorer on Windows.
  3. If you don't see your flash drive, you might need to click > next to "This PC" first. The Format window will expand.
  4. Use the drop-down menu below "File System" to select a file system to reformat the drive in. Your options are as follows::
    • NTFS - The default Windows operating system format. This format only works with Windows.
    • FAT32 - The most widely compatible format. Works on Windows and Mac but has a storage limit of 32 gigabytes.
    • exFAT (Recommended) - Works on Windows and Mac and has no storage limit.
    • If you've formatted your drive before and you're positive that it isn't broken, you can also check the Quick Format box.
  5. Doing this will cause Windows to begin formatting your flash drive for you.
  6. Your flash drive has successfully been formatted.
    7. Advertisement
Method 4
Method 4 of 6:

Reformatting (Mac)

PDF download Download Article
  1. Plug it into one of your Mac's USB ports.
    • If your Mac doesn't have a USB port, you can purchase an adapter.
    • Formatting your drive will erase everything that's on it.
  2. You can do so easily from the Launchpad—just type Disk Utility , then click Disk Utility in the search results.
  3. It's on the far-left side of the Disk Utility window.
    • If you don't see your USB flash drive, click the View menu and choose Show All Devices first.
  4. You'll see it at the top of the window.
  5. Use the space next to "Name" to type a name for the drive once it is done formatting.
  6. Use the drop-down menu next to "Format" to select a file format. This will bring up a drop-down menu with the following options:
    • Mac OS Extended (Journaled) - The default Mac format. Only works on Mac.
    • Mac OS Extended (Journaled, Encrypted) - Encrypted version of the default Mac format.
    • Mac OS Extended (Case-sensitive, Journaled) - Version of the default Mac format that treats files with the same name differently if there are case differences (e.g., "file.txt" and "File.txt").
    • Mac OS Extended (Case-sensitive, Journaled, Encrypted) - A combination of the three above formatting options for the Mac format.
    • MS-DOS (FAT) - Works on both Windows and Mac computers, but has file size limit of 4 gigabytes.
    • ExFAT (Recommended) - Works on both Windows and Mac computers. Has no storage limit.
  7. This will begin the formatting process. Once the formatting is complete, you'll see an icon for your flash drive appear on your Mac's desktop.
    • When you are finished, click the eject icon next to the drive in the Finder, or click and drag the drive to the Eject icon in the Dock when on your desktop.
    8. Advertisement
Method 5
Method 5 of 6:

Simple Fixes for Physical Problems

PDF download Download Article
  1. It may be the USB port that isn't working rather than the USB drive itself.
  2. If your flash drive's connection head is just a little loose (as in, it doesn't properly connect when plugged in), wiggling it might help it connect long enough for you to copy the files to your computer.
    • Don't use force or excessively bend your USB, as that will cause more damage.
  3. It may not be able to connect to your computer because of an easily-removed blockage. If you see something inside of the USB drive's mouth, gently swab it out with a toothpick or a q-tip.
  4. Any debris, like lint or dust, can clog up the port and make it seem as though your USB stick is broken. Clean the port with a can of air or a tiny non-metal object (like a Q-Tip), or try using a different USB port.
    • If the port looks clean but still doesn't work, try using your flash drive on a different port or computer. If it works, you'll know that something is wrong internally with that specific USB port on your computer.
    5. Advertisement
Method 6
Method 6 of 6:

Soldering a Broken Connector

PDF download Download Article
  1. Unless you have professional experience in repairing physically damaged flash drives, do not try to open it.
    • If the flash drive's internal storage is damaged, your only viable option is to take the drive into a professional repair service.
    • The prices for data recovery can vary from $20 - $850 based on the severity of damage done to the drive, and the type of recovery required.
  2. If you decide you are comfortable risking your files, you will need:
    • A soldering iron with solder and flux
    • An old USB cable
    • Wire cutters/strippers
    • A small flathead screwdriver
    • A magnifying glass or jeweler's loop
  3. Do so with your flathead screwdriver.
  4. If the PCB (the green circuit board) itself is damaged or the solder pads are lifted, you will probably need the help of a professional.
    • Solder pads are the 4 bits of solder that connect the prongs of the USB connector to the copper lines in the circuit board. If the connector has broken away without causing damage to the PCB or solder pads, continue to the next step.
  5. Place the connector end facing toward you and the solder pads facing up.
  6. Make sure you cut the USB end if the flash drive cable is an adapter.
  7. Try to expose about 0.25 inch (0.6 cm) of each of the four wires inside the cable that's attached to the USB cable.
  8. Take your time while doing this, since failing to adequately secure the connection will most likely render your flash drive inoperable.
  9. It should fit into one of the rectangular slots on your computer's housing.
  10. If your flash drive is recognizable by the computer, open it and move your files over onto your computer as quickly as possible:
    • Windows - Open Start , click the File Explorer icon, and click your flash drive's icon.
    • Mac - Open Finder and click your flash drive's icon.
    • If the flash drive doesn't connect to your computer, you can try taking it to a tech department to see if they can still pull the files off of it.
    11. Advertisement

