PDF download Download Article PDF download Download Article

Flushing an item down the toilet is a frustrating, worrisome, and all too common accident. Thankfully, most toilet drains are made to only allow water to pass through, so items will usually get caught in the drain or at the bottom of the toilet. To retrieve the flushed item, you can try fishing the item out of the toilet bowl or drain with your hands, a wire clothing hanger, or a drain snake. If you are unable to fish the item out, you might be able to suck the item up with a wet vacuum, or find the item inside the toilet by removing the toilet from the ground and laying it on its side.

Method 1
Method 1 of 3:

Fishing the Item out of the Bowl or Drain

PDF download Download Article
  1. If you can still see the item after it was flushed, you may be able to retrieve the item by sticking your hand in the toilet, grabbing ahold to the item, and pulling it out. [1]
    • To make this process as sanitary as possible, put on a pair of elbow-length rubber gloves before sticking your hand in the toilet.
    • If there is a lot of water in the toilet bowl, it may be easier to reach the item if you use a disposable cup or container to scoop out some of the water first.
    • Make sure that you wash your hands and the item thoroughly after retrieving it from the toilet.
  2. First, take a metal hanger and untwist the end that is twisted around the neck of the hanger hook. Straighten the hanger out as much as possible before bending one end into a small hook shape. Then, carefully stick the hook end down the toilet drain and try to grab hold of the item with the hook.
    • When pushing the hook end down the drain, try to gently trace the top of the drain pipe to avoid pushing the item further down. Then, when the hook is down as far as it can go, push it down and gently trace the bottom of the drain pipe as you pull the hook back up. Hopefully, the hook will catch hold of the item on its way out.
    • Depending on how your toilet drain is shaped, you may need to bend the hanger to allow it to bend into the drain pipe.
    • If the item is made of common metal, try pushing a flexible magnetic retriever into the toilet drain and through the toilet trap. However, this won't work on solid gold or silver. [2]
    Advertisement
  3. First, stick the coiled or hooked end of the drain snake down into the toilet drain until you can feel the item or know that you’ve reached the place where it’s resting or lodged. Once you’ve located the item, try to grab hold of the item by pushing the coil or hook slightly past the item, then catching it as you pull the snake back up the drain. [3]
    • If you aren’t sure where the item is and didn’t feel it as you pushed the drain snake down, push the snake down as far as it will go. Then, try to feel around for the item as you slowly pull the drain snake back out.
    • Drain snakes are available online and at most home improvement stores.
    • When choosing a drain snake to use, choose an option that has a coiled or hooked end. This will make it easier for you to grab ahold of the item.
  4. Advertisement
Method 2
Method 2 of 3:

Using a Wet Vacuum

PDF download Download Article
  1. First, remove the top of the vacuum’s collection tank. Then, following the instructions for your particular vacuum model, remove the dry dust bag and filter from the collection tank. This will keep both the dust bag and filter from getting wet and growing mildew over time. [4]
    • After removing the dry dust bag and filter, put the top back on the collection tank.
  2. Plug in the vacuum cord and turn on the vacuum. Then, hold onto the hose of the vacuum and direct the end of the hose into the toilet. Push the hose as far down the drain as possible. [5]
    • You may feel or hear the item move as you push the hose down. If so, direct the end of the hose so that the opening points at the item.
  3. Turn the vacuum on to start sucking up the toilet water. Keep sucking up the water until you hear the object pass through the hose, or until the collection tank is full. [6]
    • Some wet/dry vacuums have a separate setting when vacuuming water, so make sure that you turn your vacuum on accordingly.
  4. If you heard or saw the item go through the vacuum’s hose, or if the collection tank is starting to get full, turn the vacuum off. Then, remove the top of the vacuum’s collection tank and look into the tank to see if the item was sucked up through the hose. If you see the item, you can retrieve it with your hands, a shovel, or any item with a scoop or hook on the end. [7]
    • If you don’t see the item in the collection tank but you suspect that it was sucked up, check the vacuum’s hose as well. The item may have gotten lodged in the hose.
  5. If the item is not in the collection tank or hose, it’s likely that it’s still in the toilet. To try again, first empty the water out of the collection tank. Then, put the hose back into the drain and turn the vacuum on again. Keep vacuuming until you hear or see the item get sucked into the hose, or until the collection tank gets full again.
    • You may need to repeat this process a few times before the item gets sucked up into the vacuum.
  6. After you’ve retrieved the item, flush the toilet once or twice. The toilet bowl should refill with water and be ready to use. [8]
  7. Advertisement
Method 3
Method 3 of 3:

