How to Strip Paint

PDF download Download Article
PDF download Download Article

Giving something a fresh paint job is a great way to give it new life. But applying new paint over old paint can cause a variety of problems, including chipping, peeling, and bubbling. To prevent this, sometimes you have to strip the old paint before you can apply a fresh coat. There are a number of ways to strip paint, but the safest and most reliable method is applying a chemical stripper to loosen the bonds, and then scraping and sanding away the paint.

Part 1
Part 1 of 3:

Organizing Your Work Space

PDF download Download Article
  1. Removing paint is a messy business, and if the object you're stripping is small enough, move it to an outdoor or semi-outdoor location before starting. This could be a patio, driveway, outdoor work area, or even an open shed or garage.
    • Moving the item is ideal for small furniture, doors, fixtures, and other portable items. [1]
  2. Sometimes it’s not possible to move the object you're painting, either because the item is too large or not portable, or because the weather won’t allow it. When you can't move the item outside, open windows, open vents, and turn on fans to provide plenty of fresh air in your workspace. [2]
    • This applies when you're working with large and heavy furniture, walls, and other items that cannot be moved.
    Advertisement
  3. Paint stripping requires you to scrape and sand, and this produces a lot of dust. If you aren't able to move your item from its position, remove other objects from the room to protect them. This includes furniture, pictures, decorations, rugs, and any other furniture or items that may be in the room. [3]
    • Cover anything that can't be removed with a protective 6-mil plastic sheet. Tape the sheet in place so dust can't seep under.
  4. Protect the floor around the object you're stripping with 6-mil plastic sheeting. Use painter’s tape to tape the sheet in place. This will prevent chemical stripper, paint, and dust from damaging the floor below.
    • For a small object, spread out the sheet and place the item on top. For a large or immobile object, cover the ground around the object with the sheet.
    • Make sure you have an extra 6 feet (1.8 m) of plastic around the object. [4]
    • If you're stripping walls, cover the entire floor area with the sheeting and tape the plastic to the baseboards.
  5. Chemical paint strippers, paint, and dust are dangerous to breathe in, and you don’t want these things on your skin or in your eyes. Wear personal protective gear anytime you are stripping paint, and this includes: [5]
    • Chemical-resistant gloves, such as green nitrile or black butyl rubber
    • Wrap-around safety glasses
    • Long sleeves and pants
    • Respirator outfitted with cartridge for paint strippers, especially if you're working indoors
    EXPERT TIP

    "I use masking or duct tape to tape the end of my gloves to my shirt, so if the liquid stripper splashes, it doesn't get on my skin."

    Norman Raverty

    Professional Handyman
    Norman Raverty is the owner of San Mateo Handyman, a handyman service in the San Francisco Bay Area. With over 27 years of experience, Norman has expertise in all five of the general building trades (carpentry, ceramic tile, drywall, electrical, plumbing).
    Norman Raverty
    Professional Handyman
    6. Advertisement
Part 2
Part 2 of 3:

Applying a Chemical Paint Stripper

PDF download Download Article
  1. There are many types of paint strippers on the market, and they’re all good for different surfaces and areas. The chemical stripper you choose will depend on the object you're stripping (such as a wall versus furniture), how many layers of paint you're dealing with, and how old the paint is. [6]
    • Citrus-based strippers like CitriStrip are more environmentally friendly than their traditional counterparts. These strippers are generally good for up to four layers of paint at a time, and are ideal for flat surfaces and some furniture.
    • Pastes like SmartStrip and Peel Away 1 are ideal for tough jobs, and can even be used on uneven surfaces like brick. These types of strippers can remove up to 30 layers of paint at once, and require less scraping than other chemical stripper types. This type of stripper isn't great for furniture, as it can stain.
    • Some paint removers contain methylene chloride, which is an old, effective, and fast-acting chemical stripper. While this chemical agent is good for most surfaces and jobs, it is very caustic and releases a large amount of volatile organic compounds.
  2. Chemical paint strippers come in liquid, paste, and gel forms. Follow the manufacturer’s instructions regarding exact application quantities and techniques. Gel strippers like CitriStrip can be applied with a brush or roller. Pastes like SmartStrip and Peel Away 1 should be applied with a trowel. Liquids can be brushed or rolled on.
    • For two-part systems like Peel Away 1, apply the paper provided after you’ve coated the surface with the stripping agent.
    • For fast-acting strippers like methylene chloride, work in small areas if you're removing paint from a large surface, otherwise the stripping agent will dry. Apply the stripping agent to a small surface, let it dwell, scrape off the paint, and then move on to a new area.
  3. Dwelling time is the amount of time a chemical stripping agent must stay on a surface to properly soften and dissolve the paint. For most chemical strippers that contain methylene chloride, the dwell time is only 20 to 30 minutes. [7]
    • The dwell time for Smart Strip is between three and 24 hours.
    • The dwell time for CitriStrip is between 30 minutes and 24 hours.
    • The dwell time for Peel Away 1 is between 12 and 24 hours.
    • After the minimum time, you can begin testing a small patch to see if the paint will scrape off. If the paint isn't ready, give the product more time and then test again.
    4. Advertisement
Part 3
Part 3 of 3:

