How to Tap a Keg

PDF download Download Article
PDF download Download Article

You have the keg, you have the cups, and you have a bunch of thirsty friends. But before you can pass out any drinks, you gotta tap the keg. Fortunately, it’s a fairly simple process that won’t take more than a couple of minutes. To successfully tap your first keg, read through this article and get the party started!

1

Get a “D” tap for a domestic beer keg.

PDF download Download Article
  1. In America, most kegs require a “D” tap . Quickly check that the grooves in the tap line up with the grooves in the top of the keg. You can also double check with the person you bought it from, because some imports will need a different tap. Other possible systems include: [1]
    2. Advertisement
2

Chill the keg for 1 hour before tapping it.

PDF download Download Article
  1. Grab a large, plastic bucket and fill up the bottom half with ice. Place your keg into the bucket, then pour ice all around it to keep the entire thing cool. As beer warms up, it tends to get foamy, so chilling it will help stop it from going to waste as it foams up and out of your cups. [2]
    • When it comes to kegs, the colder they are, the better. Start chilling it as soon as you bring it home, no matter when your party is.
    • Some beer experts swear by chilling your tap, too. This is optional, but if you want to make extra sure that your beer is cold, put the tap on ice for about 1 hour as well.
3

Lift the handle of the tap.

PDF download Download Article
  1. It’s a small step, but many people forget it—and it can lead to a huge mess! Before you start tapping your keg, grab your tap and make sure the handle is lifted up. Otherwise, beer will start spraying out right away.
    2. Advertisement
4

Line up the tap with the mouth of the keg.

PDF download Download Article
  1. If your keg has a plastic or cardboard cover on the mouth, take that off first. Then, insert the bottom of the tap into the keg. [3]
5

Turn the tap clockwise.

PDF download Download Article
  1. Push down on the tap lightly to keep the grooves centered. As you push, turn the tap clockwise about 90 degrees. You don’t have to twist very hard—once you feel the tap lock into place, you can stop.
    2. Advertisement
6

Pull the handle out and down.

PDF download Download Article
  1. Grab the handle and pull it out toward yourself, then gently push it down. Now your keg is officially tapped!
    • Do a quick check near the base of the tap to make sure it’s seated properly. If you see foamy bubbles escaping, take the tap off and try again.
7

Pour your first beer.

PDF download Download Article
  1. As you pour, keep the nozzle pushed down all the way to avoid adding any more foam. Your first beer will probably be a little foamy, so be prepared to pour some foam off the top. [4]
    • Contrary to popular belief, you actually don’t need to pump the tap before you pour your first beer. In fact, pumping too much too early can lead to extra foam, which just means more wasted beer.
    2. Advertisement
8

Pump the tap when the flow is slow.

PDF download Download Article
  1. As you pour beers throughout the night, keep an eye on how strong the stream is from the nozzle. If it turns into a trickle, grab the top of the tap and pump it 5 to 6 times. [5]
    • Pumping the keg too much can lead to—you guessed it—too much foam. Stick to 5 or 6 pumps at a time to avoid wasting any of your beer.
9

Lift the handle and turn the tap to untap the keg.

PDF download Download Article
  1. Pull the handle upwards on the tap to the “off” position. Then, twist the tap counterclockwise to unscrew it. You’ve now successfully untapped your keg! [6]
    • If you have a new keg, simply repeat the process on the full one to get the beer flowing again.
    2. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What can I do if my system has no pump?
    Community Answer
    In that case, you would just have to tip the keg so the tap is at a point below the level of the drink. Be aware, however, that beer or lager in kegs is usually carbonated by the pumping system, so expect your drink to be flat (or invest in a cheap tap with mini CO2 cylinders).
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
  • Question
    Do I need to make a hole in the bung a day before taping the ale?
    Gareth Wills
    Community Answer
    It's best to leave the keg to settle for at least 24 hours, then tap it and wait another 24 hours. This will let the ale settle nicely. For the best results, consider buying a spring rack which slowly tilts the barrel as it gets emptier.
    Thanks! We're glad this was helpful.
    Thank you for your feedback.
    If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
    Yes No
    Not Helpful 0 Helpful 0
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
      Advertisement

      Video

      Tips

      Submit a Tip
      All tip submissions are carefully reviewed before being published
      Name
      Please provide your name and last initial
      Submit
      Thanks for submitting a tip for review!

      You Might Also Like

      How to
      Buy a Keg
      How to
      Shotgun a Beer
      How to
      Remove a Bottlecap with a Key
      How to
      Chug a Beer
      How to
      Open a Beer Bottle
      How to
      Make Your Own Beer
      How to
      Change a Beer Keg
      How to
      Construct a Beer Bong
      Explaining the Differences Between Pilsners and Lagers
      How to
      Clean Your Hair With Beer
      How to
      Malt Your Own Barley at Home
      How to
      Drink and Taste a Beer Like an Expert
      How to
      Enjoy the Taste of Beer
      How to
      Order Beer
      Advertisement

      References

      1. ↑ https://d163axztg8am2h.cloudfront.net/static/doc/90/92/af37dd51fbf1629cc91270a5eb38.pdf
      2. ↑ https://www.thekitchn.com/should-you-just-get-a-keg-239518
      3. ↑ https://static1.squarespace.com/static/592f1146f7e0abbb80a12df5/t/5d0a4a492c88210001f4e9d4/1560955473913/SpecialOrder_KegHowTo.pdf
      4. ↑ https://static1.squarespace.com/static/592f1146f7e0abbb80a12df5/t/5d0a4a492c88210001f4e9d4/1560955473913/SpecialOrder_KegHowTo.pdf
      5. ↑ https://www.youtube.com/watch?v=aaxrhJS6r3k&t=109s
      6. ↑ https://www.hogtownbrewers.org/brewschooldocs/draft-system-primer.pdf

      About This Article

      Article Summary X

      To tap a keg with the American D, European S, or U systems, remove the plastic or cardboard cap from the top of the keg. Ensure the lever on the pump is pulled up, then seat the pump into the opening on the keg valve. Push the tap system down on the keg valve, then twist the tap clockwise about 90 degrees. Pull the pump lever out and push it down to engage the tap. If you see bubbles or foam escaping around the tap, disengage the pump and reseat it. If you need to learn how to tap a German A & M system or a Grundy G keg, keep reading!

      Did this summary help you?
      In other languages
      Thanks to all authors for creating a page that has been read 347,376 times.

      Reader Success Stories

      • Winni Ginni

        Jan 8, 2017

        "This was my first time tapping with a G. Easy peasey using your guide. Thanks so much!"
      Share your story
      If you buy through links on our site, we may earn a commission .

      Did this article help you?

      Advertisement