PDF download Download Article PDF download Download Article

Casio watches are nearly ubiquitous, but resizing the metal bands that some of them come with is still a mystery to most. Metal bands aren't one size fits all. If you've upgraded from the rubber watch bands of your childhood to a classic metal band, you'll probably need to know how to resize it.

Part 1
Part 1 of 2:

Measuring Your Wrist and Watch

PDF download Download Article
  1. Before you begin, you'll need to decide what changes you need to make. In most cases you'll be removing links. If the watch is only slightly loose, you'll probably want to leave it as-is.
    • If the watch is too tight, contact Casio. They may be able to send you additional links or send you a watch with an oversize band.
  2. By centering the face of the watch on your wrist, you'll be able to see how much extra slack you have on each side. You will want the watch to be comfortable. Some slack will keep it from pinching you, but the watch will be able to move on your arm with too much slack.
    Advertisement
  3. You can do this using a tape measure if you'd like, but estimating usually works better. For a watch that is slightly too loose you'll want to remove one link. If it is much too loose you'll need to remove two or more.
  4. You will want to get a small nail with a long tip and a high quality, precision flat head screwdriver. The head of the screwdriver will ideally be under 2mm wide. If you have a jeweler's screwdriver, it would be ideal.
    • You may also find it helpful to work over a soft, smooth, and clean surface. A white towel or tee shirt works well. That way if you drop your nail or any of the small parts of the watch they'll be safe and easy to find.
  5. Advertisement
Part 2
Part 2 of 2:

Removing Links

PDF download Download Article
  1. Don't try to remove a link that doesn't have arrows on the underside. The links with arrows are removable links. [1] You'll notice that the removable links aren't near the edges of the band. Also, remember that you want the watch to be centered on your wrist, so you'll need to take links from both sides of the band if you are taking more than one out.
  2. You'll see a small hole on one side of the band. [2] While firmly gripping the watch, tap on the nail head until you see a small peg poke out of the other side of the band. You will also a niche exposed under the arrow.
    • If you look closely, one end of the pins is solid and the other has a faint line through it. You want to tap the solid side.
    • When tapping the solid side you should only need to push it about a quarter of an inch before it slides out.
  3. Gently start sliding the pin down. [3] The pin will usually drop out easily, but if it does not you can use needle-nosed pliers to withdraw it. Catch the pin and gently remove the link if it does not fall off on its own.
  4. [4] Now that you have successfully removed your link(s), you will want to be sure to set them aside, in case you have removed too many links and the watch is now too small.
  5. Carefully align the remaining links. Once the links are aligned, reinsert the pin to close the loop of the band. [5] If you were going to be removing multiple links, proceed with a link from the other side of the watch band.
  6. Try on your watch! If it is still too loose, remove another link. If it is too tight, replace a link. Congratulations. You are now looking sharp with a properly sized Casio on your wrist.
  7. 7
    Adjust the fine tuning. At one end of the clasp there are two holes for attaching the wrist band to the clasp. You can adjust the length for about half-link by moving the point of attachment of the link. Note that the connection is done with a spring pin, which can be extracted by pressing one of the visible ends. Be careful as these pins have the habit of shooting out when liberated from the clasp. Use the flat end of a screwdriver to push the end of the pin into the clasp and guide it into the appropriate hole.
  8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    I re-inserted the pin but it's loose. What now?
    Ron McLean
    Community Answer
    Does it look straight (inserted all the way) when looking at it from the side? If not, it may have missed the far connection.
Ask a Question
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Thanks for submitting a tip for review!
      Advertisement

      Warnings

      Advertisement

      Things You'll Need

      • A high-quality precision set screwdriver under 1.5mm wide;
      • A small nail with a long point
      • A watch
      • Optional: cotton gloves

      Expert Interview

      Thanks for reading our article! If you’d like to learn more about sizing a watch, check out our in-depth interview with Kate Breen .

      About This Article

      Article Summary X

      To size a Casio metal wristband, start by deciding how many links you need to remove for the watch to fit comfortably. In order to remove 1 link, find a link with arrows and tap on the small, solid hole with a long-tipped nail. Continue tapping until a small pin pokes out of the other side, then push the pin out using a flathead screwdriver under 2mm wide. After that, gently remove the link, align the remaining links, and reinsert the pin to reattach the band. For more tips, like how to resize your watch by half a link, read on!

      Did this summary help you?
      Thanks to all authors for creating a page that has been read 316,618 times.

      Reader Success Stories

      • Tom Warfield

        Jul 26, 2017

        "As I've aged, my wrists have gotten skinnier. After paying twice to get the band on my old watch shortened, I ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement