How to Restring a Mandolin

PDF download Download Article
PDF download Download Article

Mandolins have a beautiful and distinctive sound, but their strings can really take a beating while being played. Old strings will change in tone, altering that crisp mandolin timbre. Luckily, replacing old mandolin strings is easy. It only takes a few steps and a little bit of time to make your mandolin sound just like new once again.

Part 1
Part 1 of 4:

Preparing to Restring your Mandolin

PDF download Download Article
  1. You can buy a complete set of 8 strings or buy individuals if you are only wanting to replace specific strings. Different brand strings sound different, so if you like the sound of your current strings, buy the same exact strings. [1] You should be able to find great mandolin strings at your local musical instrument store or from an online retailer.
    • Choose the strings that will be suit your purposes. Remember that a higher price doesn't always mean the strings will be better.
    • Do not use strings for another instrument on a mandolin. Mandolin strings are made specifically for the instrument and thus other strings will not work the same way.
  2. This will help you get through the steps of replacing your strings without confusion.
    • A mandolin at its simplest has only a few basic parts, the body, the neck (which contains the fretboard), the headstock, and strings. The strings are secured onto the mandolin at the top with tuners on the headstock (or peg head) and at the bottom with a tailpiece , as well as being held up off the body by a bridge, located near the sound holes in the middle of the body. [2]
    Advertisement
  3. Have enough room around you so that you can move it around freely.
    • You will also need to have your new strings near by, as well as a pair of wire snippers to clip the ends of the new strings once they are attached. Have these easily accessible.
    4. Advertisement
Part 2
Part 2 of 4:

Removing the First String

PDF download Download Article
  1. Look at the way the old string is wrapped around the post and turn the tuner knob in the direction that will loosen the string.
    • The tuner knob and the post that the string is attached to should rotate in the same direction, so you just need to pay attention to which direction the post needs rotate. [3]
    • Loosen the string quite a bit. It should be loose enough so that there is no tension on it and it can be easily slipped off the hook it's attached to at the bottom of the mandolin.
  2. This cover will be attached to the tailpiece at the bottom of your mandolin. It covers the area where the strings are attached to the tailpiece and protects your forearm while playing. [4] This cover should just pop off the tailpiece by pulling up on it a bit or sliding it down toward the bottom of the mandolin.
  3. The tailpiece at the bottom of your mandolin has at least eight hooks on it, where the strings attach. [5] Mandolin strings usually just have a loop at the end that attaches to one of the hooks on the tailpiece. You will just need to pull the loop off of the hook on the tailpiece to detach the string.
  4. With the other end of the string loose, twist the string off around the post of the tuner and pull the end of it out of the hole in the middle of the post. [6] The string should come off easily.
    5. Advertisement
Part 3
Part 3 of 4:

Attaching the First New String

PDF download Download Article
  1. Be sure you are attaching the correct string, one that matches the one you just removed.
    • Once hooked on, keep the string taut so that it doesn't come off the hook.
  2. Make sure that the string is seated properly in the bridge and the nut, which is located at the top of the fretboard. These two pieces hold the string centered in place, as well as off the surface of the body and fretboard. [7]
  3. This is a small hole but should fit the string easily.
  4. You want to lock the string in place, so put a kink in it right where it comes through the hole in the post. Then wrap the string around the post, locking it in place. [8]
  5. You do not need to tune it yet, just make sure the string is taut and won't slip out of place.
    • Check once again the string is seated correctly in the bridge and the nut. If not, loosen the string slightly then hold the string in place while you retighten it.
  6. Simply clip the string as close to the post as you can, making sure not to knick any other strings in the process.
    7. Advertisement
Part 4
Part 4 of 4:

Finishing String Replacement

PDF download Download Article
  1. Remember, it's best to remove one string and then immediately replace it, instead of taking them all off at once.
    • Removing a single string, and then immediately replacing it, allows you to keep track of your strings, making sure that you are replacing each string with the same type.
    • Another reason for this is that the bridge and the tailpiece of your mandolin may be held on solely by pressure from the strings and thus may fall off if all the strings are removed. It's simply easier to keep them in place than to put them back in place. [9] If you take off all the strings and your bridge or tailpiece fall off during string replacement, don't be surprised or worried. You will just need to put them back in place while you attach the new strings.
  2. Because new strings will stretch out naturally, forcing you to retune repeatedly, you can speed up this process by intentionally stretching new strings out a bit when you put them on. This should be done by over tightening them just a little bit. Be careful not to break them, especially the thin ones they are more delicate.
    • After they are just a bit overtightened, leave them to stretch out for at least 5 hours.
  3. Tune your mandolin and enjoy.
    4. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Warnings

      • If you stretch the strings too tight, you can risk damaging the mandolin or breaking the strings. Be careful, as this could possibly hurt you or your instrument.
        Thanks
        Helpful 4 Not Helpful 1
      Advertisement

      You Might Also Like

      How to
      Tune a Ukulele for Beginners
      How to
      Tune a Mandolin
      4 Simple Ways to Perfectly Tune Your 12-String Guitar
      How to
      Play the Jew's Harp
      How to
      Play the Ukulele
      How to
      Play Mandolin
      How to
      Play the Cello
      How to
      Play the Harp
      How to
      Read Ukulele Tabs
      How to
      Use Tuning Forks
      How to
      Play the Erhu
      How to
      Tune Your Lap Harp to a Major Scale & More
      How to
      Play a Banjo
      What the Difference between a Bass and a Cello? The Answer Is in the Music
      Advertisement

      References

      1. ↑ http://www.mandolinmania.com/strings.html
      2. ↑ http://banjolin.co.uk/mandolin/anatomy.htm
      3. ↑ http://www.lutherie.net/mandolin.gear.direction.html
      4. ↑ http://www.frets.com/FretsPages/Musician/Mandolin/MandoString/mandostring1.html
      5. ↑ http://banjolin.co.uk/mandolin/anatomy.htm
      6. ↑ https://www.youtube.com/watch?v=q2Hk34p2OBA
      7. ↑ http://www.mandolinmania.com/familiar.html
      8. ↑ https://www.youtube.com/watch?v=q2Hk34p2OBA
      9. ↑ http://www.frets.com/FretsPages/Musician/Mandolin/MandoString/mandostring2.html

      About This Article

      Thanks to all authors for creating a page that has been read 82,087 times.

      Reader Success Stories

      • Lisa Aruca

        Mar 24, 2018

        "Haven't played a mandolin in almost 40 years. Needed a quick refresher on changing the strings. Excellent and ..." more
      More reader stories Hide reader stories
      Share your story

      Did this article help you?

      Advertisement