Removing the Paint

PDF download Download Article
  1. Once the chemical paint stripper has had time to soften and dissolve the paint, you'll be able to scrape the paint off the wall. Start at a section of bubbling paint and use a plastic paint scraper to get under the peeling paint. Hold the scraper at a slight angle out from the wall and push it under the paint to scrape it off. [8]
    • For two-part systems like Peel Away 1, you don’t need to scrape or scrub. Instead, just peel off the paper layer and most of the paint will come with it.
  2. Once you’ve scraped away the paint and stripper, you'll have to rinse the area to clean it. The scrubbing and rinsing method depends on the type of paint remover you’ve used: [9]
    • For Peel Away 1, scrub the surface with a wet nylon brush to remove residue. Leave the surface to dry, and then spray it with the neutralizing solution Citri-Lize. Scrub the area with a nylon brush, rinse with water, and allow to dry.
    • For SmartStrip, scrub the residue with water and a nylon brush. Rinse the area with a damp cloth and allow it to dry.
    • For CitriStrip, scrub the area with mineral spirits and a scratch-free abrasive pad.
  3. Sanding will remove dust, dirt, and any paint or chemical stripper that’s been left behind. Use a fine-grit sandpaper. For small surfaces, sand the area by hand or use a sanding block. For larger surfaces, use an orbital sander to make the work more efficient.
    • For wood surfaces, sand in the same direction as the wood grain to avoid swirl marks. [10]
  4. Use a damp rag or lint-free cloth to wipe down the entire surface that you’ve sanded. This will remove dust, paint, and chemical particles. [11] Rinse the cloth often if you're working with a large surface. After cleaning, let the surface dry. Vacuum the area to remove any leftover dust.
    • Once you’ve finished, you can paint or refinish the surface you just stripped.
    5. Advertisement

Expert Q&A

Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      Things You'll Need

      • 6-mil plastic sheeting
      • Painter’s tape
      • Chemical-resistant gloves
      • Wrap-around safety glasses
      • Respirator
      • Chemical stripper
      • Paint brush or roller
      • Painting tray
      • Plastic paint scraper
      • Nylon brush
      • Fine-grit sandpaper
      • Sanding block or orbital sander
      • Clean rags or cloths
      • Vacuum

      You Might Also Like

      How to
      Remove Paint from Walls
      How to
      Remove Paint from an Acrylic Tub or Bath
      How to
      Remove Paint from Wood
      How to
      Repair Peeling Paint
      How to
      Remove Paint from Vinyl
      How to
      Remove Primer
      The Top 4 Ways to Remove Powder Coating
      How to
      Remove Epoxy Paint
      How to
      Remove Paint from Iron Railings
      How to
      Remove Paint from Light Fixtures
      Advertisement

      References

      1. ↑ http://www.the36thavenue.com/how-to-strip-paint-refinish-wood/
      2. ↑ https://thecraftsmanblog.com/how-to-strip-paint-part-1-chemical-strippers/
      3. ↑ https://www.truevalue.com/diy-projects/paint-and-stain/strip-paint-from-wood/
      4. ↑ https://www.thisoldhouse.com/ideas/read-you-strip-paint-wood
      5. ↑ https://www.thisoldhouse.com/ideas/read-you-strip-paint-wood
      6. ↑ https://thecraftsmanblog.com/how-to-strip-paint-part-1-chemical-strippers/
      7. ↑ https://www.truevalue.com/diy-projects/paint-and-stain/strip-paint-from-wood/
      8. ↑ https://www.truevalue.com/diy-projects/paint-and-stain/strip-paint-from-wood/
      9. ↑ https://www.thisoldhouse.com/ideas/read-you-strip-paint-wood
      1. ↑ https://www.truevalue.com/diy-projects/paint-and-stain/strip-paint-from-wood/
      2. ↑ https://www.truevalue.com/diy-projects/paint-and-stain/strip-paint-from-wood/

      About This Article

      Article Summary X

      Before you strip paint off a surface, start by either moving the object outside or by covering indoor surfaces in plastic and opening windows to increase ventilation. Put on gloves, goggles, and a respirator to protect yourself, then apply a chemical paint stripper by either spraying, brushing, or rolling it onto the object, according to the instructions on the bottle. Leave the stripping agent on the surface for at least the minimum time listed on the package, then use a plastic paint scraper to remove the paint. Finish by rinsing, sanding, and dusting your object. To learn the differences between common chemical stripping agents, scroll down!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 121,286 times.

      Reader Success Stories

      • Carl Pennington

        Jul 8, 2017

        "I need to strip paint from a table (around 1936 - 37) which has had only one coat of paint. This is my first time ..." more
        Rated this article:
      Share your story

      Did this article help you?

      Advertisement