Community Q&A

Search
Add New Question
  • Question
    My pen drive is not showing my folders, but when I am scanning the pen drive, it is then showing the names of folders. What should I do?
    Community Answer
    The files could have been hidden as system files. To show the files, go to folder properties and to the display tab. There you will find the option Show System Files and Show Hidden Files. Check both of them and apply. Your files should be visible now.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 11 Helpful 26
  • Question
    When I try to format my pen drive, my PC shows the message "Windows was unable to format this drive". What is the solution?
    Community Answer
    It is most likely that your pen drive is dead (actually the pen drive's storage may be intact but the boot/power part inside the chip has failed).
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 32 Helpful 81
  • Question
    I have just recently bought a USB storage device. When I plug it into my laptop it makes the sound that it's connected and starts to install, but the folder doesn't show up in My Computer. What can I do?
    Community Answer
    This is similar to a problem I have accessing my mp3 player. I have two cables. Both charge the device but one provides a data connection so that the device is recognized as a drive on the computer, and the other provides no data connection. You could have a cable problem.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 24 Helpful 39
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      • USB drives are cheap and widely available. If the data on the flash drive isn't important, consider just buying a new flash drive.
        Thanks
        Helpful 5 Not Helpful 3
      • If you choose to seek the services of a professional data recovery company, be sure to describe your problems to the best of your abilities to ensure they have the tools and experience for the job.
        Thanks
        Helpful 4 Not Helpful 5
      • If your USB flash drive does contain important data you would like to retrieve, do not re-format the device.
        Thanks
        Helpful 3 Not Helpful 6
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      • Always back up your important information.
        Thanks
        Helpful 5 Not Helpful 0
      • Formatting will erase all data on a drive.
        Thanks
        Helpful 14 Not Helpful 5
      • If the files are at all important, do not let someone who happens to own a soldering iron convince you that they can fix it. Take your drive to a professional repair service.
        Thanks
        Helpful 3 Not Helpful 7
      • Always eject a flash drive before removing it to ensure there is no damage to your files or to the drive itself.
        Thanks
        Helpful 0 Not Helpful 5
      Advertisement

      Things You'll Need

      • Your operating system (restore) disk.
      • Your operating system serial key.
      • A USB flash drive that is working properly for testing/comparing purposes.

      You Might Also Like

      2 Simple Ways to Erase and Format a USB Flash Drive
      Easy Ways to Use a USB Flash Drive
      How to
      Format a USB Flash Drive in Ubuntu
      How to
      Make a Bootable USB Drive on Windows & macOS
      4 Simple Ways to Format and Clear an SD Memory Card
      3 Quick Ways to Permanently Remove Write Protection from an SD Card
      How to
      Save Files to a USB Flash Drive
      A Guide to Disabling Write Protection
      How to
      Reformat an External Hard Drive on Windows or Mac
      How to
      Partition a Thumb Drive
      How to
      Boot from an External Hard Drive
      How to
      Transfer Music to a Flash Drive
      How to
      Add an External Hard Drive
      2 Ways to Test a USB's Speed on a Computer
      Advertisement

      References

      1. ↑ https://support.apple.com/guide/disk-utility/intro-to-disk-utility-dskutl1029/mac
      2. ↑ https://support.apple.com/guide/disk-utility/repair-a-storage-device-dskutl1040/22.0/mac/13.0

      About This Article

      In other languages
      Thanks to all authors for creating a page that has been read 3,333,256 times.

      Reader Success Stories

      • Agus Triyanto

        Nov 20, 2017

        "Your article's good because of the images."
        Rated this article:
      More reader stories Hide reader stories
      Share your story

      Is this article up to date?

      Advertisement