Removing the Toilet to Retrieve the Item

PDF download Download Article
  1. First, locate the valve on the side, behind, or towards the bottom of the toilet. Then, turn the valve clockwise several times until it won’t turn anymore. This will turn off the toilet’s water supply, which will help you avoid any flooding and keep the toilet from flushing while you work. [9]
    • If you can’t find the valve or if the valve is stuck in place, you’ll likely need to turn off the water to your house for a short time. In most cases, you can do this by switching off the water supply from the control unit, which is usually located in the basement or an interior closet.
  2. Most toilets have a water tank in the back behind the bowl that has a removable lid. Carefully lift the lid to remove it from the tank and set it aside. This will allow you to easily access the inside of the tank, and will help keep the lid from falling off or getting crack when you remove the toilet. [10]
  3. Using a wet vacuum or small container, vacuum or scoop out all the water from both the tank and the toilet bowl. This will keep any water from spilling or splashing onto you or the bathroom floor, and will make the toilet lighter and easier to lift.
    • You can also use a baster to suction water out of the tank and bowl.
  4. In most cases, your toilet will be connected to the floor by at least 2 bolts or screws. Using either a wrench or a screwdriver (depending on whether your toilet has bolts or screws), unscrew the bolts or screws from either side of the bottom of the toilet. This will disconnect your toilet from the floor and enable you to remove it from the ground. [11]
    • Set the bolts or screws aside in a safe place so you’ll be able to use them later to re-secure your toilet into place.
  5. Locate the large bolt that attaches the water supply line to the back of the toilet’s tank. Then, twist the bolt counter-clockwise until it comes undone and the water line is detached. [12]
    • The water line bolt is usually a large plastic bolt with ridges to make it easier to grip and unscrew.
  6. In order for you to be able to look up inside the toilet to retrieve the flushed item, you’ll need to lay the toilet on its side. To do this, find a grip on either side of the toilet that feels comfortable and secure. Then, carefully lift the toilet up away from its spot on the ground. Lay it down on its side carefully.
    • Toilets are very heavy, so be sure to lift with your legs, not your back. [13] You may also want to get someone to help you lift the toilet and get it safely down on its side.
    • You may want to lay a towel or blanket down on the ground so that your toilet will be protected when you lay it on its side.
  7. With the toilet is laying on its side, check inside the waste opening to see if you can find and reach the flushed item. If you can see the item, you should be able to reach it with your hands or with any other retrieval device. [14]
    • The inside of the waste opening may be dark, so it can be helpful to have a flashlight on hand to help you see into the toilet.
    • In addition to the waste opening, you may also want to look at the wax ring that runs along the bottom of the toilet, as very small items, such as a piece of jewelry, could’ve gotten caught on the wax ring.
  8. Carefully turn the toilet back upright and lift it back into place. Reconnect the toilet to the ground by twisting the bolts or screws back into the bottom. Then, reconnect the water line and twist the valve counter-clockwise to turn the toilet’s water supply back on. Flush the toilet once or twice to refill the tank and bowel, and then your toilet should be ready to use again.
  9. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you get something back that has been flushed down the toilet?
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Dave Jones is a Professional Plumber and the Midwest Regional Vice President at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a drain service technician at the age of 18. Since then, he has risen through the ranks into positions of increasing authority. Dave served as general manager of Roto-Rooter’s Charlotte, North Carolina, and Atlanta, Georgia branches before being promoted to Contractor Area Manager and later to Regional Vice President. Dave holds Master Plumber Licenses in Pennsylvania, North Carolina, and Georgia.
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Expert Answer
    If you're unable to retrieve the item by yourself, call a plumber who has a video camera snake. Camera snakes allow the operator to push the camera snake through the pipe while watching a video monitor that displays everything in the drainage system in real time.
  • Question
    What do you do when you flushed something down the toilet?
    Dave Jones
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Dave Jones is a Professional Plumber and the Midwest Regional Vice President at Roto-Rooter Plumbing & Water Cleanup. In 1992, Jones joined Roto-Rooter as a drain service technician at the age of 18. Since then, he has risen through the ranks into positions of increasing authority. Dave served as general manager of Roto-Rooter’s Charlotte, North Carolina, and Atlanta, Georgia branches before being promoted to Contractor Area Manager and later to Regional Vice President. Dave holds Master Plumber Licenses in Pennsylvania, North Carolina, and Georgia.
    Master Plumber, Roto-Rooter Plumbing & Water Cleanup
    Expert Answer
    Once the item has gone into the municipal sewer, you probably won’t be able to get it back. If your home is equipped with a septic tank, call a septic tank pumping service and see if they can pump the tank clean and help locate your ring. It’s a longshot, but it’s worth asking.
  • Question
    How do I get my money back after it was flushed down the toilet?
    Community Answer
    There is no way to get your money back if you were unable to pull it out of the toilet before it was flushed.
See more answers
Ask a Question
      Advertisement

      Video

      Tips

      Show More Tips
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You’ll Need

      • Rubber gloves (optional)
      • Wire hanger
      • Drain snake
      • Wet vacuum
      • Flashlight (optional)
      1. Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 13 December 2021.
      2. Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 13 December 2021.
      3. https://thriftdiving.com/how-to-remove-your-toilet-by-yourself/
      4. Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 13 December 2021.
      5. Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 13 December 2021.
      6. Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 13 December 2021.
      7. Dave Jones. Master Plumber, Roto-Rooter Plumbing & Water Cleanup. Expert Interview. 13 December 2021.
      8. https://www.today.com/home/what-do-when-something-falls-toilet-more-plumbing-tricks-t24291

      About This Article

      Article Summary X

      To retrieve an item that's been flushed down the drain, try using a metal coat hanger. First, untwist the hanger and straighten it out. Then, bend one end into a hook shape to reach around the bend and pull the item out. Another way to retrieve an item is with a drain snake. To use one, push the end past the item, and hook it as you pull the drain snake out. You can also use a wet vacuum. First, stick the hose down the drain and turn it on. Then, wait until you hear the item pass through the vacuum hose. For tips on how to get the item back by removing the toilet, keep reading!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 514,602 times.

      Reader Success Stories

      • Chris M.

        Feb 27

        "I moved a toilet over 4 inches. Had to use three way at an angle to allow it to be moved over. Got done. Was very ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement