Download Article
Download Article
Giving something a fresh paint job is a great way to give it new life. But applying new paint over old paint can cause a variety of problems, including chipping, peeling, and bubbling. To prevent this, sometimes you have to strip the old paint before you can apply a fresh coat. There are a number of ways to strip paint, but the safest and most reliable method is applying a chemical stripper to loosen the bonds, and then scraping and sanding away the paint.
Steps
-
Move the object when possible. Removing paint is messy business, and if the object you're stripping is small enough, move it to an outdoor or semi-outdoor location before starting. This could be a patio, driveway, outdoor work area, or even an open shed or garage.
- Moving the item is ideal for small furniture, doors, fixtures, and other portable items. [1] X Research source
-
Provide ventilation. Sometimes it’s not possible to move the object you're painting, either because the item is too large or not portable, or because the weather won’t allow it. When you can't move the item outside, open windows, open vents, and turn on fans to provide plenty of fresh air in your workspace. [2] X Research source
- This applies when you're working with large and heavy furniture, walls, and other items that cannot be moved.
Advertisement -
Remove or cover nearby items. Paint stripping requires you to scrape and sand, and this produces a lot of dust. If you aren't able to move your item from its position, remove other objects from the room to protect them. This includes furniture, pictures, decorations, rugs, and any other furniture or items that may be in the room. [3] X Research source
- Cover anything that can't be removed with a protective 6-mil plastic sheet. Tape the sheet in place so dust can't seep under.
-
Lay down protective sheeting. Protect the floor around the object you're stripping with 6-mil plastic sheeting. Use painter’s tape to tape the sheet in place. This will prevent chemical stripper, paint, and dust from damaging the floor below.
- For a small object, spread out the sheet and place the item on top. For a large or immobile object, cover the ground around the object with the sheet.
- Make sure you have an extra 6 feet (1.8 m) of plastic around the object. [4] X Research source
- If you're stripping walls, cover the entire floor area with the sheeting and tape the plastic to the baseboards.
-
Protect yourself. Chemical paint strippers, paint, and dust are dangerous to breathe in, and you don’t want these things on your skin or in your eyes. Wear personal protective gear anytime your stripping paint, and this includes: [5] X Research source
- Chemical-resistant gloves, such as green nitrile or black butyl rubber
- Wrap-around safety glasses
- Long sleeves and pants
- Respirator outfitted with cartridge for paint strippers, especially if you're working indoors
EXPERT TIP"I use masking or duct tape to tape the end of my gloves to my shirt, so if the liquid stripper splashes, it doesn't get on my skin."
Norman Raverty is the owner of San Mateo Handyman, a handyman service in the San Francisco Bay Area. With over 27 years of experience, Norman has expertise in all five of the general building trades (carpentry, ceramic tile, drywall, electrical, plumbing).Norman Raverty
Professional HandymanNorman Raverty
Professional Handyman
Advertisement
-
Choose a chemical stripper. There are many types of paint strippers on the market, and they’re all good for different surfaces and areas. The chemical stripper you choose will depend on the object you're stripping (such as a wall versus furniture), how many layers of paint you're dealing with, and how old the paint is. [6] X Research source
- Citrus-based strippers like CitriStrip are more environmentally friendly than their traditional counterparts. These strippers are generally good for up to four layers of paint at a time, and are ideal for flat surfaces and some furniture.
- Pastes like SmartStrip and Peel Away 1 are ideal for tough jobs, and can even be used on uneven surfaces like brick. These types of strippers can remove up to 30 layers of paint at once, and require less scraping than other chemical stripper types. This type of stripper isn't great for furniture, as it can stain.
- Some paint removers contain methylene chloride, which is an old, effective, and fast-acting chemical stripper. While this chemical agent is good for most surfaces and jobs, it is very caustic and releases a large amount of volatile organic compounds.
-
Brush, spray, or roll on the chemical stripping agent. Chemical paint strippers come in liquid, paste, and gel forms. Follow the manufacturer’s instructions regarding exact application quantities and techniques. Gel strippers like CitriStrip can be applied with a brush or roller. Pastes like SmartStrip and Peel Away 1 should be applied with a trowel. Liquids can be brushed or rolled on.
- For two-part systems like Peel Away 1, apply the paper provided after you’ve coated the surface with the stripping agent.
- For fast-acting strippers like methylene chloride, work in small areas if you're removing paint from a large surface, otherwise the stripping agent will dry. Apply the stripping agent to a small surface, let it dwell, scrape off the paint, and then move on to a new area.
-
Let the stripping agent dwell. Dwelling time is the amount of time a chemical stripping agent must stay on a surface to properly soften and dissolve the paint. For most chemical strippers that contain methylene chloride, the dwell time is only 20 to 30 minutes. [7] X Research source
- The dwell time for Smart Strip is between three and 24 hours.
