How to Sew Patches on a Leather Vest

PDF download Download Article
PDF download Download Article

Embroidered patches are a great way to make your leather vest stand out from the rest. While you can always pay someone to do it for you, sewing patches onto leather vests is easy. If this is a one-time task, sewing the patch on by hand would be your best option. If you plan to sew on lots of patches, or make a business out of it, consider investing in a leather sewing machine.

Method 1
Method 1 of 2:

Sewing by Hand

PDF download Download Article
  1. Tear off a piece of tape and roll it into a loop with the sticky side out. Place the tape in the back of the patch. This will keep the tape in place as you sew the patch on. You will remove it before you finish sewing the patch. [1]
    • You can use scotch tape or masking tape, but do not use double-sided tape. It will be too difficult to remove.
    • Alternatively, you can lightly mist the back of the patch with spray adhesive.
  2. You can place the patch on the front or on the back. If you are using spray adhesive, you may have to wait a few seconds for the glue to get tacky.
    Advertisement
  3. The benefit of sewing by hand is that you can make a hole in the lining for your hand to fit through. Use a seam ripper to undo the stitching on the lining close to where you placed the patch. Make the hole big enough for your hand to fit through. [2]
    • Skip this step if your vest does not have a lining, or if removing the stitching will ruin it.
  4. Choose clear thread or thread in a color that matches the outer border on your patch. Make sure that the thread is 100% nylon or polyester. Do not use cotton thread of any kind; the tannin in the leather will degrade the cotton over time. Once you thread the needle, knot the thread. [3]
    • Leather needles have a specific point. Rather than having a conical shape, they have a triangular or pyramidal shape.
    • You can find the needles and the thread in craft shops and fabric stores.
  5. Push the needle up through the back of the leather and out through the front of the patch. Try to get the needle just inside the embroidered border of the patch. It does not matter where you start sewing, but it might be easier to start in a corner. [4]
    • Use a thimble. Leather needles are designed to pierce leather. The delicate skin on your finger is no exception.
    • If you weren't able to undo the lining, start sewing from the back of the patch. This way, the knot won't be visible. Keep the lining smooth so that it doesn't wrinkle.
  6. Place the needle on top of the leather, right next to the outside edge of the patch. Push the needle back through the leather, then pull on it to tighten the stitch. You have just completed your first whipstitch. [5]
    • You can also make a running stitch instead by bringing the needle back down through the patch, just inside the border.
    • Whether you choose a whipstitch or a running stitch is up to you. A whipstitch may be visible on the border, but a running stitch may be visible inside the border.
  7. Continue to whipstitch around the patch until you a third of the way done. Keep your stitches tight, small, and close together. [6]
    • Skip this step if you used spray adhesive.
  8. Once you have sewn a third of the patch onto the leather, stop. Slide your finger through the gap under the patch. Hook it around the looped piece of tape, then pull the tape out. [7]
    • Skip this step if you used spray adhesive; there is nothing to remove.
  9. Continue to sew around the patch using the same stitch as before (whipstitch or running stitch). Make your last stitch on the inside of the vest (back of the leather). Knot your thread securely, then snip off the excess. [8]
    • If you didn't undo the lining, knot the thread to the first stitch that you made. Cut the thread as close as possible to the knot.
  10. Knot the end of the thread, and push the needle through the back of the lining and out the front, as close to the folded edge of the seam. Sew the 2 seams together using a ladder stitch . Knot and snip the thread when you are done.
    • Skip this step if you did not undo the lining.
    11. Advertisement
Method 2
Method 2 of 2:

