PDF download Download Article
Quick and simple tips for novice sewers
PDF download Download Article

It's frustrating to finish a sewing project only to find that the corners are round. Not to worry though—in this article, we'll teach you how to sew the perfect corners using two different methods: boxed corners and mitered corners. Boxed corners are great for tote bags, fabric boxes , and cosmetic bags. For most flat projects, such as blankets, napkins, or quilts, mitered corners will be your best bet. Grab your needle and thread and let's dive in!

Method 1
Method 1 of 2:

Sewing Boxed Corners

PDF download Download Article
  1. Keep the fabric inside out and find the corner where you'd like to make the box corner. Use your fingertips to pull apart the fabric at the seam. [1]
    • Your fabric should look like a triangle at the end and the seam should run down its center.
    • Both layers of fabric should now be pointing in opposite directions instead of laying flat together.
  2. Watermark wikiHow to Sew Corners
    Hold the fabric so they stay slightly separated at the seam. Then hold both sides of the fabric and position it so the seam on the edge matches up with the seam on the bottom. [2]

    Tip: To test if the seams line up, insert a sewing pin through the seam on the edge. It should come out through the seam on the bottom.

    Advertisement
  3. Watermark wikiHow to Sew Corners
    If you're following a pattern, it may give you a measurement to follow. For example, if the pattern says to stitch a perpendicular line 1 inch (2.5 cm) from the top of the seam, lay a ruler along the seam. Measure from the tip of the sewing, not the tips of the fabric, and make a mark on your fabric with a pencil. [3]
    • If your pattern doesn't give you a measurement, choose your own measurement. For example, if you'd like a short box, measure only 1 2 inch (1.3 cm) from the top. To make a wide box, measure 2 to 4 inches (5.1 to 10.2 cm) from the top.
  4. Watermark wikiHow to Sew Corners
    Turn the ruler so it's at a 90-degree angle from the seam. Ensure that it passes through the mark you just made. Then use a pencil to draw a line going from 1 side of the fabric to the other. [4]
    • Once you draw the line, it will look like the base of a triangle.
  5. Watermark wikiHow to Sew Corners
    Sew straight stitches across the line. Hold or pin the fabric and take it to your sewing machine. Make a couple of straight stitches onto the line you just marked and do a few backstitches . Then sew straight stitches until you reach the end of the line. Make several backstitches and then sew straight until you get to the end. [5]
    • The backstitches will support the corners. This is especially important if you'll be stuffing the item.
  6. Watermark wikiHow to Sew Corners
    Take a pair of scissors and trim off the extra fabric leaving a 1 4 inch (0.64 cm) seam allowance. Then flip the fabric so it's right side out. Push both of the corners you've just made so the fabric points out. [6]
    • You'll now have a box corner that will give depth and support to your item.
  7. Advertisement
Method 2
Method 2 of 2:

Stitching Mitered Corners

PDF download Download Article
  1. Watermark wikiHow to Sew Corners
    Place the fabric right-side down so the pattern is down. Fold each edge over towards the center of the fabric by 1 4 to 1 2 inch (0.64 to 1.27 cm). Then fold again to make the fold as wide as you want the border to be. [7]
    • You shouldn't see the raw edges of the fabric after you've made the second fold.

    Tip: Use a ruler or fabric measuring tape to ensure that each of your folds are the same size.