- The dwell time for CitriStrip is between 30 minutes and 24 hours.
- The dwell time for Peel Away 1 is between 12 and 24 hours.
- After the minimum time, you can begin testing a small patch to see if the paint will scrape off. If the paint isn't ready, give the product more time and then test again.
Advertisement
-
Scrape off the paint. Once the chemical paint stripper has had time to soften and dissolve the paint, you'll be able to scrape the paint off the wall. Start at a section of bubbling paint and use a plastic paint scraper to get under the peeling paint. Hold the scraper at a slight angle out from the wall and push it under the paint to scrape it off. [8] X Research source
- For two-part systems like Peel Away 1, you don’t need to scrape or scrub. Instead, just peel off the paper layer and most of the paint will come with it.
-
Scrub and rinse the area. Once you’ve scraped away the paint and stripper, you'll have to rinse the area to clean it. The scrubbing and rinsing method depends on the type of paint remover you’ve used: [9] X Research source
- For Peel Away 1, scrub the surface with a wet nylon brush to remove residue. Leave the surface to dry, and then spray it with the neutralizing solution Citri-Lize. Scrub the area with a nylon brush, rinse with water, and allow to dry.
- For SmartStrip, scrub the residue with water and a nylon brush. Rinse the area with a damp cloth and allow to dry.
- For CitriStrip, scrub the area with mineral spirits and a scratch-free abrasive pad.
-
Sand the area. Sanding will remove dust, dirt, and any paint or chemical stripper that’s been left behind. Use a fine-grit sandpaper. For small surfaces, sand the area by hand or use a sanding block. For larger surfaces, use an orbital sander to make the work more efficient.
- For wood surfaces, sand in the same direction as the wood grain to avoid swirl marks. [10] X Research source
-
Dust and clean. Use a damp rag or lint-free cloth to wipe down the entire surface that you’ve sanded. This will remove dust, paint, and chemical particles. [11] X Research source Rinse the cloth often if you're working with a large surface. After cleaning, let the surface dry. Vacuum the area to remove any leftover dust.
- Once you’ve finished, you can paint or refinish the surface you just stripped.
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Things You'll Need
- 6-mil plastic sheeting
- Painter’s tape
- Chemical-resistant gloves
- Wrap-around safety glasses
- Respirator
- Chemical stripper
- Paint brush or roller
- Painting tray
- Plastic paint scraper
- Nylon brush
- Fine-grit sandpaper
- Sanding block or orbital sander
- Clean rags or cloths
- Vacuum
References
- ↑ http://www.the36thavenue.com/how-to-strip-paint-refinish-wood/
- ↑ https://thecraftsmanblog.com/how-to-strip-paint-part-1-chemical-strippers/
- ↑ https://projects.truevalue.com/paint/staining/wood_surfaces/strip_paint_from_wood.aspx
- ↑ https://www.thisoldhouse.com/ideas/read-you-strip-paint-wood
- ↑ https://www.thisoldhouse.com/ideas/read-you-strip-paint-wood
- ↑ https://thecraftsmanblog.com/how-to-strip-paint-part-1-chemical-strippers/
- ↑ https://projects.truevalue.com/paint/staining/wood_surfaces/strip_paint_from_wood.aspx
- ↑ https://projects.truevalue.com/paint/staining/wood_surfaces/strip_paint_from_wood.aspx
- ↑ https://www.thisoldhouse.com/ideas/read-you-strip-paint-wood
About This Article
Article Summary
X
Before you strip paint off a surface, start by either moving the object outside or by covering indoor surfaces in plastic and opening windows to increase ventilation. Put on gloves, goggles, and a respirator to protect yourself, then apply a chemical paint stripper by either spraying, brushing, or rolling it onto the object, according to the instructions on the bottle. Leave the stripping agent on the surface for at least the minimum time listed on the package, then use a plastic paint scraper to remove the paint. Finish by rinsing, sanding, and dusting your object. To learn the differences between common chemical stripping agents, scroll down!
Did this summary help you?
Thanks to all authors for creating a page that has been read 116,937 times.
Reader Success Stories
- "I need to strip paint from a table (around 1936 - 37) which has had only one coat of paint. This is my first time doing this type of work, and needed help with items needed. Thanks, very helpful for me!" ..." more
Advertisement
85%
of readers found this article helpful
.
Click a star to add your vote
% of people told us that this article helped them.
"I need to strip paint from a table (around 1936 - 37) which has had only one coat of paint. This is my first time doing this type of work, and needed help with items needed. Thanks, very helpful for me!"
..."
more