Using a Leather Sewing Machine

PDF download Download Article
  1. A sewing machine that is specifically designed for leather will work the best, but you can try using a heavy duty sewing machine as well. Do not use a standard sewing machine; it is not strong enough.
    • You may be able to find these sewing machines in stores that specialize in leather working tools or sewing machines. You may also be able to find them online.
  2. Fit an 18-gauge needle into your sewing machine. Change the stitch length to the widest that you can find, or something around 1 ⁄ 8 inch (0.32 cm) wide. Thread your sewing machine with 100% nylon or polyester upholstery thread. [9]
    • Do not use cotton thread, as the tannin in the leather will degrade it over time.
    • For best results, use a sharp leather needle.
  3. Shake the can for a few seconds, then hold it 4 to 6 inches (10 to 15 cm) away from the back of the patch. Apply a light, even misting of spray adhesive. Do not use too much, however; you need just enough to keep the patch in place as you sew it. [10]
    • If you can't get any spray adhesive, you can try using rubber cement or a glue stick. Do not use sewing pins, as they will leave behind permanent holes in the leather.
  4. Check the label on the can to see whether or not you need to wait for the glue to get tacky first. Decide where you want the patch to go, then place it onto the leather. Gently press down on the patch until it feels secure.
    • If you need to, use the seams on your leather vest as a reference point.
  5. Sew as close as possible to the embroidered border on your patch. Go slowly around curves. When you hit an angle or a corner, push the needle down, lift the foot, and rotate the vest. Push the foot back down before you resume sewing. [11]
    • If your vest is lined, make sure that you smooth the lining out first.
  6. When you are back to where you started sewing, continue sewing for another 1 to 1 1 ⁄ 2 inches (2.5 to 3.8 cm). This will create a 1 to 1 1 ⁄ 2  in (2.5 to 3.8 cm) long overlap at the start and end of your sewing and prevent unraveling. It also saves you from the task of backstitching, which will only create more work for you. [12]
  7. Lift the needle out of the vest, if needed, and pull the foot up. Slide the vest out from under the foot and cut the thread as close as possible to the lining and the patch.
    8. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      • Plan your stitches carefully. You won't be able to redo your patch, because the holes caused by the stitching are permanent.
        Thanks
        Helpful 1 Not Helpful 0
      • Do not use pins to secure the patch to the leather. They are not strong enough for most leathers, and will leave holes.
        Thanks
        Helpful 1 Not Helpful 0
      • Practice your stitches on a piece of scrap leather, if possible. Sewing through leather is different than sewing through fabric, especially if the leather is thick.
        Thanks
        Helpful 1 Not Helpful 0
      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      Sewing by Hand

      • Leather needle
      • 100% nylon or polyester thread
      • Tape or spray adhesive
      • Scissors
      • Leather vest
      • Embroidered patch

      Using a Leather Sewing Machine

      • Leather/heavy-duty sewing machine
      • 18-guage leather needle
      • 100% nylon or polyester upholstery thread
      • Spray adhesive
      • Scissors
      • Leather vest
      • Embroidered patch

      You Might Also Like

      How to
      Wash a Jacket in a Washing Machine
      How to
      Stop a Jacket from Shedding
      How to
      Shrink Jackets
      How to
      Clean a Letterman Jacket
      How to
      Wear a Denim Jacket (Men)
      How to
      Paint a Leather Jacket
      How to
      Style a Jean Jacket: 10+ Outfit Ideas for Men & Women
      How to
      Style Windbreakers
      How to
      Bleach a Jean Jacket
      How to
      Make a Jean Jacket Look Worn
      Advertisement

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about tailoring clothes, check out our in-depth interview with David Pew .

      References

      1. ↑ http://leathersupreme.com/how-to-put-on-patches-for-leather-jackets/
      2. ↑ http://leathersupreme.com/how-to-put-on-patches-for-leather-jackets/
      3. ↑ http://leathersupreme.com/how-to-put-on-patches-for-leather-jackets/
      4. ↑ http://leathersupreme.com/how-to-put-on-patches-for-leather-jackets/
      5. ↑ http://leathersupreme.com/how-to-put-on-patches-for-leather-jackets/
      6. ↑ http://leathersupreme.com/how-to-put-on-patches-for-leather-jackets/
      7. ↑ http://leathersupreme.com/how-to-put-on-patches-for-leather-jackets/
      8. ↑ http://leathersupreme.com/how-to-put-on-patches-for-leather-jackets/
      9. ↑ https://www.youtube.com/watch?v=8_rBQK7kjUY&feature=youtu.be&t=13s
      1. ↑ https://www.youtube.com/watch?v=8_rBQK7kjUY&feature=youtu.be&t=1m4s
      2. ↑ https://www.youtube.com/watch?v=8_rBQK7kjUY&feature=youtu.be&t=2m3s
      3. ↑ https://www.youtube.com/watch?v=8_rBQK7kjUY&feature=youtu.be&t=2m35s

      About This Article

      Article Summary X

      To sew patches on a leather vest, you’ll need tape, a leather needle, and 100 percent nylon or polyester thread. Before you sew the patch on, place a piece of rolled up tape on the back of the patch so it will stay in place while you sew. Thread your leather needle and knot the end. To make a stitch, push the needle up through the back of the jacket and out through the front of the patch, as near the edge as you can. Then, push the needle back through the leather right on the outside of the patch. Pull the thread to tighten the stitch. Repeat this process, stitching around the edge of the patch until you’re almost done, then carefully remove the tape. Finish sewing the rest of the way around the patch and knot the end of the thread to keep it in place. To learn how to use a leather sewing machine, read on!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 103,255 times.

      Reader Success Stories

      • Chris Baldwin

        Oct 17, 2019

        "Just the info I needed. Thanks!"
      Share your story

      Did this article help you?

      Advertisement