  2. Watermark wikiHow to Sew Corners
    Run an iron over the folded edges and open the fabric to see the crease. Place the fabric on an ironing board and slowly press the iron over the edges a couple of times. Then open the last fold you made. The fabric will still have the first fold, but you'll be able to see a definite crease. [8]
    • Ironing will keep the fabric in place and create a crease so you can sew the corners easier.
  3. Watermark wikiHow to Sew Corners
    To create a guideline for sewing the corners, take the width of the border you want and multiply it by 2. Then use a ruler to measure that distance from 1 of the corners and mark the fabric with a pencil. Turn the ruler and mark the other edge for the same corner. [9]
    • For example, if you want a 1 inch (2.5 cm) border, multiply 1 inch (2.5 cm) by 2 to get 2 inches (5.1 cm). Measure and mark a 2 inches (5.1 cm) distance from each corner.
    • If pencil won't show up on your fabric, use a pen.
  4. Watermark wikiHow to Sew Corners
    Take your ruler and place it across both of the marks for your corner. Then use the pencil to draw a line so the marks are connected. Repeat this for each corner you're sewing. [10]
    • This will create a 45-degree angle.
  5. Watermark wikiHow to Sew Corners
    The marks that you made on the sides of the corner should match up and the wrong side of the fabric should be facing up. Then insert a sewing pin to hold the corner together. [11]
    • Remember to do this for each of your corners.
  6. Watermark wikiHow to Sew Corners
    Make a few straight stitches and then back stitch a couple of stitches. Continue to stitch straight across the line that you drew for each corner. Once you reach the end of the line, make a few backstitches and then lift the foot up so you can remove the fabric. [12]
    • Sewing a few backstitches at the beginning and end of the line will prevent the stitches from unraveling.
  7. Watermark wikiHow to Sew Corners
    Use a sharp pair of scissors and cut the extra fabric 1 4 inch (0.64 cm) from the line you just stitched. Cut in a straight line so your corner fabric stays smooth. [13]
    • Ensure that you don't cut too closely to the seam or the stitches might become loose.
  8. Watermark wikiHow to Sew Corners
    Remove the fabric from the sewing machine and turn the corner inside out. The raw edges should be inside and the neat corner should be visible. To make the corner come to a point, insert a chopstick or knitting need and push gently. [14]
  9. Watermark wikiHow to Sew Corners
    Iron the corners to make them lay flat. Although you can use the fabric with the corners right away, it may help to iron the corners for a few seconds. This will ensure that they stay flat.
  10. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    Is it hard to get a perfect corner when you're sewing?
    Seleh Rahman
    Professional Tailor & Furrier
    Seleh Rahman is a Tailor, Furrier, and the Owner of Seleh de Federal Hill in Baltimore, Maryland. With over 45 years of experience, Seleh specializes in fur, alterations, and fashion illustration. Seleh studied Fashion Design and Tailoring at Bay College of Maryland. He holds certifications in fur, design, and tailoring.
    Professional Tailor & Furrier
    Expert Answer
    It's not hard per se, but it does take some experience, calm hands, and a steady eye. The more you practice, the easier it will become! All you have to do is pivot carefully and maintain the same speed when you're rotating the fabric.
  • Question
    What do I do with my foot when I'm rotating?
    Seleh Rahman
    Professional Tailor & Furrier
    Seleh Rahman is a Tailor, Furrier, and the Owner of Seleh de Federal Hill in Baltimore, Maryland. With over 45 years of experience, Seleh specializes in fur, alterations, and fashion illustration. Seleh studied Fashion Design and Tailoring at Bay College of Maryland. He holds certifications in fur, design, and tailoring.
    Professional Tailor & Furrier
    Expert Answer
    At the corner, you want the needle to be inside of the fabric, with your foot lifted up. Then, turn the fabric around to go the other way and keep it going with your foot.
  • Question
    Does a corner have to be L-shaped?
    Seleh Rahman
    Professional Tailor & Furrier
    Seleh Rahman is a Tailor, Furrier, and the Owner of Seleh de Federal Hill in Baltimore, Maryland. With over 45 years of experience, Seleh specializes in fur, alterations, and fashion illustration. Seleh studied Fashion Design and Tailoring at Bay College of Maryland. He holds certifications in fur, design, and tailoring.
    Professional Tailor & Furrier
    Expert Answer
    Not necessarily, but the L-corner is going to be the ideal option if you're at a clean edge.
Ask a Question
      Advertisement

      Video

      Tips

      • Always check your fabric's care guide to determine if you can iron it. If the fabric is delicate, you may need to lay a cloth over the fabric before ironing on the lowest setting.
      • Try both methods to determine which one you prefer using. You might find that mitered or boxed corners work better for some projects than others.
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Things You'll Need

      Sewing Boxed Corners

      • Sewing machine
      • Thread
      • Fabric
      • Scissors
      • Ruler
      • Pencil

      Stitching Mitered Corners

      • Sewing machine
      • Thread
      • Fabric
      • Scissors
      • Ruler
      • Pencil
      • Iron and ironing board

      About This Article

      Thanks to all authors for creating a page that has been read 26,680 times.

      Did this article help you?

      Advertisement